What should I do if there is a water leak on the front windshield of my car?

When you find that the front windshield of your car is leaking, it is best to go to a 4S shop or a regular repair shop for maintenance.

If it rains all the time after changing the windshield, causing water leakage on the upper edge of the front windshield, this situation may be on the one hand in the glass glue.

When it is not solidified, it rains, resulting in water leakage; On the other hand, when replacing the front windshield, the installation is not in place, or the installation is not standardized, and the glass is not sealed well, resulting in water leakage. If the problem caused by the rain is your own, you can go to the store to repair the glue and install the sealant.

Strip. If the installation is not in place, or the installation is not standardized, this is the problem of the construction personnel, and you can go to the store to ask for reinstallation or other remedial measures.

1. The windshield is not broken and the water leakage is generally a sealing ring.

If the sealant and metal frame are rotten and damaged, the windshield should be removed, the original sealing material (sealant) should be removed, the damaged parts should be repaired, the windshield should be reinstalled, and the new sealant should be waterproofed.

2. When replacing the glass, I am afraid of the situation that the sealing is not tight, and I can solve the situation first, you can clean the upper edge of the glass, blow it clean with a wind gun, and seal it with glass glue after the water is completely dry;

3. Do not wash the car within three days after sealing, so as to save trouble and economy, and generally solve the problem, polish the leaking place, use white glass glue, and apply a layer on it. If you can't solve it anymore, you can only change the glass, and remind you to play more sealant when you change it.

Go to the 4S shop or comprehensive repair shop to check, if it is a sealing problem, you need to remove it and re-glue.

The windshield is not broken and the water leakage is generally caused by the decay and damage of the sealing ring, sealant and metal frame, the windshield should be removed, the original sealing material (sealant) should be removed, the damaged part should be repaired, the windshield should be reinstalled, and the new sealant needs to be waterproof, and the sealant is not completely dry before driving.

A car is a vehicle that can be driven by its own power and does not need to be erected by rails or electricity, and can be driven by motorization. Broadly speaking, a vehicle with four wheels is generally called a car.

There are many cars in the world, and each country's car has its own characteristics, safety, speed, comfort, and endurance. That's why when you buy a car, you have to choose which model according to your own situation.

The car logo usually refers to the logo of the company where the car is located, and is generally the main logo of the car on the front of the car grille** or the engine cover.

If the air humidity is relatively large, the engine will spew out hot water vapor at the moment of starting, and the cold windshield will liquefy. Does it mean that it only happened after driving for a while, or did it appear after stopping for a night at night?

The car windshield leakage is caused by the aging of the glass sealant, and the solution needs to remove the front windshield entirely, and then re-apply the glass glue, and install it. Finally, under the sprinkler test.

After the car has been used for a long time, some front windshields or rear windshields have water seepage, and water seepage occurs after replacing the glass. These water seepages usually occur at the joints of the rubber pads around the windshield. The cause of water seepage is the aging of the rubber pad or the glue is not cleaned when replacing the front and rear windshield glasses, such as broken glass and other foreign objects left in the joint, causing gaps.

If water leakage occurs when it rains or when washing the car, if it cannot be treated in time, the glass part combined with the glass is prone to rust and rot.

The tools used to deal with water leakage include glass glue, warp card, rag and clean water. The processing steps are;

1. If there is water seepage under the front windshield and enters the car, remove the wiper arm and ventilation cover, clean the foreign objects and dirt at the joint with water and a rag, and then blow it clean with a blow gun.

2. If the leakage is above, first clean up the surroundings and then apply glass glue. It can also be sealed with sealing tape.

Hello, your front gear leakage may be due to the car front block glue is not good. If you replace the glass later, then you should find the replacement master in time to repair it.

Hello, the leakage of the front windshield of the car is caused by the damage of the sealing ring, and it is recommended to repair and replace it in time.

The front windshield will do, or remove the front windshield and re-glue it.

Go to the repair shop and check it out. Hope.

The leakage of the front windshield of the car is generally caused by two reasons, one is that the glass strip is not pressed or damaged, and the other is that the drainage groove is blocked and damaged, or the water is not discharged to the outside of the car but to the car, but for the specific leakage part, it is necessary to go to the repair shop for further on-site testing and inspection according to the actual situation.

If you find that the front windshield of the car is leaking, it is best to go to a 4S shop or a regular repair shop for maintenance. The general procedure is to cut (remove) the windshield first, clean the frame, and then apply black waterproof glass glue. Then glue the windshield on and align, and then glue the windshield with transparent tape on the edge of the windshield to play a fixed role, after 12 hours, remove the tape, but do not wash the car within 1 week.

Wait for the glass glue to dry thoroughly and fix before brushing the car.

In winter, the temperature in the car is high, the outside temperature is low, there is a temperature difference, and the car absorbs the outside moisture and forms water vapor.

There is fog water outside the front windshield of the car when the air conditioner is opened, because the temperature outside the car is lower than the temperature inside the car, so that the water vapor in the car forms many tiny water droplets, and the surface of the front windshield is not absolutely flat (there are many small pits), so these small water droplets are attached to the front windshield, which is the reason for the formation of fog on the glass.

Car windshield precautions.

In the usual glass maintenance process, we must choose the right glass water according to the specific conditions of the season and weather, when we find that the surface of the windshield is blurred, it will be much brighter to clean with the right glass water. If you find that the glass is reflective at night, you can also wipe it with glass water. In addition, in the case of running at high speed or dusty, the glass water will be used very quickly, and it is also necessary to pay attention to the immediate injection of new glass water.

