What should I do if it rains heavily and water drips in from the window glass frame?

Glass sealants can be used to fill the gaps, which is the only way to solve this problem once and for all.

The window glass frame drips in and wipes it with a rag. If it doesn't work, take a towel and plug the gap, and wait for the rain to stop before repairing.

If possible, you can quickly dry the water, immediately use quick-drying glass glue to treat the connection between the inner glass and the frame, and wait for the rain to stop, and then make glass glue at the outer connection or ask professional door and window installers to maintain it.

There are several situations of water seepage on rainy days from the glass windows of high-rise buildings:

1. The adhesive strip of the window sash sealing glass shrinks and breaks.

2. The water outlet hole on the slide of the window frame is blocked, resulting in rainwater recharge.

3. When the window is installed, the gap between the wall is not well closed, there is a gap, and there is wind when it rains, resulting in the rainwater being blown into the gap by the wind and seeping into the inner side of the window.

Solution: 1. Replace high-quality rubber strips: The material of rubber strips directly affects its shrinkage and aging resistance. High-quality adhesive beads have very little shrinkage and are weather-resistant (no possibility of breakage).

2. Clean up the dirt on the inside of the slide and keep the water outlet unobstructed - to ensure that the rainwater flowing from the glass fan can flow away in time and not accumulate in rainy days.

3. Check the gap between the window side seal, up and down slide and the wall, and seal it with weather-resistant adhesive.

Precautions for indoor lightning protection on rainy days:

1. Pay attention to closing doors and windows to prevent lightning from hitting the room directly or preventing the invasion of side lightning and ball mines.

2. Do not stand under the electric light.

3. Try not to dial or answer mobile phones and landlines, or use ** lines to surf the Internet.

4. It is not suitable to use showers and solar water heaters, because the water pipe is connected to the lightning protection ground, and the lightning current can be conducted through the water flow and cause people.

5. Keep away from exposed metal objects such as water pipes and gas pipes outside the building.

6. Before the thunderstorm, disconnect the line and unplug the power plug, so as not to let the TV and computer lead lightning into the room, and damage the electrical appliances will cause fire accidents.

The window gaps are not tight.

There are a lot of old-fashioned windows that are not very tightly made and have more serious gaps as they are used.

First of all, the glass installation of the window sash should have been sealed with glass glue or sealant, but these glass glues or sealants will weather, fall off after a long time, and can not be patched in time after falling off, and some are not sealed at all, so that there will be gaps in the windows.

In addition, for the installation of window sashes and window frames, some old-fashioned windows are designed without sealing, and some sliding windows have large sliding grooves under them, which are easy to accumulate water and leak inside.

Connecting the above two, in some special weather, such as when the wind and rain are strong, there will be water entering the room.

That's the water that evaporates at room temperature.

If the window is sealed well enough, the window will not be flooded if it rains inside.

The inverted window can be rotated by rotating the handle of the window to drive the linkage hardware mechanism inside the window, and make the window in three different positions: locked (handle vertical down), casement (handle horizontal), and inverted (handle vertical upward).

Advantages of inverted windows:

1. It does not occupy indoor space when tilting, the curtains can be opened and closed freely, and the lifting hanger will not conflict with the window sash.

2. Children can play freely when they are inverted, and you can also clean the room with confidence, and you don't have to worry about hitting your head or body at the corner of the window.

3. Children who are greedy for fun will not be in danger of falling out of the window if they climb on the windowsill.

4. When pouring in, only close the window indoors before opening it to the casement state, so you don't have to worry about thieves entering the room through the window, you can open the upper hanging when you go out, and keep the indoor air fresh at all times.

5. The indoor ventilation is natural when pouring inward, and the wind blows in from the side of the window, not directly blowing the body, so that you feel more comfortable.

6. When there is a light breeze and light rain, the raindrops can only splash on the glass, not into the room.

In daily life, it is not uncommon for glass windows to enter the water. So the question is, what should I do if it rains heavily and water enters through the glass window? Let's find out.

