Is there a lot of formaldehyde in a wardrobe at home?

It is not advisable to move in immediately. Whether it is solid wood or other materials with different environmental characteristics, they will emit some special smell when they are put into the wardrobe, but the difference is getting smaller and smaller. If you use a regular board, such as particleboard.

and MDF, a certain amount of glue is added during the manufacturing process, so it is recommended to ventilate for a period of time before moving in to prevent the risk of formaldehyde. If you use natural environmentally friendly boards such as solid wood, the ventilation time can be appropriately shortened, about a week. Although the content of formaldehyde in all kinds of furniture, decoration and decoration building materials has certain national standard restrictions, these materials will continue to release formaldehyde, and indoor air will inevitably be affected.

The best way to remove formaldehyde is to ventilate the windows at least twice a day for no less than 30 minutes each time. Minimize the amount of furniture and reduce formaldehyde emissions.

Try to choose products with environmental protection labels for decoration, the lower the formaldehyde content, the better, and it is best to do not contain formaldehyde. Newly bought furniture is left for a period of time before being used. Furniture or various home decoration materials will reach the highest peak of formaldehyde release within 3 to 5 months after opening the package, and it will enter a slow and small amount of release after half a year.

People don't have to worry too much about indoor formaldehyde. In recent years, the state has strict inspection and content restrictions on formaldehyde, ensuring that the formaldehyde content in most products is low. As long as the formaldehyde in the air is below a certain concentration, the harm to the human body is negligible.

The newly built wardrobe at home will contain formaldehyde. Because of the glue used in the wardrobe and the board of the wardrobe.

All of them have formaldehyde, and formaldehyde will increase when stacked together.

The amount of formaldehyde in the wardrobe needs to see what kind of materials are used in the wardrobe, if the wardrobe materials are environmentally friendly and healthy green products, then the formaldehyde must not exceed the standard. If you use substandard products, there should be a lot of formaldehyde.

It depends on the materials used.

There is very little formaldehyde with certified environmentally friendly materials.

The wardrobe panels made at home are the best, and the formaldehyde content will be less than the furniture you buy. The furniture you buy will be relatively larger and more formaldehyde, so it is better to build your own wardrobe.

I want to see whether there is glue in this processing process, whether it is environmentally friendly, and then whether this plate is an environmentally friendly material, that is, the material and the processing process, will produce methanol, which depends on your materials and processing process. If it is solid wood, the paint on the surface contains methanol, depending on whether it is environmentally friendly.

This kind of thing is not easy to say, mainly depending on the amount of formaldehyde contained in the material, high-quality wood contains less formaldehyde, or even does not contain formaldehyde. Smell the smell and smell it!

If you use environmentally friendly materials, the formaldehyde content is not high, and it can be basically removed through ventilation, and it is difficult to say if it is not environmentally friendly.

The wardrobe at home, the winter vacation, Chen Duoduo, there is no way to determine, it mainly depends on what materials you use. If you buy all certified, more large brand materials, then the user hits the wardrobe. The quality of winter vacation is still very small.

I don't think there is much difference between the wardrobe at home and the customization outside, first of all, I think if you want formaldehyde, you must buy the brand's wood core board, and the quality must be up to standard, I think this is not much different from the on-site wardrobe and custom wardrobe, so the main problem is the board.

Generally speaking, the new cabinet has formaldehyde components, because in the production process, it needs to use materials such as paint and glue, and this time it contains a certain amount of formaldehyde, so there will be formaldehyde after it is made. Therefore, the newly purchased cabinet should not be used immediately, it should be opened for ventilation for a period of time, and some charcoal bags should be placed in it to be used after the formaldehyde is released.

Extended Materials. How to remove formaldehyde from home?

Tip 1: Open the windows.

In fact, opening the window is the most, simple and most practical method, and it will not let you spend a lot of materials, just open the window, because the building materials we buy will have a lot of formaldehyde, if you want to go out, you must open the window, so that you can live more comfortably, and if the conditions permit, you can also choose a few fans with strong wind power The effect is better.

Tip 2: Activated charcoal.