Automobile heat insulation film is divided into front and rear windshield film and side windshield film. Among them, the front windshield has the highest requirements for heat insulation film. According to national regulations, the light transmittance of the front windshield must be greater than 70%, on the premise that it does not affect driving safety.

The front windshield is most taboo to paste dark heat insulation film. In addition, when choosing a UV resistance index for the heat insulation film, the higher the better, because it protects the center console components from premature aging due to long-term sun exposure.

Normally, the water mist is inside the car, because it is raining outside and the temperature drops, you can't open the windows, causing the temperature inside the car to be higher than the outside, and the glass windshield at the interface between the inside and outside will produce water droplets due to the condensation of the water vapor in the car

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

The front windshield is generally laminated glass, and there is water in the middle that water enters this interlayer, and it is generally only replaced.

The most important thing to change the glass is the glue technology, so try not to change the glass if it can not be replaced, and it is easy to hurt the paint surface under the glass glue when disassembling the glass, and it will rust once it is damaged. If the glue is not good, it will also leak.

This is not necessarily, it depends on the skill of the master who changes the glass, under normal circumstances, more than 90 will not leak, this situation also has, but very little, if there is time before the change, supervise the master a little, if you don't have time, tell me, basically it will not leak.

The most important thing to change the glass is the glue technology, when the glass is disassembled, the paint surface under the glass glue may be damaged, and once it is damaged, it will rust, resulting in water leakage.

Try not to change the glass if it can not be replaced, but the glass is broken and the vision is blocked or it has leaked, so you should pay attention if you have to change it:

1. If conditions permit, try to go to the brand 4S store to replace, because the 4S store provides the original production of parts, which has the highest matching degree with the car, and has a better after-sales service after the problem.

2. If the conditions do not allow, negotiate the corresponding after-sales service with the repair party as much as possible, and supervise the whole process, and keep the corresponding bills after the glass is replaced.

3. After replacing for a period of time, there is still water leakage, and it will be more difficult to repair, and it is still necessary to replace and glue again, so we must pay attention to requiring the repair party to do a good job in after-sales work.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! The main reason for the water leakage on the front windshield of the car is that the glass glue has been glued for a long time, aging, and the hardening and sealing can not be done!

Treatment plan: Remove the front windshield, and then remove all the glue on the original car. Re-glue and put the glass back on!

There is also a place where the car is more prone to water leakage, which is the blockage of the sunroof drain of the sunroof model with a sunroof. Therefore, it is recommended to clean the skylight drain regularly during maintenance. Avoid the skylight not being able to drain the water into the room after heavy rain, causing some unnecessary consequences.

What should I do if there is a water leak on the front windshield of my car?

Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! The main reason for the water leakage on the front windshield of the car is that the glass glue has been glued for a long time, aging, and the hardening and sealing can not be done! Handling Scheme:

Remove the front windshield, and then remove all the glue from the original car. Re-glue and put the glass back on! There is also a place where the car is more prone to water leakage, which is the blockage of the sunroof drain of the sunroof model with a sunroof.

Therefore, it is recommended to clean the skylight drain regularly during maintenance. Avoid the skylight not being able to drain the water into the room after heavy rain, causing some unnecessary consequences.

Is it okay to hit the glass glue directly on it?

It's okay to hit it directly. Although this is relatively simple, the main reason is that I am afraid that there will be other leaks after you deal with this place. You can also simply glue from the outside, deal with the leakage first, and then talk about it later.

The latest 3 articles.

Anonymous usersHello, this is a poor physical change in the room, which is normal. You can use the air conditioner to open and blow the windshield. Hope it helps, I wish you a nice drive. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Anonymous usersHello, this is the fog, turn on the air conditioner to blow down the glass blowing mode, I hope mine is helpful to you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

You are the only one in my life.

The front windshield is generally laminated glass, and there is water in the middle that water enters this interlayer, and it is generally only replaced.

Onapoli has water because the windshield is not sticky properly, causing water leakage inside.

Has your car just been washed? The water inside is not clean, there is fog, dampness, isn't it? That's why there will be water on the windshield.

Water on the front windshield of the car means that there is moisture in the car, or the temperature inside the car is higher than the outside of the car.

It should be a leak in the glass, you can check it.

Hello According to your description, if the storage tank of glass water leaks, it is recommended to replace it immediately. The glass water storage tank cannot be repaired, and it is natural that the leakage can only be replaced with a new one. The car's glass water storage tank is in the engine compartment, some cars have the storage tank behind the headlights, and some cars behind the fenders.

Changing the glass water storage tank is quite cumbersome, because there are many parts that need to be dismantled.

Glass water is an item that every car owner will basically come into contact with during the car use process, and glass water can be used to clean the windshield.

In the case of using glass water in winter, it is necessary to choose a product with a low freezing point, otherwise glass water is very easy to freeze in winter.

When the liquid freezes, it will become larger, which can easily damage the glass water storage tank and affect the glass water storage tank leakage.

If there is a glass of water in the pipeline of the glass water injector, it is very easy to affect the pipe burst.

If the glass water storage tank is hit, it is also very easy to leak.

When using the car on a regular basis, it is necessary to prevent the glass water storage tank from being impacted.

In the case of low level of glass water, it must be added immediately, and the pump of glass water must not be rotated without glass water, which is very easy to affect the pump to burn.

After adding the glass of water, it is necessary to close the lid of the storage tank, otherwise it is very easy for dirty items to enter the glass water storage tank. Hope mine is helpful to you, hope, thank you!

The solution to a leaking glass water tank in a car is: replace the glass water tank or the connected water pipe. The car glass water tank is located in front of the engine and is a container for storing glass water, which is used for car glass, and its function is to clean, decontaminate and prevent corrosion.