What should I do if the aluminum alloy windows at home are not closed tightly?

When the window frame is installed, it should be kept horizontal and vertical, when horizontal and vertical.

When there is a deviation, the window frame will have a distorted shape, and the inner sash will be difficult to close after the window frame is installed. If the windows at home are not closed tightly, you can only ask a professional master to help repair them. The gap between the size of the opening sash and the frame mouth is not tight, or the sealing strip is aging.

The solution is to replace the seal, preferably EPDM.

The ability to resist aging is stronger; BalconyCasement windowsAfter a long time, some will appear to be not tightly sealed, which is related to the hardware accessories, sealing strips, casement window opening and screws loosening, and the installation quality of window frames is not standardized.

<> after no problems were found in the outer frame, there was still a problem with the inner fan, which must be a problem with the inner fan, and most of the inner fan was an installation problem and a problem with the village material itself. You have to find a professional It doesn't cost much, and if you haven't done this job, you can't do itHowever, there are still air leaks, and even water leaks may occur when it rains, which are all manifestations of not being closed tightly. So how to deal with this kind of problem?

The household miscellaneous altar takes the following question as an example to answer the problem of loose windows.

Do you see a small horizontal line on the connecting rod lock point, which is an eccentric lock point, with a hex wrench.

Just turn the lock point to the right position. If the rubber strip falls off, it is recommended to replace the rubber strip, and the one with EPDM will be better, with better toughness and relatively high deformation resistance. If the hardware is shifted, you need to look at the specific situation, debug the hardware, it is recommended to find the purchased door and window brand after-sales, if there is no brand after-sales guarantee, you may need maintenance personnel to come to debug.

There may be several cases when the doors and windows are not closed tightly, the first is to buy inferior doors and windows, the second is that the doors and windows are not installed well, and the third may be the form deformed, it is recommended to apply for after-sales, let professional personnel come to repair, doors and windows are still recommended Foshan brand is better, Foshan Bailima doors and windows, your door and window customization expert!!

We must pay attention to two points, one is to combine the house type of your own home, because the house type is different, the designed structural space is also different, and the other is to plan the function reasonably, such as if the space is sufficient, it is best to reserve a shoe change stool, and then leave the middle and bottom of the entrance cabinet empty, so as to fully realize the practicality of the later stay.

The aluminum windows there are not tightly closed, you can go to a professional master to help repair them, or you can remove them and reinstall them yourself.

The best thing to do is to add a ring of sealing strips to the window, so that the previous gap can be plugged without air leakage.

As long as there are the following reasons, different reasons have different solutions, as follows:

1. The quality of the sealing strip is defective or aging, and the poor quality sealing strip is very fragile, easy to corrode and break, and cannot achieve the sealing effect; As well as the poor installation of the sealing strip, unevenness or bulging, these situations will lead to air leakage and water seepage, which need to be checked and replaced by the owner in time.

2. The door and window profile is uneven, the tightness between the door and window sash and the frame, the flatness of the profile is an important factor affecting the tightness, if the flatness of the profile is not enough or deformed, there will be a certain gap between the door and window sash and the frame, resulting in air leakage. In view of this situation, it is necessary to contact the door and window manufacturer in time, and they will come to the door to remove the old doors and windows and install the new doors and windows.

3. The hardware is not tightly locked, and the quality of door and window hardware is also closely related to the sealing performance. In the process of opening and closing doors and windows, if you feel that it is not smooth enough and encounters great resistance, it means that the existing hardware may have problems such as rust and oxidation, and you can consider replacing the new door and window hardware.

Summary. Lack of tightness and inflexibility can be in the following ways:

The position of the aluminum alloy door and window hinge is not installed correctly, and the hinge installation will cause the door and window to be unable to open or close smoothly whether the hinge is installed high or low; The solution is to relocate the hinge.

The aluminum alloy door and window lock strip and the lock point installation position are not compatible, which is manifested in the incorrect installation of the lock point position (because the lock strip is installed on the fan in advance, and the lock point matches the lock strip); The solution is generally to readjust the position of the lock point to ensure that the lock bar does not touch the lock point when the fan is opened, and can just touch the center of the lock point when it is closed, so as to ensure that it is closed.

