How to judge the quality of the lamp modification store?

1. Look at the façade of the lamp shop: Usually the door of the lamp shop has a "lamp upgrade center", "lamp change", "lamp modification", of course, it depends on whether the store has a brand authorization, for example, Apa stores will have a brand authorization letter;

Second, look at the products operated by the lamp shop: At present, if the lamp is modified, it is changed back and forth that few products, xenon lamps, LED lights, and many large and small brands at home and abroad, but to really have a brand effect, it is estimated that there are only a few. If the domestic lighting shop can get the authorization of a big brand, it is generally trustworthy.

3. Look at the equipment configured in the lamp shop: a professional lamp shop is generally indispensable for standard dimming intensity, an oven for removing headlights, a lamp room for indoor operation, a rest area for customers to rest in a larger store, a tool area for storing professional tools, and an operating table for headlamp disassembly.

Fourth, look at the product: Usually the store with brand authorization will have strict control, or it is transparent.

Fifth, look at the craftsmanship of the lamp change master: look at the craftsmanship, you may wish to observe when the master helps other cars to change the lights, to see whether the operation is standardized, whether the protective measures are in place, whether the items are standardized, etc., whether there is protection after the lampshade is opened, whether there is protection when cutting the lens, whether the gap is normal after the installation of the headlights is completed, whether the sealant is handled, whether the lights are debugged, whether the high beam tangent is on it, whether the high beam diverges, etc.

6. After-sales service: Generally, large brand stores will have a relatively complete after-sales service, and Appa's products are guaranteed for 3 years, nationwide.

7. The service attitude of the refitting shop: attitude determines everything, and this sentence is true before doing things. A good tuning shop, no matter how busy the work is, will have a good service attitude, and treat customers very friendly and enthusiastic.

The twenty-second round: Listen to the song Wenbao Yuwu Zen machine, and the lamp-making fan Jia Zheng's sad words.

Modified car lights are still quite good, and there are three types of car light modifications;

1. Replace the bulb with a single bulb and directly replace the old bulb with a new bulb, the operation process is simple, and under normal circumstances, the owner can do it alone. However, this change not only has a limited effect, but also is prone to astigmatism, which is not beneficial to others and oneself. The reason for this phenomenon is that the original car parts do not match the new bulb, which causes the focus to deviate and cause astigmatism.

Therefore, this modification is not recommended;

2. Replace the headlight assembly, directly throw away the old headlight assembly, and replace it with a new headlight assembly, and the operation process is relatively simple. This upgrade method is mainly to make the headlights look more beautiful, because many manufacturers will add some cool angel eyes, devil eyes and other decorative lights in order to increase the selling point. But this is actually a test for the annual inspection, and the pass rate is not high.

Moreover, most of the headlight assemblies are used in the auxiliary factory accessories, and the quality and performance are generally low, and the lighting effect is not significantly improved. Therefore, you can choose this method according to your preferences;

3. Changing the xenon lamp bifocal lens in the service state is to replace the accessories in the headlamp assembly ruler with a new xenon lamp bulb, bifocal lens, stabilizer and other three main accessories, the operation process is more complicated, different models have different configurations, and the modification methods are also different. Of course, the lighting effect of the Ling noise after the change, is the best among the three modifications, after adding the bifocal lens, not only greatly improves the lighting brightness, irradiation distance, but also can achieve the combination of how close and far the effect. It can be said that the collocation is flexible and changeable, so that the choice of car owners is more abundant.

Therefore, this modification is highly recommended.

Millions of car purchase subsidies.

This question is asked in turn whether the lights of your original car are good. If the lights of the original car are perfect, then changing the lights is a waste. If the lights of the original car are poor, then changing the lights is a must.

One: What's the difference? The brightness is too dim, so it is changed for driving safety.

2. Annual inspection. Don't mistakenly think that you can't pass the annual inspection if you change the lights, but see if you have changed the lights correctly according to the principles prescribed by law. Similarly, if the light is too dim, less than 1000 lumens, it will not pass the annual inspection.

Therefore, whether to change the light or not depends on the needs of each person. Generally, owners of halogen lamps will choose to upgrade xenon lamps.

Below is an owner-turned-Apa Guardians

It is good to reasonably upgrade the car and change the lights, but it is not good to modify it indiscriminately in violation of laws and regulations.

