How to start using a new refrigerator that you have just bought

How to use the new refrigerator correctly:

The newly purchased refrigerator needs to be properly stored for three hours before turning on the power, because the refrigerated oil transported in the refrigerator is likely to run into the pipeline, and the refrigerated oil will reset after 3 hours of resting. At this time, the compressor will not be burned out by re-energizing.

After the refrigerator is powered on, let the refrigerator run to the set temperature before putting the food into the refrigerator, the purpose of this is not to increase the operation of the refrigerator and achieve the purpose of saving electricity.

Regular maintenance of the refrigerator:

1. Frequently clean the dust on the back or bottom of the refrigerator condenser and compressor. Dust can be removed using a vacuum cleaner or brush. Be careful not to use a damp cloth to wipe dust on the refrigerator and compressor;

2. When the refrigerator is out of use for a long time, the power should be cut off first, all the food in the box should be taken out, the inside and outside of the box should be cleaned up, and the door of the box should be opened for a few days to fully dry the box and disperse the odor in the refrigerator;

3. Check the drain pipe. If the drain is clogged, the water will leak into the refrigerator. Poke the drain with a wire to remove the things that have accumulated on the drain;

4. Don't ignore the cleaning of the door seal strip, dilute the bleach with 10 times the water, moisten it with a toothbrush, and finally wash the bleach with water. The rubber strip is dirty and easy to age, which will affect the sealing of the refrigerator and increase power consumption;

5. Check the vibration, noise and temperature of the compressor. When touching the compressor shell during operation, there should be no obvious sense of vibration, and the sound of the compressor starting should not be obvious during the day;

6. Clean and dry the inside and outside of the refrigerator with warm water or neutral detergent, and open the refrigerator door to ventilate and dry for a day.

Buy a new refrigerator, leave it at home for a day, and then turn it on to start cooling.

The refrigerator is one of the indispensable appliances in the home, which can help us keep our food fresh and extend its shelf life. However, if used improperly, it may affect the lifespan and effectiveness of the refrigerator. Here are the detailed steps on how to use your newly bought refrigerator correctly:

1.Placement: Start by choosing a suitable placement. The refrigerator should be placed in a well-ventilated place, away from direct sunlight and humidity, and away from heat source equipment.

2.Preheating: Before use, it should be preheated. Plug the plug into the power outlet and set the temperature knob to the highest setting, wait 2-3 hours before adjusting to the appropriate setting.

3.Loading food: Once the internal temperature of the refrigerator has dropped to the desired temperature, it is time to start loading the food. Be careful not to overfill or place too many items when loading food, so as not to affect the air circulation and cooling effect.

4.Cleaning and Maintenance: Regular cleaning and maintenance of your refrigerator can prolong its life and keep it in good condition. Clean the internal and external surface of the jujube every once in a while, and regularly defrost and clean the water tray and water pipes and other components.

5.Energy-saving use: When using the refrigerator, you should try to avoid opening and closing the door frequently, so as not to affect the cooling effect. In addition, the temperature level can be adjusted according to the actual demand to reduce energy consumption.

In conclusion, proper use of a refrigerator can prolong its life and maintain its cooling effect. Newly purchased refrigerators need to be preheated before use, and pay attention to the placement of food, food loading, cleaning and maintenance, and energy-saving use. If you don't understand anything, you can refer to the manual or consult a relevant professional.

The refrigerator you just bought should be left to stand for 2 to 4 hours before turning it on to avoid oil circuit failure.

The running time of the newly purchased refrigerator should not be too long when it is used for the first time, and it should be carried out intermittently, giving each part of the refrigerator a run-in process, and then running in a small gear or setting the temperature slightly higher. When the outside temperature is lower than 16 degrees, if there is a winter compensation switch, please turn it on, which is to help the refrigerator work. The winter compensation switch is usually located on the side of the thermostat.

In addition, the newly bought refrigerator should be placed in a dry and ventilated place, with a distance of more than 10cm from the wall, and the ground should be flat to facilitate heat dissipation.

Related Notes:

The transportation process of the refrigerator can not be guaranteed to be in a stable position for a long time, may have gone through a relatively long bumpy time, and may even be tilted, at this time the lubricating oil in the refrigerator will flow into the coil of the heat exchanger along the pipeline, and a small amount of lubricating oil will also be poured into the compression cavity of the compressor under the action of bumps and vibrations, so that the refrigerator is easy to cause the refrigerator refrigeration system to be paralyzed after starting, so for the sake of insurance, after the new refrigerator arrives, it should be left for 2 to 4 hours before turning on to avoid oil circuit failure.

