If you want to effectively solve the problem of window leakage, what should you pay attention to?

A leak in my house would be stuffy. One area that often appears and that is expected in many homes is the leakage of our windows. The window sill leaks, and the window sill we see is wet underneath, but there may be two specific reasons for the leakage.

The first is a leak from the window itself, and the second is a leak around the window frame. So if we want to solve the leakage of the window sill, we have to work on these two points. Let's analyze the causes and solutions of window leakage.

The first point is that the drain on the window is blocked and the water cannot be removed, and then it is left along the window sill, and the window sill is leaking. If you notice a leak on the window sill, you can open the window and make sure that the window frame is full of water. At this time, through the inside, the water looks filled and overflows.

The second point is to check various places such as the window frame itself and the sealing of the glass. That is, to inspect the windows carefully. Let's see if the window is leaking, where there are steel joints in the window, where the glass is sealed, or if it is leaking due to tight sealing.

The third point is to check the part where the window is tangent to the wall, that is, the part where the window frame is tangent to the wall, to ensure that there is no water leakage. Window sills are leaking, mostly due to this reason, and we need to check carefully. The first scenario is that if the window frame itself is found to be leaking, the window drain will be blocked.

When it rains, the rainwater does not drain smoothly and then overflows, and the windowsill leaks.

The windows themselves are leaking. These include the sealing of the steel and glass of the windows. The inspection method is also very simple.

If there is a leak, I look closely inside the window to see if there are any signs of water flowing on it. If the water keeps flowing down the window and you find that the windowsill is wet, it is a leak from the window. At this time, we should also find a window manufacturer, or find a company that specializes in repairing doors and windows to repair.

Water leaks in the area where the window frame comes into contact with the wall. The causes of this leakage are caused by irregular window settings. We know that when installing windows, sealant is usually applied between the window frame and the wall, the crack mortar is carried with a waterproof road, and finally the structural weathering glue is applied to deal with it.

Many manufacturers do not apply sealant at the time of installation, but instead apply cement mortar or direct sealant. This way, if there is a slight gap in the sealant, water will seep in. The solution is to double-check the sealant outside the window.

Usually somewhere in the sealant the adhesive will be opened. Finding the part where the glue is open, removing the sealant there, and then applying the glue will basically solve the penetration of the window.

Pay attention to: glass glue firm, glass glue age, window sill water, window groove water, exterior wall waterproofing. Window leakage is often not paid attention to the age of glass glue, the durability of each brand of glass glue is different, choose a long durability time, the window is not easy to leak.

Window leakage is sometimes not the problem of the window, but the water leakage caused by the failure of the exterior wall waterproofing, and redo it.

If the window leaks, you can use glass glue to seal the window. Some time ago, the windows in our house were also leaking, and then my dad used glass glue to put a layer of glass glue around the window, so that the sealing was much better, and there was no air leakage. Of course, if you don't know how to deal with it, you can also find a professional to do it, I don't know how your property is, if you really have a problem, you can also find the relevant personnel of the property, we have a person who is responsible for the maintenance of the property.

What needs to be done is to choose good windows, choose the most expensive windows, and there can be no cracks in the process, and when it rains, it can also avoid water leakage, which will lead to a lot of water indoors.

1. When the weather is sunny and the original stagnant water is confirmed to be dry, remove the glass and paste a tile on the window sill again (note that when pasting tiles, you must stick an outward inclined slope, and if there is water, it will flow out directly).

2. Re-apply glass glue at the joint between the tile and the window frame, and then install the glass.

3. Without affecting the stability of the window, make the drainage hole slightly larger, and the lowest point of the drainage hole must not be higher than the window groove, otherwise there will always be water in the window groove.

4. Clean up the dust and residue in the window groove regularly. (especially the location of the drain holes).

I think when solving these things, we must pay attention to the size and seams of the window, and secondly, it is better to use some transparent glass glue, and at the same time, we should also use some glue to re-glue a layer of glass.

Causes of window leakage:

1) The window may not have drainage holes, especially the sliding window, all the rainwater accumulates in the sliding frame groove and cannot be discharged, and it seeps into the house after it is full, or the drainage hole is blocked when the external window sill is tiled, and the rainwater in the sliding frame groove will all seep into the wall and cause water leakage.

2) The installation of windows is not standardized.

3) The wall itself is leaking.

