After the bay window is finished, how to solve the waterproofing

1. The non-detachable bay window is waterproof.

If the bay window cannot be removed, then the waterproof treatment method is like this, first knock off the original plaster of about 15 cm wide at the connection between the window frame and the wall, and then expose the red bricks, brush the waterproof twice on the red bricks, and then use cement mortar plastering, cement mortar mixed with waterproof materials, After plastering is completed, you can brush it again, the purpose of this is to ensure that the connection between the window frame and the wall is sealed without hollowing, otherwise, the rainwater will seep into the room along the gap of the window frame. It leads to mold and peeling in the room;

2. Detachable bay window waterproof treatment.

Some families may dismantle the bay window that can be removed, and then re-make a bay window cabinet that can be stored, wardrobes and other cabinets, so this kind of waterproofing is even more to do, if not waterproof, when the time comes to leak and seep water, the cabinet can not be saved, then this practice is to remove all the bay windows painted with waterproof paint, if you can do the best to paint the entire wall of the bay window, so that you can effectively do foolproof.

3. Hit waterproof sealant.

When the connection between the wall and the window frame is treated, and then the connection between the window frame and the glass can be treated, we can use waterproof sealant to seal the gap between the window frame and the glass, and the requirements are to be smooth, smooth, without holes and chips.

4. Window drainage holes.

In the process of waterproofing, it is necessary to ensure that the windows have drainage holes, which can effectively prevent rainwater from hitting the window frame when it rains, and the rainwater can be drained out without seeping into the room.

5. Install a water baffle on the inside of the window frame.

The next thing to do is to install a water baffle on the inside of the window frame, generally the material used is stainless steel plate, the height is 5 to 8 cm, and glue it to the lower frame of the window frame to become a water baffle, which can effectively prevent the overflow of rainwater.

6. The outer bay window is used as a drip trough and slope surface.

The top and bottom of the outer bay window should adopt the structure of the drip trough, and the slope surface should be made, that is, the inside is high and the outside is low, so as to prevent water accumulation at the top and bottom of the bay window.

7. Brush waterproof paint.

When the waterproofing of the interior wall is treated, the next step is to check whether there are holes or gaps in the exterior wall, if there are gaps, then it is necessary to brush waterproof paint to block them, so as to prevent rainwater from seeping through these holes or gaps.

Many people will dismantle the bay window that can be removed, and then make a bay window cabinet that can be stored, wardrobes and other cabinets, so this kind of waterproofing is even more to do, if not waterproof, when the time comes to leakage and seepage, the cabinet can not be saved, then this practice is to remove the bay window all painted with waterproof paint, if you can do the best to paint the entire wall of the bay window to ensure that nothing goes wrong;

My family's is more troublesome. In winter, the windows are foggy, there is a lot of airflow and water, and the cement slab under the bay window in two winters.

The cement is gone, the insulation is not good, the wall is still moldy, and the rain will flow into the house from below in the summer.

You can choose transparent waterproof adhesive for the material, open it and apply it directly, mainly brushing the joints of the gaps and window exterior walls. There is no gap between the window frame and the wall, and there is no hollowing. If the details are not in place, the rainwater will seep into the house from the gaps in the window frame on rainy days, causing the bay window to become moldy or peeling, which means that the waterproof construction is not done well.

It can be a good way to prevent rainwater from entering the room and leaving it on the bay window, and some people will knock down the bay window to make a bay window cabinet, this kind of waterproofing must be brushed with waterproof on the wall of the bay window, so that it can be well prevented. If you need to do waterproofing, the edge of the bay window is generally close to the outside of the window, and it is easy to float in when it rains, and the bay window cabinet or bay window cover inside will be soaked or cracked over time.

The bay window must be waterproof, the bay window is also a window, and the window and the wall will not fit tightly. There are many ways to do waterproofing, exterior wall cement painting, or the structure is called sealing. After a few years sealant.

Aging on the rain leakage, the bag board is also damp, because it is a high-rise do not dare to go out to repair, because are acquaintances to live you can't run, you don't repair people say you for money, to the line can not be repaired, people say you are too dark, or not to decorate the best.

If it's gone, do it yourself. You want to make sure that the water is coming in from the exterior wall and not through the window joints of the bay window. If the sealant is good, it's fine, if it's not good, just hit the sealant again, and it's basically no problem!

The quality of the windows is also very important, and there is a big difference between the north and the south, so if you want to take specific precautions, find experienced workers or manufacturers in the local area to solve it.

After the bay window is knocked out, it will not leak, but it must also be waterproofed, and the bay window is generally embedded and does not extend outward, so it will not leak.

It will leak, because after the bay window is smashed, it is equivalent to smashing the waterproof and thermal insulation layer of the exterior wall, and the developer, the property is generally not allowed to renovate the bay window, so it is said.

The bay window built by the developer with bricks in the later stage can also be demolished. The outer bay window must not be demolished, this kind of bay window is linked to the stability of the wall, plays a certain balancing role, and some are also linked to the air conditioning pipeline, the removal may be endangered, and it will be repaired at that time, which is very troublesome. There is also a bay window made of reinforced concrete, which can never be demolished, the steel bar means that it plays the role of the wall load-bearing, and the whole building, are related, if once demolished, it is likely to produce the collapse of the house.

