I close the windows every night, but why is the air still leaking? How to solve the problem of air l

Every time I feel that I have closed the window tightly, I still feel the air leakage, in fact, because the window itself has been aged, I have encountered such a problem before, because my family bought a second-hand house at that time, it has a history of more than 10 years, and when I lived in, it was obvious that the windows were old, so even if it was closed tightly, it could not block the wind, and there were still gaps between the windows and windows, so I wanted to solve the problem of air leakage. The best thing to do is to replace the windows with new ones so that they won't leak anymore.

If your home is a new building, you can't feel the air leakage when you close the windows after moving in, because the materials of these windows are new, and the quality is still relatively good.

It is generally made of stainless steel or a better frame, so there is no need to worry about air leakage in the gaps.

If there is a leakage of air in the newly replaced window, it may be that the size is not selected and it is not installed completely, or it may be that the seal is not done well, and it is best to ask the installer to check the window again. If you don't want to get a new window and think it's too expensive, you can also choose to seal the edges and corners of the window.

The corners are reinforced, and the gaps are all pasted with sealing strips, which is also very warm, and sealant can also be used.

Filling in the gaps between windows is a more practical method.

Of course, it is recommended that you can choose to change a new window, after all, it has been used for a long time and its service life has arrived, even if it can be reinforced for a while, but there will be various problems after a long time, and a new window can be used once and for all.

It may be because the sealing strip of the window is not very strict, so there is this feeling of air leakage, and you can redecorate the window again, so that there will be no more air leakage.

It should be that there is a gap between the window and the wall, so there will be air leakage, it is not that the window is not critical, you can buy sealing strips from the Internet to seal the window and the wall, so that there will be no air leakage problem.

The reason why the window is closed tightly but still leaks may be that the window is aging, and we should replace the sealing strip and wool strip on the window to make the window truly air-tight.

Because there is a gap in the connection of the window, the material used is not completely resistant to the wind, so there will be air leakage. You can use a film to solve the problem, or you can use tape to solve the problem of air leakage.

In winter, the following measures can be taken for window leakage, such as: pasting with tape, changing glass, hanging curtains, pasting with kraft paper, etc., as follows:

1. Paste with adhesive tape.

If the gap in the window is not very large, you can use adhesive tape to glue the gap in the window to prevent wind from leaking through the gap.

2. Change the glass.

If the glass is not very expensive, and the gap in the glass is relatively large, you can choose to replace it with a new glass.

3. Paste it with kraft paper.

If it is some old-fashioned glass, you can use kraft paper to paste the gaps in the window to prevent the glass from leaking, it is better to buy kraft paper in large circles.

4. Hang curtains.

In winter, you can hang thick curtains on the glass, which will warm the temperature in the room and also prevent the windows from leaking.

What should I do if the window leaks in winter? Just this little action, let's learn it quickly.

Four tricks to solve the problem of window leakage is the problem of old-fashioned window window layout sandwich, plastic steel window layer plastic, window gap treatment, and window installation residual problems.

1. The old-fashioned windows and windows are arranged with a mezzanine.

For double-walled old-fashioned windows, the best thing to do is to fill the window-to-window intervals with sawdust, which can solve the moisture of the window and also block the strongest cold air at the bottom of the window. For the window cracks of such windows, they can be sealed with kraft paper and paste to ensure that the airtight temperature is extremely high.

2. Plastic steel windows are layered with plastic.

The plastic steel window has been used for a long time, and it is easy to breathe, and the gap at the interface is too large to be bonded. The best way is to paste a sponge around the window, and then cover the whole window with plastic, which absorbs heat and is airtight, and the temperature is well maintained.

3. Window gap treatment.

If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, then fill the gap with high-grade cement river sand, and finally do the finishing repair; Air leakage between the window sash and the window frame can be considered to add sealing strips, felt strips, etc. If the gap is large, it is better to add a layer of plastic steel window to the original window.

