What should I pay attention to when choosing a towel rack?

It is used for hanging towels and bath towels, and the main place of use is the bathroom. It can also be used for aesthetic decoration, such as placing flower pots, stacking sundries, etc. Some full-featured towel racks also have functions such as heating, drying, and disinfection, and inhibiting the growth of bacteria.

The towel rack can be sealed with a thin iron pipe by smashing its ends into the wooden wedge, and using a nail to smash a small eye in the center of the wooden wedge. Then take two pieces of angle iron, make two holes on each side of the wall, and make one hole on the side of the wall. so as to be connected to the iron pipe.

First, use wood screws to fix the iron pipe on the angle iron, then punch holes in the corresponding position on the wall, and fix the angle iron on the wall with wooden wedges and wood screws. The raw material of copper chrome towel rack is brass, and the "rust" of copper is not the same as the rust of iron, so why do customers sometimes report rust at home? There are several scenarios:

The towel rack plating is not well protected, resulting in the destruction of the plating, brass and air contact, and the "patina" may grow in a humid environment. If you don't wipe it often, over time, some of the water trickles form dirt on the surface, and eventually appear as speckled black spots.

Poor water quality, containing metal ions, coupled with not wiping regularly, or some hygienic dead areas, these water droplets rich in metal ions interact with the air, and rust spots may occur after a long time. The hardness of pure aluminum products is poor, and it will be blackened, but after oxidation, the hardness of alumina products has been greatly improved, and it will not be blackened, and the wear resistance is good, and the alumina products will not rust. The lower the grade stainless steel will rust, the higher the chromium content of stainless steel, the less easy it is to rust, 304 stainless steel has a chromium content of 18%, good stability, strong corrosion resistance, and will not rust even if it is placed in a humid environment for a long time.

Zinc alloy towels do not rust. However, the quality is not as good as other materials, and it is easy to break. We understand some of the reasons for the rust of the towel rack, so for these situations that may lead to rust, we must comprehensively consider various factors when choosing a towel rack to avoid possible after-sales problems.

In comparison, the closed type at one end is better than the closed type at both ends, and it is better in terms of convenience of access and hanging, especially in the multi-rod structure, the advantages are more obvious. Although the two ends of the multi-rod are closed, especially the use of the inner one has the defect of extremely inconvenient to take and hang, but for those who are allowed to install less space off the wall, it can only be a helpless choice, and some of the installation space conditions are too poor can only be solved in the form of hooks. The kind of multi-rod movable type, if all are used, due to the large angle, the space occupied is not as little as imagined, otherwise the towels will be attached to the fixed end, and this one will be hung when the other one is moved.

About the sucker type, some sellers use a story that fell in the middle of the night and thought it was a thief to belittle the sucker type, just imagine, a person falls while walking, the reason should be road problems, their own problems, or other problems. The advantages of suction cup installation characteristics and cheapness are obvious to all, and now the reliability of the strong vacuum suction cup also meets the normal use of the suction cup towel rack, and it rarely falls off. Otherwise, there won't be so many buyers, and I think it's a good choice for those who don't want to break the wall for the time being, and it's not convenient for people to install.

In terms of quality, the all-copper towel rack is the best, followed by the aluminum alloy towel rack; Again the stainless steel towel rail, and finally the zinc alloy towel rail. Of course, this should also be considered according to the economic ability and grade of the hotel. It can be selected according to the moisture resistance.

Because the environment in which the towel rack is located is humid, it is particularly important to determine the moisture-proof and anti-corrosion functions of the towel rack. When we buy, we should fully consider the material of the towel hanging, so as to make a choice. Before installation, you can use one hand to pinch one end of the towel hanging rail, and the other hand to wipe it from one end to the other, and the quality will touch small burrs, and even peeling off the paint piece.

These ills are difficult to detect with the naked eye. Also pay attention to the quality of the plating and coating of each shelf base. The angle of view and the incident light are about 70°, and it is relatively easy to detect whether there are defects.

Towel racks do not occupy much in the bathroom, but the convenience of using them has a great impact on people's washing mood. A good towel rack should have the characteristics of easy access and good material, if it is easy to rust during use, it is really unpleasant. So how to choose a towel rack?

1. Compare materials. The commonly used materials of towel racks mainly include stainless steel, copper, aluminum alloy, iron, plastic, etc., and the towel rack made of stainless steel is not easy to rust, has strong surface stability, and is also the most commonly used. Plastic towel racks don't have the same longevity as other materials, but plastic can be processed into a variety of colors and shapes, making them suitable for users who don't use them for a long time.