It mainly depends on your hobbies! Generally, there is no problem with good accessories! Now it's very simple to change the lights, buy a finished headlight and install it back, plug in the original car plug! The main thing is to distinguish the quality problem of the headlight line! It's definitely better to change it than not to change it!

If your car is in the warranty period, you have to dispel this idea, the consequences you know, after the warranty period before you think about it.

This is really going to depend on how to change it!!

For example, some halogen headlights are directly installed with xenon, and the light is very scattered, which is definitely not good.

If it is to install bi-xenon lens headlights, that is, to modify the lens, the effect must be very good, you can freely match accessories according to your choice and budget, and you can greatly improve the safety of night driving after the change, so it is really necessary to change.

The key is whether you feel the need for it.

It's not very good, and most of the changes are not ideal.

It depends on the situation, and generally does not change.

Advantages of halogen lamp: Cheap, thanks to low color temperature, strong penetration in rain, snow and fog.

Disadvantages: poor brightness, short life.

Economical family cars are equipped with halogen lamps, even high-end car fog lamps still use halogen lamps, because it is extremely penetrating in foggy weather, its color temperature is low, but also reduce the diffuse reflection caused by fog, improve driving safety.

Advantages of xenon lamp: Xenon headlights have high brightness, which is more than 3 times higher than halogen lamps, and the driving vision is very clear in rainy days and nights.

Disadvantages: There is a delay in lighting, it takes 2-4s of time, the light gathering is not good, it needs to be equipped with a lens, generally blue and white xenon lamps will make people feel dizzy, it is best to modify the yellow xenon lamp to avoid causing the strong light of the opposite driver to dazzle the situation. In addition, xenon lamps have weak penetration in foggy and ice and snow weather.

Modified xenon lamps must be equipped with lenses to gather scattered light into parallel light, which has better directivity. Otherwise, it will be easy to dazzle, just like driving the high beam, so that the opposite driver has a blind spot, which seriously affects driving safety.

LED lights. Advantages: energy saving and environmental protection, very low energy consumption, long service life, no delay in lighting, fast response, high brightness, about 80% higher than halogen lamps. The color temperature is moderate and not dazzling, and there is no glare problem.

Disadvantages: high maintenance cost, poor heat dissipation, need to be equipped with heat dissipation device.

From above, among the three light sources, LED headlights have better comprehensive advantages. Although the brightness of xenon lamps is higher than that of LED headlights, there are defects such as delay, no light focus, and no correct high beam function, resulting in the problem that the brightness of the high beam is too high and it is easy to shake to the opposite driver, and there are certain safety hazards. The LED light is much brighter than the halogen lamp, the color temperature is moderate and not dazzling, and it will not cause visual blind spots to the opposite driver.

There are generally two kinds of lamp changes, one is to install decorative lamps such as angel eyes and demon eyes, which are mainly for coolness. The second is to upgrade the headlights to improve the illumination, such as changing the xenon headlight bifocal lens or changing the LED headlights. The first is sad because the cosmetic changes are too large and it is a violation.

The second depends on the specific situation, first of all, your lighting change results must meet the following requirements:

1. Astigmatism is prohibited. The best solution to change the light is to add a bifocal lens, the modified light will not be dazzling or astigmatism, and will not affect the safe driving of others;

2. The height of each car is different, so adjust the lighting angle to avoid affecting the safe driving of others;

3. The low beam is not less than 1050 lumens, and the high beam is not less than 1450 lumens;

4. The light intensity of the driving vehicle is not less than 15000cd and not higher than 120000cd;

5. The color temperature is required to be no higher than 6000K, otherwise the annual inspection equipment will not be able to detect the light. At present, the owners who have changed the lights correctly have not been unable to pass in most cities across the country. However, there are differences in the annual review requirements of the traffic police departments in various places, and I suggest that you should ask about the local annual inspection situation before modifying.

Count as a violation.

According to the relevant provisions of the illegal modification of motor vehicles:

1. Article 10 of the "Provisions on the Registration of Motor Vehicles" stipulates that if a registered motor vehicle needs to change the nature of use, body color, body or frame, etc., the owner of the motor vehicle shall apply to the vehicle administration office at the place of registration to change the registration.

