What should I do if the solid wood floor is soaked in water?

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

If the floor of your home is blistered, the first thing to look at is the extent of its damage.

If the floor is less soaked in water in a short period of time, first wipe the moisture on the surface of the floor with a dry rag; Then, use a high-powered vacuum cleaner to absorb the moisture to prevent the floor from becoming moldy and deformed due to moisture. If you don't have a vacuum cleaner, you can use the cold air setting of a hair dryer to dry, remember not to use hot air, which can easily cause the floor to crack. At the same time, a dehumidifier can also be placed in the home to help quickly dissipate moisture and reduce the humidity of the space.

If the floor is flooded with water, the first step is to dry the surface of the floor, and then pry up the soaked part to air dry. Because the disassembly and air-drying of solid wood flooring involves more professional operation procedures, it is recommended that users contact after-sales service personnel in time, arrange door-to-door inspection, and carry out disassembly and air-drying according to the specific situation to minimize the loss of the floor.

Natural flooring can provide users with a number of professional and thoughtful services. If the floor at home is soaked in water and you want to consult a solution, you can contact the local natural flooring store.

Summary. If the water accumulation is small, you can use a dry cloth to dry the moisture on the ground and use electricity.

Blow the air to dry the moisture in the crevices of the floor. Finally, press the ground with a heavy object.

Soak the plate in water and let it return to normal; If the floor is soaked in water severely, only.

Pry the floor up, leave it in a ventilated place to dry, and then re-lay it.

Establish; However, if the floor has been soaked in water and deformed, the floor can only be partially replaced.

What should I do if the solid wood floor is soaked in water? What to do if there is water under the wooden floor and there is a peculiar smell.

Hello, happy to answer your <>

If the water accumulation is small, you can use a dry cloth to dry the moisture on the floor and use a hair dryer to dry the moisture in the crevices of the floor. Finally, press the soaked place of the floor with a heavy object to let it regain its crack and return to normal; If the floor is soaked in water, the floor can only be pried up, put it in a ventilated place to dry, and then re-lay; However, if the floor has been soaked in water and deformed, the floor can only be partially replaced.

If you can't do it, you can only replace it.

If there is a peculiar smell, you can pry up the floor to ventilate and dry.

What are the precautions for the maintenance of wooden floors:

1. First of all, the core of the wooden floor is not small to find some egg stains, you can sprinkle some refined salt on the egg stains, let it stand for a few minutes, and then use a cloth to wipe off the egg stains. In addition, expired cows can also be used to maintain the wooden floor, which can not only remove the dirt on the floor, but also make the wooden floor more bright.

2. Secondly, if there are a large number of stains on the wooden floor, you can use a cloth dipped in detergent or rice water to wipe the stains to remove the stains, and the effect of socks talking about rubber salad oil maintenance of the wooden floor is also good.

3. Finally, every time you mop the floor, first use a broom to sweep the dust on the cracked ground, and then use a wring out rag or mop to wipe it. If you encounter a stain on the wooden floor, wipe it off with a cloth dipped in detergent and then use a mop to clean the floor.

Hope it helps.

Cerebellar axe].

If the floor is wet, remove the furniture and drain the moisture from the surface of the floor. If necessary, you need to remove the baseboard in the corner of the wall, leak the expansion joints of the floor, let the moisture in the floor dissipate faster, and try not to pry the floor to dry.

Hardwood flooring is made from naturally grown wood and is often used in living rooms and bedrooms. In daily use, solid wood floors will inevitably be soaked in water, so what to do if the solid wood floor is soaked in water, I will teach you three treatment methods to help you solve this kind of trouble.

1. Water ingress in a small area.

1.Wipe the moisture off the surface of the floor with a dry cloth, and then choose a practical vacuum cleaner to absorb the moisture in the splicing gaps of the soaked floor, or use the cold air setting of the hair dryer to dry it.

2.Use some heavy objects to press on the small warped area, and after a while, the wooden floor will return to normal on its own.

3.If, after a period of time, the joints have to bulge, but they are too far from the original shape of the previous floor, you can try waxing the floor, and the soaked floor after waxing will basically be almost the same as the original.

4.If the color and shape of the floor are still very different from the original state after waxing, then only partial replacement of the floor.

Second, the water ingress is serious.

The floor should be carefully pried up, stacked in a ventilated place according to the "well" shape to dry, and the weight generated by its stacking to prevent deformation can be used again.

3. Water ingress into the laminate floor.

1.Whether it is a large area of water or a small area of water, it is not recommended to pry up the laminate floor to dry, which is easy to cause damage to the laminate flooring, and is likely to cause serious consequences that cannot be used again.