2. Compare styles. Now the structure of the towel rack on the market has a single and double-layer, a rod multi-rod, one end of the closed multi-end closed type, the spacing fixed type of movable type, hook type suction cup type screw fixed type, etc., one end of the closed type is more convenient than the two ends of the closed type in the hanging type, the installation of the suction cup type is cheap, but it is easy to fall off, the fixed type should be determined according to the towel rack material and the situation of the wall, so you must carefully choose the practical structure when choosing.

3. Compare processes. As people's needs become more and more diversified, there are also a variety of towel rack designs on the market, which are also colorful in terms of color, and are no longer just golden space aluminum in terms of technology, but also antique, old, brushed, baking paint and other processes, and the space aluminum towel rack with baking paint process is the most durable, later than care.

Bathroom towel rack is an indispensable part of bathroom decoration, so people must know how to choose a bathroom towel rack when choosing, so that the towel rack can be kept for a long time and not easy to deteriorate.

1. The surface technology of the towel rack.

Towel rails have to deal with wet towels every day, so if the surface is not properly treated, it is easy to rust. When purchasing, pay attention to the gloss and flatness of the surface of the towel rail.

2. The quality of accessories should not be ignored.

The main accessory of the towel rack is the screws. Try to choose stainless steel screws to avoid oxidation and rust. The flatness of the towel rack base must be good, otherwise it is easy to install unstable.

How much is the right size for a towel rack

The size of the towel rack is generally 50cm, 60cm, 70cm, etc., when purchasing, you can choose according to the number of towels and the size of the bathroom.

Expand the knowledge: how to make your own towel rail

Tool materials: hacksaw, all-purpose glue, towel rack hook, stainless steel pipe.

Method steps: 1. First judge the length of the towel rack you need, and then use a hacksaw to cut the stainless steel pipe to that length.

2. Then use a hacksaw to saw two stainless steel stubs as beams.

3. Fix the beam on the tile with all-purpose glue.

4. Then fix the stainless steel long tube on the beam with universal glue.

5. After that, hang the towel rack on the long steel pipe.

How to remove the towel rail

Tool: Screwdriver.

Method: 1. First, use a screwdriver to unscrew the fixing screws on the towel rack and the wall fixing.

2. After the fixing screws are removed, remove the bottom beam and put it away.

3. Then follow the same method to remove the fixing screws on the towel rack.

4. Finally, store the towel rack and screws.

According to the shape, it can be divided into towel racks, towel rails, towel rings and other shapes, which can be selected from your own aesthetic preferences.

The above is today's sharing, I hope it can help you.

Whether the bathroom is large or small, there will always be towels to hang. And the appearance of the towel hanging is also changeable and distinctive, so as a necessary "**" in the bathroom, what material is the towel rack good? What are the ways to choose a towel rack?

Next, I will provide a few tips to those who want to buy. Whether the bathroom is large or small, there will always be towels to hang. And the appearance of the towel hanging is also changeable and distinctive, so as a necessary "**" in the bathroom, what material is the towel rack good?

What are the ways to choose a towel rack? Here I will provide a few reference methods for those who want to buy.

What material is good for towel rail

There are many materials for towel racks, such as stainless steel, space aluminum, copper, zinc alloy, plastic, iron, wood, etc. Towel racks made of different materials have their own characteristics.

1. Space aluminum towel rack.

The towel rack of this material is relatively high, the material is stable, no rust, and environmentally friendly, but many of the space aluminum on the market are just aluminum alloys, which are quite different from the space aluminum in aerospace equipment, after all, only a small number of manufacturers can produce. So those compared space aluminum towel racks need consumers' attention.

2. Copper towel rack.

This kind of towel rack is usually made of brass as the main material, and the surface is chrome-plated, showing a good mirror effect of the Lippi Bridge, giving people a noble feeling. Copper has high density, high strength, good stability, will not rust, is more expensive, and is a good towel rack material. However, if the copper is not chrome-plated, it will have a patina.

3. Stainless steel towel rack.

This material towel rack is widely used, with a smooth surface and a good appearance. At present, the better stainless steel material is 304 stainless steel, and the 201 one is slightly worse, which has been polished or brushed with a mirror effect. Stainless steel towel racks are hard, durable, not easy to rust, corrosion-resistant, and widely favored by consumers.