You can also buy some activated carbon, which is also quite cheap, will not affect our lives, go out to have a formaldehyde removal effect, more convenient, and activated carbon. Just easily place it where you want to put it. Also, I can see it everywhere now, and I can place it anywhere.

Tip 3: Find a professional to remove formaldehyde.

In fact, we can also find professionals to help you remove formaldehyde, but the cost will be relatively high, formaldehyde can not be removed at one time, so we try not to choose this way, and find a professional to remove formaldehyde, you also need such things to be empty. Otherwise, it will affect our lives.

Tip 4: Air purifiers.

You can also choose an air purifier to remove formaldehyde, but although this way is easy to use, it is also more convenient, you can only use it once, because the air purifier will occupy a larger area, if it is just for one use, if you buy it, it is really a very troublesome thing, because there is nowhere to put it, and it is also a super chicken rib electrical appliance.

Removal method of formaldehyde in wardrobe.

Ventilation and deodorization. It is best not to use the newly bought wooden furniture immediately, because this is the time when the formaldehyde emission is the highest, if you place clothes in the cabinet at this time, then the fibers of the clothes may absorb some formaldehyde molecules, and when people wear them, the formaldehyde on these clothes may cause allergies. Therefore, it is best to ventilate and let the smell for a period of time before using it.

The higher the temperature of the heating method, the easier it is for formaldehyde to volatilize. Exposure to the sun or using heating temperatures can increase the temperature of furniture surfaces, which can accelerate the removal of formaldehyde. It can be set up for heating such as "small sun", but it is more power-intensive.

Be careful not to roast over an open flame to avoid danger.

Physical adsorption method.

The release process of formaldehyde can take up to 5 to 10 years, and it should not be taken lightly in the slow release process at a later stage. Placing the physical adsorbent material in the furniture can remove formaldehyde for a long time without affecting the use. Commonly used formaldehyde removal materials include Mayan blue, activated carbon, etc.

Wooden furniture should be packed in each compartment to achieve the best results.

Photocatalyst method. Photocatalyst is a catalyst because it can catalyze the decomposition of certain harmful organic compounds under the action of light, hence the name photocatalyst. Photocatalyst can decompose harmful gas molecules such as formaldehyde, toluene, and TVOC into harmless water molecules and other normal components in the air, and will not cause secondary pollution. Photocatalyst wood essential oil is a photocatalyst product suitable for furniture, which can maintain wood while removing formaldehyde.

Activated carbon adsorption method.

Activated carbon to remove formaldehyde is a relatively cheap and practical method, characterized by physical adsorption, thorough adsorption, not easy to cause secondary pollution. The physical effect of activated carbon is deodorization and detoxification; There are no chemical additives and no effect on the human body. Put two to three dishes in each room, and the indoor odor can be basically eliminated in 72 hours.

This method can be selected for medium and low pollution, and this method can also be used in combination with other chemical methods, and the comprehensive treatment effect is better.

The volume of the wardrobe is relatively large, and once it is put into the clothes for ventilation, it is not very good, so the volatilization of formaldehyde is relatively slow, it is recommended that everyone is that before the wardrobe is put into use, it is best not to put in the clothes, natural ventilation for a few months before use, so that the volatilization of formaldehyde can reach a safe index, otherwise it will not only affect the indoor air environment, but also cause pollution to the clothing page. When buying a wardrobe, you should also recognize the material of the wardrobe, the solid wood wardrobe will be relatively environmentally friendly, and the brand's products will be supervised by more users, so it should be relatively reliable.

.What is the material of your new wardrobe, if it is a wood-based panel, it is estimated that the formaldehyde content is relatively high.

Wood-based panels, as the name suggests, are boards made of chemical adhesives from the scraps generated by wood during processing. There are many types of man-made panels, and the commonly used ones are decorative wood-based panels such as particle boards, MDF boards, multi-layer boards, and ecological boards. Because they have different characteristics, they are used in different fields of furniture manufacturing.

Formaldehyde content is more:

The production of particle board is a wood-based panel made of wood or other wood fiber scraps, applied adhesive under pressure and heat, also known as chipboard.

MDF is made of wood fiber or other plant fibers, resin or other adhesives are applied, and then pressure glue is applied to form a type.