4. Problems left over from the installation of windows.

First of all, it is necessary to see that the problem left by the worker installation is not in place or the product itself is a problem, the reason for the product should be found a dealer, or a manufacturer, if the worker has a little problem during the installation, it can be disassembled and reinstalled.

What should I do if the window leaks in winter? Just this little action, let's learn it quickly.

1. Styrofoam filling.

Window air leakage needs to be filled with styrofoam, first wipe the air leakage on the window with a rag, and then apply some styrofoam to the gap of the window, and wait for the glue to foam to plug the gap on the window, which can solve the problem of window air leakage.

2. Plastic seal.

Window air leakage can be sealed with plastic, first apply glue around the window, and then use a window-sized plastic sheet to stick to the window, the plastic can block the entry of air, if the wind is too strong, you need to install another layer of plastic steel window.

3. Sawdust blockage.

Window leaks can be plugged with sawdust, find the location of the air leak on the window, and then stuff the sawdust into the gap, which can not only prevent the wind from blowing in, but also absorb the moisture in the window to prevent the window from cracking due to moisture.

Actually, this is a very normal phenomenon. Air is not static, it flows all the time. In a room, there is always an air flow because the air is constantly heating or cooling.

Although we can't see all this with the naked eye. When the air is heated, it expands and becomes lighter; Conversely, air cooling shrinks and becomes heavier. The air around a lamp or heater is lightened by the heat, so it is squeezed upwards by the cold air.

At the same time, the air next to the window or wall shrinks due to the cold and flows to the ground. We can observe the movement of air in the room through the hydrogen balloon that the child plays with. Find a hydrogen balloon and hang a weight on it so that the balloon can float freely in the air.

Then, we put the balloon next to the heater. At this point, the balloon is forced by the air currents and travels through the room: one moment it flies from the heater to the ceiling near the window, then it falls to the floor, then it returns to the heater, and so on.

So, in the cold winter, even if the windows are closed very tightly and no air comes in through the cracks in the windows, we still feel that the windows are leaking, especially near the ground.

If it is a sliding window (sliding window), no matter how good the quality is, no matter how expensive the price is, there will be more or less this situation. You can go to Ma Yun's house to search for door and window insulation film, which is simple, convenient and saves money, which is a good choice.

If it is a casement window, it is divided into many situations, it may be that the lock point is loose, it may be that the sash and window frame are deformed, or it may be that the sealing strip is aging and hardening, and the sealing function is lost. Pay attention to the observation and symptomatic treatment.

Just spread another layer of plastic sheeting!

**Search for sealed windows.

The five methods are: plastic steel window layering, window gap treatment, window quality problems to find manufacturers, reinforcing glass, and replacing heavy curtains.

1. Plastic steel windows with layers of plastic.

The solution is to paste the sponge around the window, and then cover the entire window with plastic, which can achieve the purpose of impermeability.

2. Window gap treatment.

If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, and then fill the gap with high-grade cement river sand, and then do a finish to repair the window sash and the window frame.

3. Find the manufacturer for window quality problems.

First of all, it is necessary to see whether the worker is not in place to install the remaining problem or the product itself has a problem, the reason for the product should be found by the manufacturer, if the worker has a small problem during the installation, it can be disassembled and reinstalled.

4. Reinforced glass.

There is no problem with the size of the glass, it may be that the glass is not reinforced, shaking back and forth, and it will naturally enter the air, at this time, you can also use sealant to fill the gap between the glass and the window to strengthen the glass.

5. Replace heavy curtains.

If you feel the wind coming in from the glass, you can buy and hang heavy curtains to block out some of the wind and then ease the room.

Three frame changes, focus filling, glass changes.

Add cotton curtains or a thick cloth curtain.

2.Glue newspaper or tape to the gaps in the windows.

3.If the window gap is relatively large, you can use foam glue or glass to fill the window gap to prevent air leakage.

4.Ask a professional to change the seal.

5.Install thermal film or plastic film.

6.Double-glazed.