When renovating the balcony, the drip eaves are damaged, as long as the drip eaves are added at the entrance of the hole, so that the water can be drained out smoothly. In addition, the drainage hole is blocked, so we just need to wait until the rainy season has passed to remove the stagnant water in the window frame and re-glue it. In addition, if there is a loosening between the window and the frame, resulting in water leakage, you can find a professional to reinforce it.

What are the common glass window materials.

1. Tempered glass.

It is made of ordinary flat glass through reprocessing, and compared with ordinary flat glass, it has two major advantages: the strength is twice that of ordinary glass, and the tensile strength is more than three times that of ordinary glass, and the impact resistance is more than five times that of ordinary glass. In addition, it is relatively difficult to break, and even if it is broken, it will be broken in the form of particles, which greatly reduces the harm to the human body.

2. Frosted glass.

It is made on the basis of ordinary glass by frosting, usually less than 9 centimeters thick, with a thickness of 5 centimeters or 6 centimeters.

3. Sandblasted glass.

The performance is almost the same as frosted glass, but the difference is that the frosted is replaced by sandblasting. Since they are visually identical, for this reason many property owners and even home improvement personnel confuse it.

4. Embossed glass.

The main characteristic of flat glass made by calendering method is that it is transparent and opaque, and is mostly used in decoration places such as toilets.

5. Insulating glass.

The two pieces of glass are usually separated by gluing, the interval is dry air, and the surrounding area is made of sealing material, which is usually suitable for decoration projects with sound insulation needs.

6. Bulletproof glass.

It is one of the laminated glass, which is only composed of multi-purpose high-strength tempered glass, and the number of laminated glass is large, and it is mostly used in banks, mansions and other places with high safety requirements.

Summary: After reading the above introduction, I believe you have a further understanding of what to do when water enters the glass window in heavy rain. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

Summer and autumn are the rainiest seasons of the year, and some owners will have water leakage problems in the windows of their homes on rainy days, causing a lot of inconvenience to themselves and their families. How do you waterproof windows? Let's take a look!

1. What should I do if the window leaks in heavy rain.

In this case, the original damaged sealing material should be taken out first, the base layer should be cleaned, and the gap between the wall and the window should be filled with styrofoam, and the inside and outside of the window should be filled with glue for sealing. However, if the water seepage of the window is more serious, it is necessary to do the waterproofing again, especially the waterproofing of the wall and the top surface.

Second, how to waterproof the window.

1. The waterproofing work of the window is mainly to waterproof the outside of the window, and then apply waterproof paint after scraping the water-resistant putty on the wall.

2. To make the window waterproof, the window sill base should be cleaned first, and the cement mortar base layer can be exposed after cleaning, and then the sealant under the window should be removed, and then re-glued for sealing. If cracks are found in the window sill during construction, the cracks in the window sill should be repaired with a leak plugging treasure, and the slope should be found outward, so that the rainwater can be easily discharged on rainy days.

3. After the plugging treasure is completely dry, you can apply waterproof coating, we need to use two waterproof materials in this process, one is the mortar primer material, and the other is a high-elastic acrylic material.

Summary: What to do if the window leaks in heavy rain is introduced here, the window waterproofing work must be done well, because the window is easy to leak rainwater, which will affect the indoor wall, and even affect the daily life of yourself and your family. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

Check the location of the drain hole in the window frame groove, if it is not directly facing the window sill, seal the original opening, and re-drill the hole.

Check the sealing of the outside and the window sill, if there is a gap, knock off and shovel off the original seal, and then buy weather-resistant glass glue for soft sealing, seal with cement mortar, and make waterproof tiles.

If it is a temporary glue to the inside to seal the role, after the rainy season to start re-gluing. If it is fixed under the glass, it is necessary to wait until the rainy season has passed, open the glass, remove the water in the window frame, and then re-apply the glue.

Let's find out the cause of the rain leak first. See if it's cracked. Or the rain leakage at the junction of the canopy and the wall,,Find the reason and then find a way to build。。。

If the glue is cracked, it must be reconstructed with weather-resistant structural adhesive. If there is a leak in the place where it meets the wall, brush it with waterproof paint...

Go up and scrape off the sealing glass glue between the glass, and then re-apply the new sealing glass glue to try!