2. Article 16 of the Road Traffic Safety Law of the People's Republic of China, Item 1 stipulates that no unit or individual shall assemble a motor vehicle or change the registered structure, structure or characteristics of a motor vehicle without authorization. Without the permission of the public security traffic management department, unauthorized modification of the motor vehicle chassis, engine, suspension, transmission system, direction system, tire hub, headlights, body color spraying and appearance structure, as well as the relevant technical data of the motor vehicle and the announcement data of the competent department of motor vehicle products are all modifications. (Announcement data includes:.)

Vehicle steering form, body size size, fuel type, number of leaf springs, wheelbase, number of tires, tire specifications, total mass, approved load quality, environmental protection standards, displacement power, number of axles and vehicle appearance**).

The power of the headlights should not exceed 50 watts, that is, the bulb plus the transformer should not exceed 50 watts, otherwise there is a possibility of burning the line. If the original lamp is a halogen lamp with a convex lens, just add a pair of xenon bulbs and a transformer, and there will be no problem. If you don't have a convex lens, add a pair of xenon bulbs, and the road is not very bright, but the opposite car looks at the light very bright, so it is better not to add it.

Article 97 of the Road Traffic Safety Law of the People's Republic of China also stipulates: "Those who illegally install sirens and signs and lamps shall be forcibly removed by the traffic management department of the public security organ, confiscated and fined not less than 200 yuan but not more than 2,000 yuan."

Lamp modification depends on the specific degree of modification, as long as it does not exceed the legal permission.

Yes, this is an illegal modification.

The hazards of automobile lamp modification are as follows:

1. If you think that the current car lights are not bright enough, then you are now using the original car halogen bulb that was equipped with the car when it left the factory. The bulb is generally 55w, if it is in the urban area is generally enough, if you go on the high-speed, run long-distance, the higher requirements are not enough. The lights can be changed, and many people change them now;

2. In order to improve the brightness, there are now two methods, one is to replace the high-power bulb, just like the one upstairs said, use 100W high-power bulbs, but think about it, you also know that the 100W halogen bulb is too power-consuming, one on the left and right is 200W, and two on each is 400W, which is very, very high pressure on the car battery;

3. The luminous efficiency of LED lamps is relatively high, which is more than twice that of fluorescent lamps. However, if we use household energy-saving lamps to compare, it can save about 1 time energy compared with incandescent lamps, and energy-saving lamps can save more than three times energy compared with LED lamps. The same is true for car use, the same daytime running lights, LED energy consumption only accounts for 1 20 halogen lamps, and the current cost of LED is also declining year by year, according to statistics, the ** LED light is reduced by 20% every year;

4. At present, the average service life of automotive LED lights can reach more than 50,000 hours, and some well-known lighting manufacturers can provide LED components with a life span of more than 100,000, which is equivalent to eleven years without replacing the lamp bulb. The structure of LED lights is very simple, its impact resistance and shock resistance are very good, there is no need to worry that the bulb will be easy to break, and it can adapt to various harsh environments;

5. The monochromaticity of the spectrum of LED lamps is good, there is no redundant infrared difference line, ultraviolet lamp spectrum, neither heat nor radiation, small glare, and the waste can be **, no pollution, no mercury element, can be safely touched, and belongs to a typical green lighting source. Small size, light weight and low value, with its characteristics can be designed thin, light, compact all kinds of lamps and lanterns, to provide space for car styling design. The LED headlights are encapsulated by resin, which is not easy to break, easy to store and transport.

What is the impact of changing the lights on the car It does not have much impact on the car, but it will have an impact on the surrounding cars, and a large number of headlights will still affect the sight of the opposite car: 1. During the annual inspection, the appearance of the vehicle must be the same as that on the driving license. However, the modification of the headlights is only the modification of the difference inside the lights, as long as the light irradiation meets the regulations, it will not have an impact; 2. As we all know, everything has a service cycle, and the lights are no exception, which will age normally, resulting in dim lights, and some of the lights used are of good quality and lack of lights.

Whatever the reason, as long as the light brightness is insufficient, it will not be able to pass the annual inspection; 3. The annual brightness of the headlights shall not be less than 1050 lumens, and the high beams shall not be less than 1450 lumens. However, if the brightness of the lamp bulb used is too high, it may also lead to the failure of the annual inspection. @2019