Is it better to go open or dark for radiators?

With the continuous progress of science and technology, 5G has begun to enter our lives, and people have begun to upgrade their comfortable and intelligent home life, accompanied by hardcover rooms.

and the new delivery is small, and many people pour bitter water to express regret. Surface-mounted heating is convenient and comfortable, why do you regret surface-mounted heating, the reason is that these details are not in place, let's follow the golden flagship flag brother to find out.

The surface-mounted heating system is based on a heating stove (wall-hung boiler.

for heat sources, radiators.

For the end of heat dissipation, the pipes and fittings are installed on the wall and the top of the hidden place of the heating scheme. To put it simply, surface-mounted heating needs to have these three things: wall-hung boiler - pipe - radiator.

Compared with the radiator concealment, the surface-mounted radiator is a test of the construction of the technical level, and the seemingly simple things are actually worrying about and spending no less money than the concealed radiator. In home decoration, many people regret the reason why they regret installing radiators on the surface, almost all of them are not in place!

1. Adjust the heat distribution in time. It can be said that the pipes are basically open pipes, to a certain extent, the loss of heat is greater, and the number of pieces can be appropriately increased according to the heat distribution when determining the radiator. Many people don't pay attention to this, so that the heating temperature is not ideal.

2. Pay attention to the connection method of surface-mounted radiators. Specifically. Try to install two pipes in parallel, and connect the water pipes and return pipes of each branch through the joints.

Connected, the design is designed to shorten the length as much as possible, if it is too long, the water resistance of the radiator operation is high, and the radiator does not dissipate heat well.

3. Surface-mounted heating pays attention to on-site design. Because there is a difference between the hardcover room and the undecorated house, the bathroom area is involved, and the water and electricity layout must be prepared, otherwise it will be very troublesome to damage the water and electricity lines in the later stage.

4. Choose the surface-mounted radiator pipe carefully! Because of the direct exposure, if the radiator thermal expansion coefficient.

Low, it is easy to shrug and unsightly in the later stage, so it is necessary to pay attention to the selection of pipes with high expansion coefficient.

5. Concealed tube of surface-mounted radiator. The principle of adhering to is that within a reasonable design range, it can be secluded as much as it can be, and the up and down pipes should go to the corners, behind the door, and avoid large electrical appliances to prevent crossing.

6. Suppress! Pressure measurement! Leak! After installation, the service life is about 5 years, and the radiator is suppressed after installation! Pressure measurement! Leak! It must not be overlooked.

The radiator open pipe is still a dark pipe, and the dark pipe looks more beautiful, but once there is a water leak, it is not easy to find, if the radiator is to be replaced, the area may be removed, so the name pipe is better, and the open pipe heat dissipation is also good.

In the case of radiators, it is better to take the open pipe, so that it is easier to repair, but it should also be cleaned frequently.

It's better for you to go to the open tube or the dark tube, it's better to go to the dark tube, the civil tube is a bit ugly.

Summary. If you choose the advantage of the surface-mounted method, it is more time-saving and convenient to install, and if there is a problem in the later stage, it is relatively simple to repair, and you will find it in the process of driving. There is no occlusion, and the effect is even better.

If you choose the benefits of the way to install it, it is convenient to install it in a more time-saving way, and if there is a problem in the later stage, it is relatively simple to repair, and you will find it in the process of driving. There is no occlusion, and the effect is even better.

How to choose the concealed installation method, it should be in the wall, if there is a problem in the future, it will be more troublesome to repair.

There are two ways to install heating pipes: one is open pipe installation, that is, the installed heating pipes are exposed to the outside and can be seen by the naked eye, this way is convenient for the maintenance and replacement of heating pipes, there is water leakage or damage can be found in time, and repaired, and the pipe itself can also bring heat dissipation, increase the heat dissipation speed, the disadvantage is that it affects the appearance and affects the wall decoration;

One is the installation of the hidden pipe, that is, the heating pipe installed is hidden under the wall and ground, and cannot be seen by the naked eye, this way is conducive to the beautiful decoration of the interior, does not occupy the indoor space, does not affect the indoor furniture, the wall and ground decoration, the disadvantage is that the maintenance is inconvenient, find the leakage point, it is inconvenient to replace the pipe, once the water leakage occurs, the maintenance is particularly troublesome, the surface decoration needs to be removed, and then the pipe is found to replace the maintenance. The main reason is that after some decoration materials are removed, they cannot be installed back in their original seals, and they need to be replaced, and the new decoration materials are inconsistent with the original decoration, resulting in poor decoration uniformity. As shown in the figure below.

Summary. Hello, I'm glad to answer for you, about your question "Is it better to install a bright pipe or a dark pipe for wall-hung gas furnace pipes" has been inquired: Kiss the wall-hung gas furnace pipes are installed on a good road, and the maintenance is convenient and low.

The open pipe is directly visible and exposed outside, and the dark pipe refers to the one that is wrapped or covered or buried in the ground and needs to be opened to be seen, the national gas law has passed the gas pipeline that can be used in the wall, and the corresponding way is that the gas pipeline in the wall must use the national standard galvanized pipe, and the casing must be installed for the wall pipeline, and the gas pipe as long as it is seen, it is the open pipe that cannot be seen is the dark pipe.

Hello, I'm glad to answer for you, about your question "wall-hung gas furnace pipe installation is better or dark pipe" has been queried: kiss wall-hung gas furnace pipeline installation road is good, maintenance is convenient ** low. The light and dry pipe is directly visible and exposed outside, the dark pipe refers to being wrapped or covered or buried in the ground and needs to open the covered object to be visible, the national gas law has been slowly passed, the gas pipeline can be used in the wall, the corresponding way is that the gas pipeline in the wall must use the national standard galvanized pipe, for the wall pipeline must be installed casing, as long as the gas pipe is seen, it is the open pipe that cannot be seen is the dark pipe.

The hydrophilic furnace is a national standard energy-saving periodic operation furnace with an ultra-energy-saving structure and an energy-saving effect of 65%. The trolley adopts anti-impact sealing bricks, and the furnace door adopts a spring-type compression mechanism, which automatically seals the sensitive trolley and the furnace door, and integrates the rails, without the need for foundation installation, and can be used by high hands when placed on the level ground. It is mainly used for quenching, annealing, aging and heat treatment of various mechanical parts such as high chromium and high manganese steel castings, ductile iron, rolls, steel balls, 45 steel, stainless steel, etc.

Summary. Clearly managed. It is recommended that the gas pipeline be made into open pipes, which is more convenient to maintain, and if there are any potential safety hazards, they can be found in time, and now the gas company is not allowed to go through the hidden pipes.

Is it appropriate to make an open pipe or a hidden pipe for a gas pipe?

Clearly managed. It is recommended to make the coal fluctuation pipe into an open pipe, which is more convenient to maintain, and if there is any safety hidden danger, it can be found in time, and now the lack of service gas companies is not allowed to go to the hidden pipe.

Therefore, if you can, you can use the open pipe, because the gas pipeline buried in the wall for a long time will be damaged due to chemical and liquid corrosion and electrochemical corrosion, resulting in potential safety hazards. Once the pipeline leaks, it will cause serious accidents such as poisoning, burning, and **.