How to renovate the floor, how to renovate the old one

The steps for refurbishment are as follows:1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

2. Polishe off the original surface of the floor by 1-2 mm.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

As far as the types of flooring on the market are concerned, laminate flooring cannot be renovated, while multi-layer solid wood flooring has different surface thicknesses, and the thickness of the thin skin is generally about millimeters.

Here's how to renovate an old floor:

1. First of all, use a large renovation machine to polish off the surface paint layer of the wooden floor, in the corners, the machine may not be able to polish it, it is recommended to use a small angle grinding material to polish, polish the paint layer on the surface of the floor and then sand, so that the surface of the floor is more smooth and delicate.

2. After sanding the floor, you can check the corners around the floor, especially the gaps, to see if there is any transparent filling, if there is a need to clean up and then refill the joints, and then you can brush the floor with primer.

3. After the first primer on the floor is dried, start to polish the surface of the floor with sandpaper, grind it to the surface of the ground is rough, clean up the dust from the polishing, and polish the floor to 3 to 4 times according to this step until it is smooth and flat, and there are no flaws.

4. After the floor is polished, you can brush the topcoat of the special floor, wait until the topcoat is completely air-dried and then apply floor wax, and then use it after air-drying.

Tips for maintaining your wooden floors

1. Keep it clean, pay attention to keep the floor clean and clean when flattening the mold, and clean the ground in time if there are dust or stains, so as not to accumulate for a long time and increase the difficulty of cleaning the ground.

2. Pay attention to humidification, the surface of the wooden floor should also maintain a certain humidity, especially in the dry autumn, you can put a basin of water in the corner of the wall, and if the conditions are good, buy a humidifier to humidify the effect is better, so as to avoid the wood floor from cracking and deformation due to drying.

3. Regular maintenance and waxing, some wooden floors are not cheap, in order to maintain the brilliance of the surface, wax maintenance should be carried out every once in a while to enhance its service life. Usually, you can buy your own maintenance liquid for maintenance, of course, if necessary, you can ask a professional company to deal with it, the effect is better.

The steps to renovate an old floor are as follows:

1. Floor polishing.

The first step in floor renovation is to remove the paint layer from the old floor, this procedure is a process that requires large floor renovation machinery, which generates a lot of dust during the removal process. If the floor is renovated on site, protective measures should be taken. Use 40 mesh, 80 mesh, and 120 mesh sandpaper to polish the floor three times in a row to ensure that the polished surface is smooth and delicate.

The larger the amount of sandpaper, the smaller the particles, and the less obvious the scratches left after throwing the pants.

2. Scrape putty.

After the floor is polished, the surface is smooth, but not necessarily flat. At this time, it is necessary to scrape and apply putty, through this method to make the floor smooth, you can also use a special transparent primer putty matched with the floor paint, layer after layer of putty, after applying evenly, you must wait for drying before proceeding to the next step.

3. Primer tinting.

After the putty is scraped, the floor needs to be primed or painted. After sanding and scraping putty, the color of the floor will be different, but due to the natural texture of the solid wood surface, the color cannot be changed, just adjust the depth of the floor color to make the color consistent.

4. Paint on top.

After the primer is toned, especially after drying, it is necessary to apply another layer of paint to the primer, and after the first layer is dry, sandpaper is sanded to make it dry and bent in the base. The surface of the floor is a bit rough. Blow off the powder from the surface and brush with a second coat of paint.

5. Polishing and waxing.

After all of the above is done, the final step is polishing and waxing. It is recommended to use a special floor wax and apply it carefully to the floor to ensure that it does not fall into every corner. You should also pay attention to the maintenance of the floor every day, to avoid damage to the floor caused by sharp objects, we must pay attention to the cleanliness of the ground in our daily life, and also pay attention to maintenance.

<>1. Scrape off the surface of the old floor by 2 to 3 mm, generally polish 3 times, in this process, you need to use professional renovation tools to take protective measures, because a large amount of dust will be generated when grinding.

2. It is necessary to brush putty on the polished old disturbed spine floor, which should be evenly brushed and dried naturally.

3. The old floor after brushing putty to dry naturally may have different shades of color, and a layer of primer is required to maintain the consistency of the color of the floor.

4. After brushing the primer, the next step is the topcoat, the topcoat is generally brushed with two layers, the first layer needs to be sanded with sandpaper after brushing, and the dust on the surface is treated and then brushed with two layers.

5. After the topcoat dries naturally, polishing with special floor wax can make the surface of the floor shiny.

Floor: Flooring, which is the surface layer of the ground or floor of a house. It is a type of building material.

Made of wood or other materials. There are many classifications of flooring, including solid wood flooring, laminate flooring, parquet flooring, bamboo flooring, cork flooring and the most popular multi-layer parquet flooring according to structure; According to the use, there are household, commercial, anti-static flooring, outdoor flooring, special flooring for stage dance, special flooring in sports halls, special flooring for track and field, etc.; According to the environmental protection level, there are E0 level flooring, JAS star standard F4 star flooring and so on.

Treatment methods for floor renovation: sanding, scraping putty, brushing primer, brushing topcoat.

1. Grinding: The first step of floor renovation is polishing, before construction, clean up the site, and then you can start polishing, use the floor renovation machine to repeatedly polish the old floor until the paint layer on the surface of the floor is reduced by one to two millimeters, and then further polish the surface with sandpaper of different specifications, usually, this process must be repeated three times, because the more repetitions, the less likely the floor will leave traces, so as to ensure the flatness and smoothness of the floor.

2. Scrape putty: After polishing, it's time to apply putty, first of all, the ground should be flat, and the polished floor should be coated with the matching putty of floor paint, when it is naturally dry, the putty in the cracks in the floor should be scraped off, and the edge should be sealed again. Pilu.

3. Brush the primer: When the putty is completely dry, you can start to paint the floor primer, it should be noted that if it is a solid wood floor, its wood grain is clear, then the primer can not change the color, only adjust the color depth.

4. Brush the top paint: wait for the floor primer to dry, and then apply the paint, from the perspective of environmental protection and health, water paint is a better choice, not only there is no pungent smell, but also the decoration can be completed faster, so that the renovation of the floor is basically completed, and then the maintenance work such as waxing is also done very well, and the floor is as new as when I first bought it.

Precautions for floor renovation

1. In the process of renovation, we may use paint, so try to choose a special paint with good environmental protection, but we must know how many times we paint it, if there are still some flaws in the appearance of the sanded floor, then brush the primer several times according to the actual situation.

2. Before the renovation begins, we need to know what material the floor is used at home, and it should be noted that not all the materials of the earth can be renovated, in fact, only solid wood, solid wood composite and bamboo can be renovated, and all the furniture in the house must be removed, so as to avoid the furniture being stained with dust, and the operation is also particularly square to hold and tremble.