2.It is best to drain the surface water of the floor quickly, and then remove the baseboard of the floor to expose the expansion joints, which allow the water vapor to be dissipated, but depending on the amount of water intake, it usually takes about seven to fifteen days to dry.

3.For products with good quality or not soaked in water for a long time, they can be restored on their own, and if they still cannot be recovered after 15 days, they should be considered to be replaced.

Therefore, consumers should know what material they buy when buying wood flooring, so that they can do effective treatment when there is water ingress.

Hardwood flooring is a high-grade flooring material that is highly regarded in home decoration. However, if the solid wood floor is accidentally soaked in water, it will cause great damage to the floor, and even lead to deformation and mildew of the floor. So, if the hardwood floor is soaked in water, what should we do about it?

1.Remove moisture as soon as possible. When solid wood floors are soaked in water, we should remove the moisture as soon as possible. You can use absorbent water to absorb the water, or you can use a dry towel to gently wipe along the texture of the floor to make the surface as dry as possible to reduce the amount of time the floor is soaked with water.

2.Dried. While removing moisture, you can open windows or use auxiliary tools such as electric fans to allow air to circulate as soon as possible and allow the surface of the floor to air dry.

3.Dismantle the floor. If the floor has been soaked in a lot of water, or has been soaked in water for a long time, and cannot be solved by simple methods such as air drying, please consider disassembling the floor for treatment. This process is tedious and requires a certain amount of skill and experience.

4.Do dehumidification treatment. When dealing with moisture, we can use auxiliary tools such as moisture absorbers for dehumidification, which can help reduce the dampness of solid wood floors, and can also prevent situations such as deformation or discoloration of the floor.

5.Maintenance. In order to avoid the solid wood floor from soaking in water or being exposed to a humid atmosphere, it is also important for us to choose the maintenance and maintenance of the solid wood floor.

The cleaning and maintenance of the floor surface needs to be done well, such as using some special floor cleaning and maintenance agents, which can effectively create a good living environment for the solid wood floor.

The above is the treatment method of soaking in water on solid wood floors, I hope it will help you. In the usual decoration and daily use, we should pay more attention to the maintenance and maintenance of solid wood flooring to create a comfortable, warm and lasting environment for it.

The remedy for soaking wooden floors in water and grinding lead: remove the furniture and dry it, treat it with a vacuum cleaner or hair dryer, and dehumidify it with an air conditioner.

1. Remove the furniture and wipe it dry.

First of all, the furniture and items placed on the soaked floor should be removed, and then the surface water on the wooden floor should be blotted dry with a dry towel or mop in the shortest possible time, and be careful not to step on the soaked water during the treatment.

2. Handle with a vacuum cleaner or hair dryer.

Moisture in the joints of the floor needs to be treated with a vacuum cleaner and a hair dryer. Vacuum most of the moisture first, then blow with a hair dryer on the wooden floor splicing seams until dry. Here, it is important not to use hot air to prevent the surface from drying out due to heat and drying.

3. Dehumidify with air conditioner.

Turn on the air conditioner and turn on the dehumidification mode to keep the indoor air dry. If the immersion time is relatively short, as long as the doors and windows are closed, and the air conditioner is turned on to the lowest, it can be restored in one day.

How to maintain wooden floors:

1. Cleaning treatment: If the local board surface is accidentally stained, it should be removed in time. If there are oil stains, you can use an automatic rag or mop dipped in warm water and scrub with a small amount of laundry detergent; If it is before the stain is insoluble on the surface of the wood, the object or pigment must be removed.

2. Wipe and clean: keep the floor dry and clean, wipe the floor with a twisted soft wet towel, in the dry areas of the north, you can wipe the floor with a wet cloth in the dry season, and in the humid places in the southern climate, you should not wipe the floor with a wet mop or wash it directly with water.

3. Waxing treatment: In order to maintain the beauty of the parquet and prolong the service life of the paint, wax once every two months, wipe the stain before waxing, and then evenly apply a layer of floor wax and wipe it with a soft cloth until it is smooth and bright.

4. Keep moisture: After the floor is laid, you should move in as soon as possible. For rooms that are not inhabited for a long time, several basins of water should be placed in the room to maintain the amount of water, or a humidifier should be used to make up for the evaporation of moisture when the indoor heating is turned on; Ventilation should be strengthened during the rainy season in the south; The indoor environment should not be too dry or humid to prevent the wood floor from cracking, shrinking or expanding and deforming.

5. Prevent scratches: prevent hard objects such as heavy metal sharps, glass porcelain tiles, and shoe nails from scratching the floor; When moving furniture, do not push or pull directly on the floor, but lift and gently move the finches. Furniture that has been moving around a long time can be glued to the bottom with a layer of rubber.