After the bay window is smashed, the waterproofing of the exterior wall will also be destroyed, so that when it rains, the rainwater will seep into the house, and the protective layer of the outer cavity will also be destroyed, so that the warmth of the house will be reduced, and the cold in the house will be felt in winter.

This varies from case to case. If it is a real bay window, it will leak after it is knocked out, and a fake bay window will not have such a consequence.

I don't think the bay window will leak after it is knocked out, because the bay window is in the room, and there is very little water in the bedroom.

I thought it would definitely leak, and if I knocked it out, then there would be no protection, so it would definitely leak.

There are three reasons why a bay window leaks:

1. The dripping eaves were damaged.

When renovating the balcony, some owners move the windows outward and press them to the dripping eaves, and the rain will enter the cracks between the window frame and the wall, and water will enter from the upper part of the window.

Solution: Install drip eaves at the entrance of the hole, and make the water flow out smoothly through various forms such as connectors or glue bulges.

2. The seal is not tight.

The eaves of the windows are not glued with glass, or the glass glue is not sealed tightly by hand, resulting in water seeping into the room.

Solution: After the rain stops, the water vapor in the window frame is drained and then re-glued, and the gap can be pressed tightly by hand after gluing.

3., the drainage hole is blocked.

The bottom of the plastic steel window is equipped with drainage holes, but if you don't pay attention to it during installation, it will be blocked, and once there is heavy rain, the water in the window frame will seep from the installation bolt.

Solution: Check whether there is dirt in the drainage hole first, and clean it up if there is dirt. If the hole is blocked during installation, the easiest way to repair it is to wait for the window frame to drain the water vapor and open the glass, clear the water in the window frame and then re-apply the glue.

When installing the windows, the bottom is connected with a piece that does not damage the inner window frame and does not cause water seepage.

It needs to be waterproofed. There are two types of bay windows, one that is non-detachable and the other that is removable.

Bay windows, generally rectangular or trapezoidal protruding to the outside, are glazed on three sides. There are two types of bay windows, the outer bay is convex, the inner float is flat and concave, the outer bay window is generally glass windows on three sides, protruding from the wall, and the bottom is volleyed, and the inner bay window generally has one side of glass and two sides are walls, which is relatively safe, but will occupy indoor space.

Large lighting glass and spacious window sills give people a broader vision and give life a romantic and warm color. The bay window, as the name suggests, is the window that floats out. A general bay window can be rectangular or trapezoidal and protrude from the interior to the outside.

The bay window is glazed on three sides, and the height of the window sill is lower than that of a normal window. This design not only facilitates large areas of glazing, but also retains the spacious window sills, so that the interior space can be visually extended.

It needs to be waterproofed.

We divide the bay window into two kinds, one is not detachable, the other is removable, then the two waterproof methods will be different, let's talk about the non-detachable bay window waterproof!

The waterproof treatment method of the non-detachable bay window: first knock off the original plastering of about 15 cm wide at the junction between the window frame and the wall, and then expose the red bricks, brush the waterproof twice on the red bricks, and then use cement mortar plastering, cement mortar mixed with waterproof materials, after the plastering is completed, you can brush again, the purpose of this is to ensure that the connection between the window frame and the wall is sealed without hollowing, otherwise, the rainwater will seep into the room along the gap of the window frame, resulting in indoor mildew, peeling and falling off.

Detachable bay window waterproof treatment method: many people will dismantle the bay window that can be removed, and then re-make a bay window cabinet that can be stored, wardrobe and other cabinets, so this kind of waterproofing should be done, if not waterproof, when the time comes to leakage and water seepage, the cabinet can not be saved, then this practice is to remove the bay window all painted with waterproof paint, if you can do the best to paint the entire wall of the bay window to ensure that nothing goes wrong. For the rest of the bay window, waterproofing should do this:

Hit with waterproof sealant.

After the connection between the window frame and the wall is treated, the next step is to deal with the connection between the window frame and the glass, and seal the gap between the window frame and the glass with waterproof sealant, which is required to be smooth, smooth, and free of holes and gaps.

window drain holes.

Make sure the windows have drainage holes to prevent rainwater from hitting the window frames when it rains, so that rainwater can drain out and not seep into the room.

A water baffle is installed on the inside of the window frame.

Generally, a stainless steel plate with a height of 5 to 8 cm is glued to the lower frame of the window frame to become a water baffle, which can effectively prevent the overflow of rainwater.

Make a drip trough and slope surface outside the bay window.

The top and bottom of the bay window should be made of drip trough structure, and the slope surface should be made, that is, the inside is high and the outside is low, so as to prevent water accumulation at the top and bottom of the bay window.

The exterior wall of the bay window or the bay platform has holes and gaps in the waterproof paint.

After the waterproofing treatment of the interior wall, Master Bang maintenance suggests that the exterior wall should be checked for holes or gaps, and if there are gaps, waterproof paint should be brushed to block them, so as to prevent rainwater from seeping through these holes or gaps.

What should I do with a bedroom bay window? Bay window, new Chinese furniture, tatami mats, custom furniture

Hello! Decide according to your actual situation! If you haven't done it before! Now it can be remedied!

Of course, you have to do this, otherwise it will seep water on rainy days, and generally waterproof ones will help you solve the problems you encounter.