The inside of the particleboard is the granular shape of the cross staggered structure, the performance of each part direction is basically the same, and the structure is relatively uniform, so the nail holding force is good, the transverse bearing capacity is good, the surface is smooth, the texture is realistic, the bulk density is uniform, the thickness error is small, the pollution resistance, aging resistance, the appearance is beautiful, and it can be painted and various veneers.

Wardrobes more or less contain a certain amount of formaldehyde, because wardrobes need to use glue and paint, but the content of formaldehyde is high and low, and the content of solid wood wardrobes is less, and although wardrobes have formaldehyde, some wardrobes are within the scope of national standards.

Now there will be formaldehyde in it, because some strong strips are used.

Is there formaldehyde in the wardrobe, you can test it with a formaldehyde test box.

New wardrobes may be available, so ventilate them.

Not necessarily, whether there is formaldehyde depends on whether there are some materials containing formaldehyde in it, as long as the materials containing formaldehyde, he will contain formaldehyde.

At present, the wardrobes on the market can be divided into two categories: panel wardrobes and solid wood wardrobes according to the material

Among them, the panel wardrobe uses man-made panels as the main material of the wardrobe. A large amount of adhesive will be added to the production of man-made panels, because the adhesive contains formaldehyde, so wardrobes made of man-made panels will also carry formaldehyde residues.

Although solid wood is the main raw material for the production of solid wood wardrobes, in addition to the use of solid wood for the wardrobe doors and main body, the internal partitions, drawers and back panels are usually replaced by artificial panels.

Not only that, in order to protect the surface of the solid wood door panel from wear, the manufacturer will also brush the surface of the solid wood wardrobe with a layer of protective paint. Because wood paint also contains formaldehyde, solid wood wardrobes will also cause formaldehyde pollution indoors.

Formaldehyde stored on the wardrobe has a long release period, up to 3-15 years. The release rate of formaldehyde is affected by temperature, the higher the temperature, the faster the release rate of formaldehyde, then it is necessary to treat the formaldehyde of the wardrobe, otherwise the formaldehyde emitted by it will cause harm to the human body, and even life is in danger.

It is recommended that you first do a formaldehyde test to check whether the formaldehyde in the wardrobe exceeds the standard, if it exceeds the standard, you should do some aldehyde removal measures as soon as possible, otherwise the human body will be in contact with formaldehyde for a long time, which will harm human health.

1. Plants are the best products provided by nature to remove formaldehyde, and the more respected ones on the market are: pothos, spider plant, ivy, and aloe vera. These plants are a combination of beauty and talent, both to decorate the home and to purify the air.

3. Using activated carbon is also a good choice. The surface of activated carbon is rich in pores, which can adsorb indoor odors, and also has a certain effect on pollution control, but the activated carbon treatment capacity is limited, and it will produce saturation after about half a month of use, and it is impossible to continue to work.

5. Photocatalyst is an auxiliary method for the treatment of formaldehyde, mainly because it cannot decompose formaldehyde in the dark or under lightless conditions, cannot operate around the clock, and its range of action is small, and it cannot effectively remove formaldehyde in the room deeply. In addition, photocatalyst itself is a chemical and needs to be used with caution

6. We all know that the easiest way to remove formaldehyde is to ventilate, and the family with poor room ventilation can accelerate the air flow inside and outside the room through the fan, accelerate the discharge of formaldehyde-containing air, which can effectively reduce the concentration of indoor pollutants, but it can only treat the symptoms but not the root cause, and this method may not be practical in the season when you need to keep warm.

This depends on whether the brand wardrobe you use is a formaldehyde-free product, the main thing is that the wardrobe should not have too much paint to paint, and clean it up in time after it is removed, and the room will have too much smell when the wind blows!! Hope it helps you!!

Formaldehyde is the most typical carcinogen of decoration pollution, which can cause nasopharyngeal cancer, lung cancer and other cancer diseases. Zhong Nanshan, an academician of the Chinese Academy of Engineering, said that the number of blood diseases in children has increased by two to three times compared with before, which is also related to excessive indoor formaldehyde testing.