When the wind brace or hinge of the aluminum alloy window sash is installed, the wind brace or hinge is directly screwed to death without ensuring that the sash is vertical, so that the torque is generated during the reopening process of the entire sash is not vertical, which will lead to inflexibility and even stagnation. The solution is to readjust the verticality after removing the entire sash of the window, and install the upper and lower wind braces or hinges after ensuring that the entire vertical of the sash is ensured.

The last common point of loose closure occurs on the sealing strip between the window sash and the frame, some workers in the construction process or the window in the corner of the edge of the cut unevenly, or simply some places even have a section of the phenomenon of the strip, so that it will appear.

What should I do if the aluminum alloy screen window is not closed tightly.

Loose and inflexible closing may have the following aspects: the position of the aluminum alloy door and window hinge is not installed correctly, and the high or low installation of the hinge will cause the door and window to be unable to open or close smoothly; The solution is to relocate the hinge. The aluminum alloy door and window lock strip and the lock point installation position are not compatible, which is manifested in the incorrect installation of the lock point position of the cavity (because the lock strip is installed on the fan in advance, and the lock point is matched with the lock strip); The solution is generally to readjust the position of the lock point to ensure that the lock bar does not touch the lock point when the fan is opened, and can just touch the center of the lock point when it is closed, so as to ensure that it is closed.

When the wind brace or hinge of the aluminum alloy window sash is installed, the wind brace or hinge is directly screwed to death without ensuring that the sash is vertical, so that the torque generated in the process of reopening the entire rolling section window sash is not vertical, which will lead to inflexibility and even the phenomenon of stagnation of the sash. The solution is to readjust the verticality after removing the entire sash of the window, and install the upper and lower wind braces or hinges after ensuring that the entire vertical of the sash is ensured. The last common point of loose closure occurs on the sealing strip between the window sash and the frame, some workers in the construction process or the window in the corner of the edge of the cut unevenly, or simply some places even have a section of the phenomenon of the strip, so that it will appear.

Hello dear, your service has ended, do you have any questions? If it helps you, please use it in "...."Give a thumbs up at the end of the review!

Replace it with a felt strip with longer hair, or stick a baffle on the window sill inside the window frame.

If there is a gap in the vertical edge, you have to find someone to check whether the window frame is scooped. It's easy to squeeze the glass apart.

The place where the window is not opened is sealed with glass glue, such as the glass surrounding.

Affect the opening of the window with a sealing strip, the kind of cotton on one side and glue on the other.

The windows at home are not closed tightly, which is related to the installation or deformation of the outer frame and inner fan, and there will be the following reasons:

1: When the window frame is installed with problems or deformed window frames, it should be kept horizontal and vertical, when the horizontal and vertical degrees are deviated, the window frame will appear distorted, so that after the installation of the window frame, the inner sash will be difficult to close tightly.

After the installation of some window frames is completed, the window frames are moved or deformed due to improper operation by subsequent types of work, and the inner sash will not be closed tightly.

2: There is a problem with the inner fan, after the problem is not found in the outer frame, there is still a loose close, it must be a problem with the inner fan, and most of the inner fan is an installation problem and a problem with the village material itself.

One: the installation problem of the inner fanAccording to the subject's display of ** for the casement inner fan, the casement inner fan is installed, because the entire inner fan should be on the same plane, and there should not be a state of up and down, or up and down, these two situations, the inner fan is not tightly closed.

2: The inner fan is deformedThat is to say, if the surface material in the inner fan is deformed, it will cause the top and bottom not to be in a straight line, and the closure will not be tight.

Three: the lock point of the inner fan is not clampedWhen the lock point on the inner fan and the lock block on the outer frame can not be fully contacted, it is not stuck or not stuck, and the inner fan is not tightly closed.

If the window is not closed tightly, it can be solved by the following methods.

1: The outer frame problem can be used infrared to detect whether the outer frame is not horizontally perpendicular, if it is the problem of the outer frame installation that causes the window to be closed loosely, you can loosen the window frame fixing screws and readjust the horizontal and vertical degree of the window frame.

