How to clean the dirty stuff in the automatic washing machine

If there is dirty slag all the time, it means that the washing machine has not been cleaned for a long time, and this slag is the dust that falls on the clothes, which will stick to the inner wall and fall off when the washing machine is running.

If you want to solve this problem, you can pour baking soda and white vinegar together, and then use a rag to dip this solution to wipe the inner wall, and wipe it a few times to wipe it clean. If you really can't, you can also buy a special cleaning agent for cleaning, after cleaning, you need to soak for a while, which can play a role in disinfection.

Precautions for cleaning the washing machine.

1. Before cleaning, you must remember to cut off the power supply first to avoid electric shock. In addition, you can't use a particularly wet rag, be sure to wring it out, don't drip water, and then wipe it to avoid water ingress into the parts.

2. If you don't know how to clean, you can go to a professional to help, now there are many brands that will provide free cleaning services, just dial **, the staff will come to the door as soon as possible, which can also save you a lot of trouble.

Fill the watering can with a mixture of 1:1 water and vinegar and spray the entire inner drum of the washing machine;

Scrub the entire inner cylinder with a rag or paper towel, or use a used toothbrush if necessary.

If you think the inner cylinder is not completely clean and still contains mold, you can completely soak the rag in the mixed solution (or put some baking soda) and leave it in a difficult place to let it sit for 1 hour.

Here's how to clean up dirt in a front-loading washing machine:

1. Clean with a special detergent for washing machines

Fill the laundry bucket with clean water to the highest water level, then pour the detergent into the laundry bucket, run for five minutes to fully dissolve the detergent, if the washing machine can be heated, it can be heated to 40 degrees, then turn off the power of the washing machine, soak for about an hour, and then wash according to the daily washing mode, when the washing machine stops, a large number of dirt fragments will float on the water surface.

2. Use drifting agent to clean the washing machine

Add an appropriate amount of chlorine-containing bleach to the washing machine, then fill the washing machine with water, stir it evenly after the water is filled, and the dirt can be thoroughly cleaned after 20 minutes.

3. Use household white vinegar to clean the washing machine

First fill the washing machine with more than half of the water, then let it soak for more than three hours without putting any washing items, then start the washing machine switch to rinse a few times, then release half of the water, and finally pour the white vinegar into the washing machine bucket, put the water away after leaving it overnight, and then wash it with clean water again, and then open the lid of the washing machine and let it dry naturally.

Precautions for the use of drum washing machines:

1. When the "Wash" or "Rinse" program is selected, the roller will not run until the selected water level.

2. During the dehydration procedure, the cover must be closed, and the cover should not be opened from time to time.

3. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger.

4. Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents.

5. When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem is not solved after 2 corrections, it will stop and alarm, at this time, the cover should be opened, the clothes that are squeezed on the side should be placed evenly, and then the cover should be closed, and the "start pause" button can be pressed.

Although the automatic drum washing machine is more expensive than traditional products, it is really convenient to use, so the average family will basically choose this type when buying a new washing machine. However, after a long period of use, a lot of dirt will accumulate inside the washing machine, and it is certainly impossible for ordinary users to take it apart for cleaning, but we still have an easy way to clean it thoroughly. You can buy a special detergent for washing machines in supermarkets or on the Internet, which has a full range of functions, and in the form of small packages, the amount of one pack can be cleaned at just one time, and no other preparation is required, just open it and pour it into the drum of the washing machine.

Fully automatic front-loading washing machine.

Start the washing machine.

The way to clean a fully automatic front-loading washing machine is very simple, after pouring the detergent in, close the door of the washing machine and start the automatic cleaning function directly. At this time, the washing machine can automatically feed in water to dissolve all the detergent, and drive the detergent into every corner of the interior by repeated rotation. It has a strong surfactant that is able to fully dissolve all kinds of stains that adhere to the inner wall, and then be carried out with the flow of water.

Under a fully automated process, dirty water is discharged directly into the sewer.

Rinse with water.

The detergent used in automatic front-loading washing machines is inherently non-toxic, but it is still recommended to rinse thoroughly with clean water after cleaning. After cleaning, you can restart the cleaning process and let the clean water circulate in the washing machine so that any remaining detergent and stains can be completely removed. After such washing, it is much more reassuring to wash your underwear.

Hello, it is a pleasure to answer for you, and it is summarized for you as follows:

1. Pour a bag of washing machine detergent and an appropriate amount of laundry disinfectant into the drum. Note: It is inside, not poured into the laundry detergent separator box.

2. Press the normal washing start function, and it is best to start hot washing. Wait for about 5 minutes in the washing machine, press the pause button to allow the detergent and disinfectant to soak in the bucket for 1 to 3 hours, then unplug the power after the pause continues to clean normally.

3. Prepare a small basin and pour hot water, add clothes disinfectant and baking soda to mix together. Turn on the washing machine and dip a sponge in water to clean the plastic gasket on the edge of the barrel.

4. Remove the laundry filter, wash it in a small basin and put it on.

5. Remove the faucet, soak it in the cleaning water in a small basin for a while, and then clean it with a small toothbrush before installing it.

