If you find that the floor is soaked in water, what are the best ways to deal with it?

The total area of the wooden floor soaked is relatively large, you must use a dry mop, drag it in all directions, wipe it with a dry cotton towel, and then use the air conditioner of the hair dryer to slowly dry the wooden floor, do not use the warm air block, otherwise the surface of the wooden floor will be cracked and deformed after drying. If there is a large-scale soaking of water, then you should immediately notify the floor after-sales service, and under the condition of maintaining the floor is not deformed, the floor should be warped carefully, stacked in a cool place according to the shape of "well", so that it can be dried of course, and it can not be exposed to the sun, otherwise you may get a bunch of deformed floors.

<> high-quality floor bottom layer with high density, close laying, good moisture resistance, short-term soaking is smooth, and the surface can be wiped. The water situation is not too serious, and it is best not to disassemble it. Poor flooring will swell and bulge at the interface, and even overall deformation, which can only be dismantled and discarded, and then purchased and laid again after the road surface is dried.

After the composite floor is soaked in water, the water traces on the surface of the floor are dried first, and then the air conditioner can be turned on to carry out dehumidification, or use a hair dryer and electric fan to dry the floor interface. Just take care of it.

After finding that the floor is soaked in water, prevent the wooden floor from further soaking in water as soon as possible. If the water pipe is leaking, you need to turn off the gate valve; If it is because the living balcony is not waterproofed, it is necessary to open the pavement of the living balcony and pump it out to store water. The key to this step is to reduce the leakage of water resources.

There is no long-term soaking in water because the problem is not big, there is a paint layer on the surface, and it is not easy to seep water for a while, but the laser-cut floor may be finished, if the water is eaten in, it may not be able to deal with it, because the wooden floor has been dried and treated, you drink water, but how long will it be deformed! Laser cutting is not much, you can buy a few yuan to make up for it.

Because of the large temperature difference between day and night in spring and summer, it is necessary to pay attention to the problems of waterproofing and slipping off the moisture in the raw materials in the laying of floors and floor tiles. When choosing a floor, you should pay attention to the moisture content of the board, especially the solid wood floor, if the moisture content is high, the floor will warp and deform after the water loss.

Sports wood flooring is soaked and swollen by water: sports wood flooring is water-abore, and the sports wood floor after being soaked in water is easy to swell and deform, which directly affects the use of sports wood flooring. Generally, when encountering this kind of problem, do not remove the wooden floor without permission, and contact a professional wooden floor installer to repair and deal with it according to the soaking situation.

If we find that the floor is soaked in water, in the case of stagnant water soaking, we must carefully raise the ground when dealing with this simple problem, stack it in the shape of a "well", put it in a ventilated place, dry it in a cool place, and use the weight generated by the stacking to avoid deformation. Generally speaking, for the *** solid Madeira Piso, we can contact the after-sales department of the floor identification, ask the professional AOS to open the floor carefully, and stack and place it in the opposite direction according to the CIMA "good" phase Li in front of and in the opposite direction, so as to facilitate ventilation and drying, and avoid extrusion deformation.

<> some flooring needs to be replaced. Solid Madeira flooring has a large area of water. If water is found on a solid Madeira floor in a short period of time, a high-power vacuum can be used to absorb water vapor.

However, if the floor is flooded with a large area of scrambled keys, it is possible to peek around all floors and dry in the shade. What I saw on the Bell Forum, as time went on, the ground appeared and moldy. Too late.

Forgetting to turn off the faucet, etc., can get our Madeira floor wet. In particular, many of the joyful, joyful things that are busy outside, our floors will be affected.

Leakage, neglect of the sample, and easy to cause hard damage to the laminated PISO, which can lead to serious consequences that cannot be returned to use. It is best to quickly remove the strip from the ground, expose the expansion joints, and disperse the water vapor through the expansion joints. Depending on the amount of seepage, it usually takes three to ten days to dry.

While the tread of Madeira Piso is very comfortable, it can easily darken in humid environments and rot badly in humid environments (more houses have been found to be uninhabited to this extent). Although Madeira itself contains a certain amount of water, contact with water can create a damp and slightly decaying environment. What should I do if my floor is soaked with water?

Normally, first clean the water from the floor, keep the surface dry, and then take appropriate measures according to the degree of immersion. The specific solutions are as follows. Let's take a look first!

The installation of the furniture was explained by Master Luban from the house.

The area of the wooden floor soaked in water is relatively large, you need to use a dry mop, mop it all, wipe it with a dry towel, and then use the cold air gear of the hair dryer to gently dry the wooden floor, do not use the hot air stall, otherwise the surface of the wooden floor will be heated and will dry and deform after drying. If a large area of water soaking occurs, then you should notify the floor after-sales service in time, and on the premise of keeping the floor not deformed, the floor should be carefully warped, stacked in a ventilated place according to the "well" shape, so that it can be naturally shaded, and must not be exposed to the sun, otherwise you will harvest a bunch of deformed floors.

The high-quality floor base is dense, tightly paved, waterproof, and soaked for a short time without hindrance, and the surface can be wiped dry. The water situation is not too serious, and it is best not to disassemble it. Poor flooring will swell and bulge at the joints, and even deform as a whole, so you can only dismantle and throw it away, and re-purchase the pavement after the ground is dry.

