Cans do very good looking handwork, cans how to do handmade

In our daily life, cans are used for many purposes in addition to being reprocessed with a can grinder, among which making handicrafts is a very popular phenomenon, sometimes cans are garbage, but sometimes it is an indispensable tool for achieving works of art!

Materials: 3 cans, 2 pairs of eco-friendly chopsticks, red-headed rope, self-painted sailing sails, double-sided adhesive tape, rubber strips.

The steps of making a small handmade can:

1. Fix the three cans with double-sided adhesive tape;

2. Both sides are fixed with chopsticks and rubber strips;

3. Drill a small hole in the middle of the can and insert a chopstick;

4. Make a colored sail, remember to open a small hole in the upper and lower ones, and put it on the sail bar later;

5. Fix the sail pole with a red head rope and put on the colored sail.

The can craft is finished!

Cans are most suitable for piggy banks, ashtrays, etc., and there are also vases, but I personally think that metal containers are not breathable, and the shape is too small, which is not good for the health of real flowers and plants. If it is a fake flower, the jar is too light, and the fake flower is heavier and easy to pot. If you make a piggy bank, the iron sheet is too thin, and it is easy to scratch your hands when you take it, and the practicality is slightly lower.

Therefore, the ashtray is the best, you can throw it away when you use it, and the cost is lower than really buying a finished ashtray, which is equivalent to 10 cans to 1 finished ashtray, or a basic ashtray, and the exquisite workmanship will be more expensive. And the ashtray is generally placed in a conspicuous position on the coffee table, if you make it yourself, it is particularly ingenious, and the rough man immediately has a halo around the charm bonus.

Here's how to make a can by hand:1. First of all, use a small branch knife to cut off the upper end of the can.

2. Then use scissors to cut the side of the can vertically into long strips, not to the top.

3. Then fold the strip down by hand.

4. Roll each strip up and lay it flat so that it surrounds the can. Stool clearing.

5. Finally, fix the thread to both sides of the can.

6. A simple hand-canned can be done.

Benefits of doing handicrafts:Craft activities are a way for us to explore and learn, activities that promote brain development, and the more we do it, the more we can learn.

Handicraft can bring fine motor exercise to children, that is, hands-on thinking awareness and unified coordination of muscles. The progress process from rough manual to fine manual can gradually improve children's hands-on ability, and children can control their movements more accurately by making jujube peel before handicraft.

Not only the role of physiology, manual activities are more important for people's comprehensive ability and mental health. Craft activities can develop children's observational skills, creativity and imagination. In the process of handicraft, children will gradually develop the habit of carefully observing the things around them, and grasp the characteristics of things more and more accurately.

Children's handicraft activities from imitation to creation are the process of continuous improvement of creativity.

The nose of a model airplane is made out of cans.

1. Use scissors or a knife to cut open the can and cut off the entire top completely;

2. Wrap the prepared waste paper with twill to wrap the can.

3. Use the twill on the waste paper to cut the bottle into more than a dozen thin strips from the opening of the bottle.

4. Press the thin strip cut from the can's bottle body parallel to the top of the can, and the thin strip becomes divergent, and bend the end of the thin strip into an arc;

5. Use a tool to make a small hole in the middle of the bottom of the can;

6. Cut out a piece of disc on the hard cardboard that can just be placed at the bottom of the bottle, punch a hole in the middle 7, fix the cardboard disc to the bottom of the can with glue or double-sided tape, and the empty hole is just aligned with the small hole of the can.

Handmade crafts made from cans include: canned lanterns, canned flower pots and canned other crafts.

Tools Materials:

A number of cans, scissors watering and other hand tools, wire, paper and other auxiliary tools.

Operation method: Can lantern: cut the bottom of a can, then wrap the two parts with colored paper, cut the bottle body into one by one, and finally use a rope to fix the bottom and bottle body of the cut bottle.

Please click Enter a description.

2.For cans and flower pots, take a beautiful can, or put a nice sticker, draw the part to be cut off on the bottle with a marker, and finally use a rope to pass through the bottle.

3.Other crafts of cans, this is relatively more complicated, you need to prepare the design drawings in advance, understand the composition of each part and the selection of materials, and then practice.

Cans make vases.

Spray different colors of lacquer on it, then paint flowers, and decorate it with lace, is it also a unique flavor? Flower pots made from cans are actually beautiful, not inferior to those made of ceramic! Just cut the jar along the mouth of the jar and spray it with your favorite color.

Isn't it also artistic to look at the deformed can?

Cans**Aluminum:

The elements contained in the can body, lid and pull ring of the can are different, such as the can body contains less than 1% magnesium and less copper and manganese, the can cover contains more than 2% magnesium, and the copper and manganese content is more than 1%, as for the pull ring, although the proportion in the can is very small, but the amount of manganese and copper is also more than 1%.

At present, only the method of full remelting can be used to obtain the remelted aluminum ingot containing more alloy components, the composition of the remelted aluminum ingot is generally: magnesium 1 2%, copper, manganese or so, the balance can be aluminum, but it is polluted by other impurity elements in the smelting and has changed, such as the amount and composition of the refining agent.

The handmade cans are as follows:Materials: cans, scissors, adhesive tape.

1. First cut off the top of the can.

2. Fold it in half to cut it, divide it into three and two equal parts, fold it in half to cut it open, and fold it in half again to cut it into small strips.

3. Press the cut strip outward.

4. Cut a long strip on the lid of the cut off can and segment it.

5. Fix every four strips together, fix the adjacent outer strips with transparent tape, or roll them up with tweezers.

6. Finally, glue the adjacent strips together, and glue a similar color at the bottom to complete.

The mouth can be ground off to make a pen holder, and the upper tab can be used to hook flowers.