The pen of the new emperor is suspended in the air and will be drawn without touching the screen.

There are many possibilities for this situation, such as unstable drive, unstable pressure sensor, etc., which can only be known by checking.

Solution: 1. Use other functions of the mobile phone to see if the stylus cannot be recognized.

2. Back up your phone's data (**thin, short message, multi**data, etc.), and try to restore your phone to factory settings (Settings - Reset Privacy Private - Factory Reset).

3. Send it to after-sales service and let the staff help check it.

Touch screen: touch screen, also known as "touch screen", "touch panel", is a kind of inductive liquid crystal display device that can receive input signals such as contacts, when touching the graphic buttons on the screen, the haptic feedback system on the screen can drive various connection devices according to the pre-programmed program, which can be used to replace the mechanical button panel, and create vivid audio and video effects through the liquid crystal display screen. As the latest computer input device, touch screen is currently the simplest, most convenient and natural way of human-computer interaction.

It gives a new look to the multi-first, and is a very attractive new multi-interactive device. It is mainly used in public information inquiry, leadership office, industrial control, military command, video games, song and food, multi-class teaching, real estate pre-sale, etc.

Hello, do you use this situation when you use the tablet alone or when you connect it to the computer?

Pressure-sensitive pens have a reading height, at a certain height, without touching the screen, the pen can move the control cursor. If you want to draw, you must touch a pen tablet or pen display. If this happens to you after connecting to your computer, it is recommended that you reinstall the driver of the product.

In addition, you can pull out the refill of the pen and gently shake off the pen to try.

If the pen is able to draw lines without touching the board, then there is something wrong with your pen! Go to the after-sales service to repair!

If you don't touch the board, you can control the cursor, but you won't be able to draw lines, which is normal!

It's too sensitive, or you hold the pen and touch the top key, this is normal, you adjust the sensitivity. There is no pressure to draw the lines, how to say, the pencil and some brushstrokes are not obvious. You can go to the wacom settings page, select the "pen" item, there is a "current pressure" test item below, take the pen and point the board, you can see that the progress bar has a reaction with the advance and retreat In this way, the pressure of your board is no problem Find problems in other aspects.

This happened to me just now.,It's strange that sai won't.,ps suddenly like this.,It won't be like this after wiping the board with your hand.,

If you want to learn systematically, you can consider signing up for a live online class, and recommend CGWANG's online class. The teacher speaks carefully, you can watch it back after the class, and there are also the same type of recorded classes that you can learn for free (give away lifelong VIP).

Me too! I'm confused!

You open the Wacom pen tablet properties, find the professional pen, click on the correction, there is a monitor in it, you select it, then click Calibrate, and then calibrate it according to the steps, I also often encounter this problem.

Open the tablet settings, and then change the mouse function of the keys on the pen according to your requirements.

1.Using the SAI software, BAI adjusts the jitter DU correction in the upper right corner.

2.Using ZhiPhotoshop, Window Brush Shape Dynamic, DAO Modify the size of the pressure jitter and angle jitter. Genus.

3.If the tablet is too slippery, you can put a layer of tissue paper underneath it that won't affect the effect.

4.Check the driver of the pen tablet to see if there are any setting errors, and experiment in the driver software.

5.If none of the above methods can solve the problem, try to see if there are other refills in the accessory and try another one. If not, you can contact customer service on the manual.

...I'm even more tragic, not only is the computer not responding, but the board is not responding either.

But it's normal to use it on a different computer

I'm in the same situation as you, I'll draw lines when I'm in the air, I'll drive reloading, it's useless to change the refill, I'm ready to fix the pen, sad.

There is a problem with the hardware of your board, hurry up and contact customer service to send it for repair.

If there is a problem with the driver, uninstall the driver and reinstall it.

If it doesn't work, reinstall the system and then install the driver, which is generally good.

If reinstalling the system is not enough, it is necessary to consider whether it is a problem with the board or pen.

Pull out the nib and replace it with a new one, sometimes the nib will be used for too long.

The above methods have been tried, and they are not working, so they are directly sent for after-sales maintenance.

Generally speaking, the situation you mentioned is likely to be caused by using a pressure-sensitive pen to draw too hard, so that the tip of the pen is poked inside, and changing the refill can basically solve the problem.

However, since you unplug the pen head, there will still be the situation you said, indicating that it should not be a problem with the pen, then it is very likely that there is a problem with the hardware of the pen tablet itself, and it is recommended that you send it for repair as soon as possible, I hope the problem is not very big. Good luck.

Pen problem, you try to change the nib.

I'm using the board of the painter.,I've also encountered the situation of the pen hanging in the air to draw lines.,I changed a refill on it.,I guess it's dirty when I paint.,You try to change the refill.。

I'm using Huion's.,It's a pen tablet with your WAC.,The principle should be similar.,I hope it helps you.。

I'm having the same problem, the software has been reinstalled many times and it doesn't work.

I changed the refill and used it. Spare refills are usually placed in the pen holder.

I don't know why, it's weird.

I know you're feeling a little off. It should be possible to set these things in the corresponding driver. I feel like I don't need to care about these things when drawing. After all. Drawing will not go to Bi Wei to see the digital Qin Hui cracked board...

Pls is it solved, mine is the same now.

You try to adjust the resolution, and there will usually be a little difference, but it won't be noticeable.

Is there a more systematic training method for equipment segmentation to improve equipment segmentation?

The memo in your phone can be drawn.