-
This is caused by the excessive stitch distance of the sewing workers in order to improve the work efficiency, which is manifested in the ...... of the filler sponge chips in the gang drilled out of the seamsHowever, it does not affect what we wear.
-
Hello. The shoe is not a layer, when the machine sews the sole and the upper, the part of the insole will be brought out with the machine stitches, which is the white foam-like thing you see.
-
If your shoes come out of the seam of the white foam-like object, it means that the quality of the shoes is not good, the single should belong to the fake or shoddy product, if there is an invoice, then go to the place of purchase to return, this is a typical inferior product.
-
Most of the time this situation is caused by sweaty feet, because some inorganic salts will be discharged from it, and there can be white powder along Ye Feng.
-
It should be sweat glands, especially cotton shoes in winter, if you have a problem with the quality or wear a pair of shoes all the time, this situation will occur if the shoes are very wet, you can wipe it with white vinegar to see, you can dispose of it.
-
If there is a white powdery thing in the gap between the inside of the shoe, this kind of thing is a kind of glue added to the shoe during the sewing process, which means that the glue has deteriorated and flowed out of the gap
-
This one is actually shoe glue, which has aged and deteriorated, which means that the glue used for shoes is unqualified.
-
This is very normal, in the process of shoe making, the stitches are filtered through flour, in order to prevent the thread from being too sharp and cutting the shoe steps, so it is processed like this.
-
It is because people walk a lot and sweat their feet after walking, because of the salt in the human body, there is salt in the sweat after sweating, so there are signs of white welding from the seams of the blood, which is normal.
-
It is a sponge-like thing that is put when making shoes, which increases the comfort of the shoes and will fall off after a long time.
-
It may also be a quality problem, socks shedding hair or the like, but it is the shoe that falls, and it may also be the ** debris on the foot.
-
These may be padding in the shoe. It's often foam or sponges or something like that.
-
The suture position may be the glue position, so the glue is overflowing.
-
It's padding in the sole!
-
It may also be that the glue used to stick the shoes has solidified.
-
This is the bottom material of the sole!
-
It shows that the quality of this shoe is not good, and the manufacturer has loaded bad things in it when it is manufactured.
-
No, it feels like it should be the padding inside, like down leaking from the seams of a down jacket.
-
It's the padding on the sole!
-
It may or may not be the material of the fabric of the shoe.
-
Basically, it's the characteristics of a counterfeit product. This is not the case with genuine shock-absorbing materials.
-
It may be that the material of the sole is like this, so it is not surprising.
-
Here's a guess you're gluing your shoes, it's bad behavior, and it's recommended to quit.
-
It should be sweat glands, especially cotton shoes in winter, if there is a problem with the quality or if you wear a pair of shoes all the time, the inside of the shoes is very wet.
You can wipe it with white vinegar and you can dispose of it.
-
Back to nitrification, sweat a lot or soaked in water, the second cortex is not very good.
-
I'm the same way, what to do.
-
Find a place that sells shoes, whether it is counterfeit or not.
-
AJ shoe threads will be rubbed with wax to increase lubrication friction when worn, so those white ones should be wax.
It doesn't matter, those white waxes will not affect the quality of the shoes, and they will fall off after wiping them.
-
Moths are coming!
Spray with an aerosol insecticide such as Pyrex and then seal the panel with tape, and the bugs can be killed quickly.
Finding the wormhole, injecting safflower oil with a needle, and then sealing the orifice can also achieve good results.
Act fast!
-
There is a tiny black worm in the crevice, the dust that falls when they bite the plank.
-
Milk, or white liquids such as shampoo, toothpaste, facial cleanser, milk powder, laundry detergent, juice, dyes, coconut water, cream, etc.
The white substance extruded from the pores indicates that the pores are clogged, how to improve the clogged pores: >>>More
That's a lot of oil secreted by the face! Adolescence is normal, usually eat more fruits, pay more attention to rest, and wash with facial cleanser.
The temperature setting is a bit high, and it is possible that the temperature control of the oven is not very good. >>>More
The smell of the stuff picked out by the flossing teeth indicates that the food that has been impacted between the teeth has spoiled, and that the good oral hygiene and brushing of the teeth are not maintained. Therefore, after eating food, you need to brush your teeth well, it is recommended to use the Pap brushing method recommended by the Chinese Stomatological Association, and brush your teeth after every meal every day plus before going to bed.
Nowadays, many young people are reluctant to return to their hometowns even if they do not mix well in the city, because they are not used to the life in the countryside after staying in the city for a long time, and they will not be able to do farm work after returning home. And there are no friends either.