After the laminate floor is soaked in water, the water stains on the surface of the floor are dried first, and then the air conditioner can be turned on for dehumidification, or the joints of the floor can be dried with a hair dryer or electric fan. As long as it is dealt with in a timely manner.

If you find that the floor is soaked in water, avoid further water soaking on the wooden floor as soon as possible. If there is a leak in the water pipe, close the valve; If it is due to the fact that the balcony is not waterproofed, the balcony floor should be opened to pump out the stagnant water. The important thing at this step is to reduce the amount of water that leaks.

Not soaked in water for a long time because the problem is not big, there is a paint layer on the surface, and it is not easy to enter the water for a while, but the cut floor is estimated to be finished, if the water is eaten, it is estimated that there is no way to solve it, because the wooden floor has been dried, you have a draft, but how long will it be deformed! There is not much cutting, you can buy a few pieces to make up.

Due to the large temperature difference between day and night in spring and summer, attention should be paid to moisture-proof and moisture removal in the material in the paving of floors and floor tiles. When choosing the floor, we should pay attention to the moisture content of the wood board, especially the solid wood floor, if the moisture content is high, the floor water will be warped and deformed after the water is lost.

Immediately carry out clean-up measures, wipe off all the water with a cloth, then turn on the exhaust system and dry the floor.

On the premise of keeping the floor from deforming, carefully tilt the floor and stack it in a well-shaped place in a ventilated place so that it can dry naturally in a cool place. Do not expose to the sun, or you will harvest a bunch of deformed floors.

First of all, look at the strength of the floor soaking, if it is particularly powerful, you need to remove it and replace it, if it is just a general degree, find a more absorbent rag, absorb the water on the floor, and then blow it with a hair dryer.

The water should be drained immediately to prevent the floor from becoming more soaked and damaged.

<>1. If the soaking area is small or on the edge, then you can use a dry rag to stick it to the drum of the floor.

2. Then use a hair dryer to blow a towel to absorb the moisture in the board, but you need to use cold air when blowing.

3. Hot air will cause the surface of the wooden floor to be seriously heated, and it will be too dry to cause deformation and cracking. Yuanwang Bridge.

4. If the wooden floor is too serious and bulging, it is generally impossible to solve it by yourself, and you can ask a professional to deal with it.

5. At this time, it is necessary to take emergency measures first and adopt the method of drying in the shade, so that it will not be deformed.

If you are only soaking in water in a small area, it is best to quickly remove the baseboard of the ground to expose the deformation joints and let the water vapor dissipate. According to the different amount of seepage, it generally takes about 3-10 days to achieve the actual effect of dryness. In addition, after the wooden floor is soaked, it is necessary to suck the water on the floor in the shortest possible time, and use a vacuum cleaner to pump away the water vapor in the patchwork gap of the ground.

You can also use a hair dryer to blow the heel, but be sure to use air conditioning instead of warm air, if you use warm air, the surface of the wooden floor is very easy to crack and deform due to heat and dryness. If there is a large-scale soaking of water, then the after-sales service of the wood floor should be notified immediately.

Please keep the wooden floor from deforming, please warp the wooden floor carefully, fold it in the shape of a "well" and let it dry naturally, and never expose it to the sun, otherwise you may get a bunch of deformed wooden floors. If you have just sprinkled water on the wooden floor and the soaking area is not large, wipe it off quickly with an absorbent towel and wait for the water to dry. The range of soaking of the wooden floor is relatively large, you need to use a dry mop, drag it in all directions, wipe it with a dry towel, and then use the air conditioning gear of the hair dryer to slowly dry the wooden floor, do not use the warm air block, otherwise the surface of the wooden floor will be cracked and deformed after drying.

The wooden floor has been soaked for half a day, and there is already a leakage problem.

Use the pressing technique to wipe the floor neatly, and then remove the baseboard (the technique should be slow motion and light), the purpose of this is to make the ground have a retractable indoor space, and the water inside can be evaporated and tidy stronger, and it will be fine after half a month. If the wood floor is soaked into tiles, some respond to the leveling situation must take a long time, and some wood is likely to not be repaired to the original leveling situation, (which is also based on the quality of the wood, and the wood texture is related). There is a kind of "disc bean" of wood in Africa, which can be restored to its original leveling condition even if it is soaked into a tile shape, because its wood texture is cross-skeined.

I have been dealing with this wood for eight years, and I have also experienced the whole process of soaking in water on this kind of wooden floor. After soaking in water, the solid wood board is easy to regain moisture and crack. If you find that the floor in your home is flooded, the first time is to wipe the floor dry, and then you will do your best to disassemble the soaked area, turn it over and stretch it out, blow it dry with a hair dryer, and then put it in to dry.

The pure solid wood floor installed at home is more seriously soaked in water, and it should be immediately removed and wiped with a cotton towel and ground water, placed in the shade and natural ventilation, and can not be exposed to the sun.

1.Soak in small amounts: Vacuum the water on the floor or blow it down with a hair dryer, but not hot air.

2.Local soaking: clean the water on the surface of the floor, remove the baseboard and the lower pressure strip of the door, and use the method of opening the window for ventilation to dissipate the moisture on the surface of the floor.

3.Extensive soaking: Replace the flooring again.

If the floor is soaked in water, be sure to dry the water with a dry cloth or find an after-sales service for treatment, which is the fastest way.

If the wooden floor is soaked in water, it is likely to cause the wooden floor to deform and crack, so you should try to ventilate and dry it as much as possible to let the floor dry quickly.