If you find that the window is not closed tightly due to the deformation of the outer frame, the best way is to replace the window frame. It should be noted here that it is best to replace the window frame with a profile of the same size and size, so that the inner sash will not be wasted.

2: Inner fan problem: If the inner fan is not on the same plane during installation, the window is not closed tightly, and the hinge of the inner fan can be adjusted to the point of closing until it is tight.

If the inner fan is deformed or damaged and the window is not closed tightly, the only way is to replace the inner fan, which also needs to be made of the same size.

If the inner sash lock point is not stuck or not securely stuck, it can be adjusted by adjusting the position of the lock block.

Summary: The window is not closed firmly, mainly due to some reasons for the outer frame or inner fan, I personally believe that as long as the outer frame and the inner fan are not deformed and damaged, the remaining reasons can be solved by adjusting the hardware accessories.

Call a repairman to make the repair. If the windows at home are not closed tightly, then it is convenient and quick to call a repairman to repair them in time.

Find the manufacturer to solve, the window is not closed tightly, this is a quality problem, find the merchant to let them carry out after-sales.

This phenomenon has occurred in my windows, and after looking at the maintenance master, I found that the window frame at home has been deformed, so I plan to replace it with a new one.

1. For the window made of plastic steel, if the window cannot be closed, first check whether there are obstacles in all parts of the window, and focus on checking whether the shaft of the window runs out.

2. For the window made of plastic steel, if the window cannot be closed, first check whether there are obstacles in all parts of the window, and focus on checking whether the shaft of the window runs out.

3. Because the window is exposed to the air for a long time, there will inevitably be some sand and ash layers in the place of the window sash and window frame, and these sand and ash layers will become obstacles to the light window.

4. Some iron windows due to long-term exposure to the air, there may be rust of iron sheets, after the rust of iron sheets, it is not easy for windows to be pushed and pulled, at this time, you can drip some lubricating oil on the rusty places of iron sheets, and then try to move it, if the window sash has been moved, it is best to wipe the organic oil on the window frame, otherwise, it is easy to contaminate the ash layer and appear to be blocked again.

5. If the iron sheet of the window is rusty and not easy to close, you can also sprinkle some pencil end on the place where the window is not easy to push, because the main component of pencil end is graphite, which has the effect of lubrication. Another advantage of using pencil ends is that they are less likely to get the ash on it. When choosing to use a pencil lead, it is best to use a type B pencil lead.

6. If the window suddenly cannot be closed, it is also necessary to check whether the lock point of the window is broken or not aligned, if it is due to the broken lock point, it needs to be repaired and replaced in time. If it is caused by the locking points not being aligned, it is easier to close the window after the locking points are aligned. Some windows are sliding windows with pulleys underneath each sash through the rails below.

If you push and pull the window too hard, it may cause the pulley under the window sash to derail, after the pulley derailment, the window will not close the phenomenon, the solution is: lift the window sash, and then the pulley stuck in the middle of the guide rail.

7. If the window is wooden, after a long time of wind and rain, the window cannot be closed, it may be that the wood of the window sash is deformed, you need to place an order for urgent maintenance, and ask the master to repair it.

Hello, 1The installation must meet the installation time, and the installation quality of each process must be checked and adjusted at any time to ensure that it meets the relevant deviation requirements of the installation. 2. Doors, windows and window holes need to draw the center line, when the window frame is loaded into the hole, the height must be high to ensure that the center line is aligned, the frame angle needs to be temporarily fixed, and the verticality and horizontality of the window frame need to be carefully adjusted The verticality, horizontality and straight angle of the window frame need to be carefully adjusted to ensure that every spring hole installation must be within the allowable deviation range.

3.Before entering the frame, we also need to check the diagonal and straightness deviations. After entering the frame, we need to check the width and clearance of the overlap with a steel ruler, etc., until the optimal requirements are met.

4. The hardware parts need to be installed correctly, and we need to replace them in time after finding the damage, so as to better ensure stable use. 5. Usually need to do door and window protection and maintenance work, to prevent some external force from some influence, remember not to hang heavy objects, otherwise it is easy to cause deformation, when using to gently open, maximize its role and extend the service life of doors and windows.