The refrigerator should not be overfilled, and there should be room for cold air to penetrate the entire inventory. In addition, the refrigerator should be disinfected regularly. For 3-4 weeks, dilute bleach water or potassium permanganate should be used.

Wipe down with water and regularly clean the refrigerator, including the plates, especially the filter, which is often a place for dirt and germs to accumulate.

The above content refers to: Encyclopedia-refrigerator (a refrigeration equipment that maintains a constant low temperature).

First of all, after the refrigerator is bought, the new refrigerator should not be powered immediately, because the refrigerator will inevitably have bumps during transportation, which will cause the lubricating oil in the compressor to flow into the pipes, heat exchangers and even cylinders. If you insist on powering up the cylinder when there is a lot of oil leakage, the cylinder may be damaged. So, let the refrigerator sit for a while longer, at least 12 hours.

The interior and exterior of a new refrigerator usually have a lot of protective film, and you need to remove all the packaging and protective film before turning on the power supply. Since the inside of the new refrigerator generally has a plastic smell, you can open the refrigerator door when the refrigerator is standing, and you can also put some coffee powder, tea foam, grapefruit peel, activated charcoal, etc. in the refrigerator to offset and absorb the taste. After the rest is over, it is finally time to power up.

But it's just power-on, don't put anything in it, but let the refrigerator run empty for a while. This is because the task of the refrigerator is heavy when it is first running, and the temperature in the refrigerator needs to be lowered from room temperature to minus ten degrees, and if you put something, it will increase its burden even more, so it is best to wait until the temperature is reduced to the set temperature before putting in food. Generally, the no-load will last for 6-8 hours, during which the refrigerator will not be shut down, and after the refrigerator is shut down two or three times, you can put things in the refrigerator.

Common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, open the door to let the odor inside dissipate and then use the electricity, or use an electric fan to blow it inside to speed up the emission of the odor.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted to minus 18 degrees, and the temperature of the refrigerator should be about 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

Buying a new refrigerator for my home is a joy. But what if I asked you how to use your new refrigerator?You may think this question is ridiculous, but in fact, the newly bought refrigerator is particular about the first use.

So how should you use the newly bought refrigerator?Let me introduce it to you. Buying a new refrigerator for my home is a joy.

But what if I asked you how to use your new refrigerator?You may think this question is ridiculous, but in fact, the newly bought refrigerator is particular about the first use. So how should you use the newly bought refrigerator?

Let me introduce it to you.

1. Inspection

1. Check whether the location of the refrigerator meets the requirements.

2. Check the packing list and check whether the parts are complete.

3. Read the product instruction manual carefully and conduct a comprehensive inspection according to the manual.

4. Check whether the power supply voltage meets the standard requirements. The power supply used by the refrigerator should be 220V, 50Hz single-phase AC power supply, during normal operation, the power fluctuation is allowed between 187 242 volts, if the fluctuation is large or high and low, it will affect the normal operation of the compressor, and even burn the compressor.

5. If the voltage is too high, the motor coil will be burned out due to too much current: if the voltage is too low, it will be difficult for the compressor to start, resulting in frequent start-up, and it will also burn out the motor. The refrigerator is equipped with a special three-pin socket and is wired separately.

For users who do not have a grounding device, a grounding wire should be installed. When setting the grounding wire, you can't use the tap water and gas pipes as the grounding wire, let alone connect to the ** line and lightning rod.

6. After checking that it is correct, the refrigerator should stand for half an hour, which is due to the fact that the refrigerator has been bumped during transportation, so that the oil in the compressor can be set back. Turn on the power supply, listen carefully to whether the sound of the compressor is normal when starting and running, whether there is the sound of the pipes hitting each other, if the noise is large, you should check whether the refrigerator is placed smoothly, whether the pipes are in contact, and make corresponding adjustments. If there is a loud abnormal sound, the power should be cut off immediately.

2. Precautions for storing food

1. Before storing food, the refrigerator should run no-load for a period of time, and then put in the food after the temperature in the box is reduced.

2. Plug in the power supply and idle for 1-2 hours, let it get cold before putting things, don't put it too full the first time, and slowly add it to it later.

3. The refrigerator should not be filled with food, and 20% of the space should be set aside to make sufficient clearance between the food, between the food and the back wall of the box, so as to facilitate the convection of cold air in the box, so as to facilitate the rapid drop of the temperature in the box, which not only saves electricity, but also prevents food from deteriorating.