6. Turn on the power supply, press the start button without adding anything to the barrel and clean it normally again.

2. Pour the washing machine sink cleaner directly into the washing drum. After opening, use all the detergent at once, and do not pour the detergent into the washing machine (where you usually pour laundry detergent for washing).

3. Close the side door of the washing machine, skip the pre-washing program, directly select the main washing program, add water, and run for about 5 minutes to fully dissolve the detergent; When the dirt is severe, it is better to use 40 warm water.

4. Cut off the power and soak for 1 hour. For the first time or when the dirt is severe, it is recommended to soak for 2-3 hours.

5. Wash once according to the standard mode of daily washing of the washing machine. (Wash – Rinse – Dehydrate).

6. If the amount of dirt discharged is too much, you can put a bath towel or towel into the washing machine, and then follow the steps to operate again.

You take a look at the pro.

The washing machine has been used for a long time, and the dirt inside does not dare to look directly, so it is regularly cleaned with effervescent tablets.

1. First cut off the power supply of the washing machine to avoid the risk of electric shock during operation. Open the lid of the washing machine and use the corresponding screwdriver.

Unscrew the screws underneath the laundry bucket, remove them, and pull them up with your hands holding the raised blades. 2. After removing the blade, you can see that there will be four screws underneath, disassemble them with a screwdriver, remember to put the screws well, do not throw them away. 3. Finally, you can use a brush and a special detergent to clean up the dirt inside.

Relevant knowledge popularization: 1. The washing machine needs to be cleaned regularly in daily use, and if it is not cleaned for a long time, the heat when the motor is running will not be dissipated to the outdoors normally, resulting in overheating, failure or reducing the life of the washing machine. 2. If the buttons of the washing machine do not respond, it may be that the program motherboard of the washing machine is faulty, and you need to check the circuit motherboard, or use a screwdriver to check whether there are loose electrical components.

If loose electrical components are found, they need to be re-fixed with soldering and tested on the machine. 3. If the washing machine wants to operate normally, it needs a stable voltage, if the voltage is insufficient during the peak period of electricity consumption, it may cause the washing machine to fail to operate normally, and you need to contact the local power supply company to solve the problem.

Here's how to clean up the dirt inside the washing machine:

1. Pour the detergent directly into the washing machine barrel and add water (room temperature) to a high water level (when the dirt is serious, you can use 40 warm water for better results).

2. The washing machine runs for about 5 minutes, so that the detergent can be fully dissolved.

3. Turn off the power and soak for 1 hour (when the first use or dirt is serious, it is recommended to soak for 2 to 3 hours) and the detergent is fully dissolved.

4. Wash once according to the standard mode of daily washing of the washing machine.

Precautions for the use of washing machines in which sheds of Japanese people.

The temperature of the washing machine water should not be too high, generally 40 is appropriate, and should not exceed 60 (except for the high-temperature disinfection washing machine of the rolling bucket), so as not to burn the laundry bucket or form plastic aging.

When using the washing machine, wash it separately, choose the speed and slow, and adjust the temperature. Clothes of different fabrics have different washing times, so they will be washed separately to take what they need, so as to reduce unnecessary costs. Clothes of different colors are not only washed cleanly, but also washed quickly, and can be shrunk between 1 and 3 than mixed in common washing; A trillion chemical fiber and silk fabrics with a normal thin and soft texture can be washed in four or five minutes, while cotton and woolen fabrics with thicker texture can be washed in ten minutes.

Thick and thin do not wash, than mixed in the washing can effectively shrink the running room of the washing machine.

1. How to clean the bleach in the washing machine.

The washing machine may still look very clean on the outside after a period of use, but the inside is already very dirty, so it is necessary to take the right way to clean the inside of the washing machine. You can use the bleach cleaning method to remove the temporal part of the washing machine.

Pour in half a bucket of water, then pour in an appropriate amount of bleach, stir well, start the washing machine normally, and let the washing machine turn. Although there is no laundry inside the washing machine, this operation allows the washing machine to clean itself and avoid dirt and dirt. After waiting for half an hour, the washing machine is basically cleaned, then you only need to drain the dirty water inside the washing machine, and then add clean water to rinse and discharge.

This method is not only simple and convenient to operate, but also very effective.

2. How to clean the washing machine with a special cleaning agent.

Using detergent to clean the washing machine is a more scientific method than bleach, however, it should be noted that everyone should buy a professional detergent, which will be better and safer. At the same time, professional cleaning agents are much less harmful to washing machines. When using professional detergent to clean the washing machine, you can first find a large bucket, add water and cleaning agent to it, and then, stir evenly, preferably, add an appropriate amount of descaler to mix, pour it into the washing machine, start the washing mode of the washing machine, about 20 minutes or so, turn off the washing machine, drain the sewage, add clean water and rinse it out.

3. How to clean the hydrogen peroxide in the washing machine.

Soak. When it comes to hydrogen peroxide immersion method, everyone must think it is very complicated, in fact, it is relatively simple to operate. This method not only cleans the stains on the inner wall of the washing machine, but also plays a role in sterilization and disinfection.

Then pour in an appropriate amount of hydrogen peroxide, start the washing machine, and let the washing machine tell to run. It should be noted that when the washing machine is finished, do not discharge the sewage immediately, it is recommended to soak it for three hours, and then discharge the sewage, which can play a very good role in sterilization and disinfection.