Workaround:1The sealing strip of the window must be a whole piece, and the interface must be selected on the upper part of the window, preferably connected with glue. Good sealants smell like natural rubber, while bad ones are hard, crackable, and have a pungent smell.

2.If there is a water leak caused by the gap between the window frame and the wall or window sill, the gap can be resealed. For the gap between the outside window frame and the wall window sill, it is best to remove the original seal and fill in the weather-resistant glass glue for sealing; For the gaps between the window frame and the window sill outside, it is best to remove the original seal, fill in the weather-resistant glass glue for sealing, and then seal it with mud and mortar for waterproofing.

3.For leaks caused by clogged gutters in the window frame, keeping the gutters open can solve the problem. If there is a problem with the location of the drainage hole, the original hole needs to be closed and reopened.

There are many reasons for window leakage, and the methods taken are also different. The common causes and methods of window leakage are as follows: 1. The dripping eaves are damaged

When renovating the balcony, some owners move the window outward and press it to the dripping eaves, and the rain will enter the cracks between the window frame and the wall, and the water will leak from the upper part of the window. Solution: Install drip eaves at the entrance of the hole (through connectors or glue bulges and other forms) so that the water can be discharged smoothly.

2. The drainage hole is blocked: the bottom of the plastic steel window is equipped with a drainage hole, but it will be blocked if you don't pay attention to it during installation, and once there is heavy rain, the water in the window frame will seep from the installation of the expansion bolt. Solution:

Check whether the window is connected by a bulging bolt, if it is a temporary glue to the inside to seal the effect, and then re-glue after the rainy season. If it is fixed under the glass, it is necessary to wait until the rainy season has passed, open the glass, remove the water in the window frame, and then re-apply the glue. 3. Water leakage caused by loose and deformed windows

Water leakage caused by loosening between the window and the frame is the most common cause. On the one hand, when the door is closed, the window will also resonate and vibrate, and the gap between the window and the wall will become larger and larger over time; On the other hand, it is caused by the poor quality of the window, the strength of the poor quality window is not enough, it is easy to deform, and the mortar layer at the edge of the window frame will crack and fall off soon after use, which will cause leakage. Solution:

If the water leakage caused by the quality of the window itself is damaged, the window needs to be repaired or replaced directly. The quality of the purchased window frames, window sashes, sealing strips, etc. should be passed, and the waterproof sealing materials used should have material quality certification documents to ensure that the quality of the materials meets the requirements, and do not choose inferior sealing materials. 4. Water leakage caused by damage to the waterproof layer of the wall near the window

In older houses, the waterproof layer of the walls around the windows is damaged, and water leakage is likely to occur; In addition, when the windows are replaced in the renovation of the old house, the damage of the waterproof layer of the exterior wall caused by the unprofessional removal of the windows, and if it is not repaired in time, it is very likely that there will be water leakage after the installation of new windows. Solution: The window wall itself is leaking, the solution is to knock on the outer wall, repair, check whether it is firm after repairing, and remember to lay a waterproof layer.

If the window leakage is very serious, it is recommended to find a professional master to repair it.

If the indoor house leaks or the window leaks, use polyurethane transparent waterproof glue, brush it directly, and stop the leakage with a brush.

Material is key. In order to prevent heat from entering the room, the aluminum alloy at both ends must be connected together with high-quality thermal insulation strips, which can not only ensure the practicality of strength, but also ensure thermal insulation.

Three seals. Effectively prevent rainwater from entering the room through the action of outdoor wind pressure, adding an extra layer of protection for the sound insulation and waterproofing of doors and windows.

Concealed drainage.

It avoids the direct blowing of wind to the drainage hole, reducing the chance of rainwater being backpiped by the wind.

Composite sealing strips.

The design of soft and hard composite can not only be waterproof, dustproof and windproof, but also weaken the impact of wind on doors and windows.

Hello, the simple way to deal with the leakage of the window sill in general is:

1. Clean the base surface and moisten it thoroughly.

2. Fill the gaps with caulk if there are obvious cracks.

3. Brush three to four times with acrylic high-elasticity anti-crack waterproof coating along the aluminum alloy frame, and the next time the surface can be painted after each surface drying.

Note: If there is an anti-theft net, the nail that fixes the anti-theft net must be sealed with paint.

In fact, it is better to find a professional to help you deal with it! In the future, choosing a better decoration company before decoration will also reduce this kind of problem!