The newly bought refrigerator does not need to be used in a hurry, and all parts of the refrigerator should be checked according to the above before use. After giving you a suggestion, fruits, vegetables, etc. should be washed, dried and put in the lower fresh food box in the refrigerator. Because the water will quickly frost the surface of the evaporator, affecting the refrigeration effect.

In addition, our newly purchased refrigerators should be cleaned internally after a period of use.

1.Check the refrigerator.

Before using your newly bought refrigerator, the first step is to check that it is in perfect condition. Inspect the exterior of the refrigerator for visible damage, such as scratches or dents. At the same time, check whether the door of the refrigerator can be closed completely and test whether the refrigerator is functioning properly.

2.Wash the refrigerator.

Before using a new refrigerator, it must be thoroughly cleaned. Interior and exterior surfaces need to be cleaned with mild soapy water or a detergent with a germicidal effect. Removing dust and debris from internal surfaces is an important step in ensuring food safety and hygiene.

3.Place the refrigerator in the correct location.

Before placing a new slip or refrigerator in the kitchen, it is essential to carefully consider its location. The refrigerator should be placed in a dry and ventilated area, away from heat and direct sunlight. In addition, the refrigerator should be placed smoothly on the floor to ensure proper functioning.

4.Adjust the temperature.

Setting the right temperature is key to ensuring proper fridge operation and food safety. Most refrigerators have a temperature controller that allows you to adjust the temperature as needed. Before first use, it is recommended to set the refrigerator to the lowest temperature and then gradually increase it.

5.Fill the refrigerator.

After determining the correct location and setting the temperature, the next step is to fill the refrigerator. First, sort and place the food in the right place. For example, meat and dairy products should be stored in the coldest portions, while vegetables and fruits should be stored in warmer portions.

Also, make sure to avoid putting hot or warm foods in the refrigerator.

6.Make sure the refrigerator is dry.

Drying the inside of the refrigerator is key to ensuring that food stays fresh and safe. When the refrigerator door is opened, moist air may enter the refrigerator and cause mold growth. To ensure that the inside of the refrigerator is dry, it is recommended to place some breathable cloth or paper towels in it and change it regularly.

7.Maintenance and upkeep.

Keeping your fridge clean and performing regular maintenance is key to ensuring its proper operation and longevity. It is recommended to thoroughly clean the inside of the refrigerator once a quarter and regularly inspect the seals and vents for problems.

The above are the steps and precautions required to use the newly bought refrigerator. Proper use and maintenance can ensure the long-term stable operation of the refrigerator while ensuring food safety and hygiene.

Clean before use. The newly bought refrigerator is covered with various protective films. After the refrigerator protective film is removed, scrub the refrigerator with warm water.

If you're tired, you don't have to scrub it clean. You can put a few slices of lemon inside the refrigerator to eliminate the odor in the refrigerator.

In order for the refrigerator to dissipate heat at work,Place the refrigerator at least 10 cm away from the wall or furniture. Avoid direct sunlight or near heat sources, and should be placed in a cool and ventilated place.

Newly bought refrigerators should not be powered immediately. Leave it on for more than three hours before powering it on. Because during the transportation of the refrigerator, the refrigerated oil is likely to run into the pipeline.

It is to wait until the refrigeration oil is back in place before powering it on, which can avoid the situation that the compressor will burn out.

After the refrigerator is first powered on, run it with the refrigerator, set the temperature before putting the food in. It's best not to put too much food. Working at full load for a long time will affect the life of the refrigerator and will also increase energy consumption.

Precautions for the first use of the refrigerator

When the refrigerator is first powered on and starts to use, do not overload it. Because when our refrigerator is first shipped and the finch is moving, some parts of the internal machine need to be run-in. In this way, let the refrigerator run gently for a period of time, and then increase the load, which is conducive to prolonging the service life of the refrigerator.

After the refrigerator is operating normally, we first need to look at the set fluctuations. That is to say, you can use the voltage level of the multimeter to measure the voltage in your home. If the voltage is within the fluctuation range, then it can be used normally to dissipate early.

If it is out of the fluctuation range, then stop using it and check for the problem.

After 1 to 2 weeks of use of the newly purchased refrigerator, everyone should pay attention to scrubbing. The conventional practice is to use a rag dipped in water, and then wring out the water, basically using warm water, so that the rag we need is formed. After that, scrub the whole thing.

Ensure the cleanliness and hygiene of our refrigerators.

The above content refers to: Encyclopedia-refrigerator (a refrigeration equipment that maintains a constant low temperature).