4. Zinc alloy towel rack.

The towel rack of this material has a variety of colors, styles and styles, and will not rust, but its weakness is that the material is relatively brittle, easy to break, and can grow rust spots for a long time, so it is not recommended to choose a towel rack of this material.

How to choose a towel rack

1. Don't be misled by those unscientific means, now many businesses in order to increase the selling point of products, using very exaggerated propaganda methods, saying that "aluminum alloy" is "space aluminum" and other phenomena.

2. Stability of the surface of the material. Learn about the basic properties of various materials, as well as the plating on the surface of the bathroom towel rack material.

3, according to common sense different materials, structure, processing technology and innovative design, is the most decisive factor, because this kind of products rarely have the function of hedging value, so it is recommended that consumers hold the bridge from the practical, aesthetic aspects of more consideration.

At present, consumers' pursuit of personalization is becoming more and more obvious, so the material of the bathroom towel rack is becoming more and more abundant, in fact, each material towel rack has its own advantages and disadvantages. What is the best material for the towel rack I introduced to you above? As well as the selection method of towel rack, I hope it can help you in your purchase.

What are the aspects to compare when buying a towel rack.

1. How to compare the purchase of towel racks - compare the process.

As people's needs become more and more diversified, there are also a variety of towel rack designs on the market, and the color is also colorful in terms of Yanjizhou, and it is no longer just golden space aluminum in terms of technology, but also antique, old, brushed, baking paint and other processes.

Second, how to compare the purchase of towel racks - compare the use.

Towel racks also need to be maintained and cleaned regularly, not the best towel racks do not need to be taken care of, first of all, the bathroom environment should be kept dry and ventilated, the surface of the water stains should be wiped frequently, and the towel rack can not be placed in a humid and unventilated environment for a long time, which is easy to cause rust and deterioration, and should be maintained twice a month.

3. How to compare the purchase of towel racks - compare the materials.

The commonly used materials of towel racks are mainly stainless steel, copper, aluminum alloy, iron, plastic, etc., and the towel rack made of stainless steel is not easy to rust, and the surface stability is strong, and it is also commonly used. Plastic towel racks are not as long as other materials in the shroud, but plastic can be processed into a variety of colors and shapes, which is suitable for users who do not use it for a long time.

With the continuous improvement of everyone's living standards, many people pay more and more attention to home decoration, every family will decorate a shower room, towel racks have become a must-have at home, and towel racks have different materials, the following will be listed for everyone, by the way, talk about towel rack purchase skills.

1. Towel rack.

of the material. 1. Space aluminum: As a new type of material in recent years, it has been favored by many people, especially young people, with its high cost performance, stable material color, surface does not peel, no rust, environmental protection and other advantages to win a very good reputation, including door lock hardware, bathroom hardware, cabinet hardware, furniture hardware products have been launched in a short period of time, and its color is suitable for modern, pastoral, simple and other styles of decoration.

2. Zinc alloy: as an earlier rock line material on the market, it appears in the door lock hardware, because its material can be made in many colors, a variety of styles, and there are more choices in terms of style to win a wide range of markets, its biggest weakness is that the material is relatively brittle, and it will be a little rusty for a long time.

3. Stainless steel towel rack: The stainless steel towel bar is characterized by insufficient structure and low cost.

4. Copper: The biggest advantage of copper towel rack is that it has strong stability, high density, heavy weight, and does not peel off or fade after electroplating and polishing. As the raw material market continues to climb, ** is also high. And copper will grow patina if left in a humid place for a long time.

Second, towel rack purchase skills.

1. Don't be misled by those unscientific means: now many businesses use very exaggerated publicity methods in order to increase the selling point of their products, and there are phenomena such as saying that aluminum alloy is space aluminum.

2. Choose a practical structure: the structure of the bathroom towel rack on the market has a single and double-layer, a multi-rod, a closed multi-end closed multi-end closed type, a fixed spacing movable type, a hook type suction cup type screw fixed type, etc., one end of the closed type is more convenient than the two ends of the closed type in the hanging type, the installation of the suction cup type is cheaper, but it is easy to fall off, and the fixed type should be determined according to the towel rack material and the situation of the wall, so you must carefully choose the practical structure when choosing.

3. **: According to common sense, different materials, structure, processing technology and innovative design are the decisive factors, because this kind of products rarely have a value preservation function, so it is recommended that users consider more from the practical and aesthetic aspects.

Although the towel rack is a small piece of bathroom decoration, but it can not be ignored, the common material of the towel rack sorted out on it, you can pick it when you buy, in addition to the material, you can also refer to the above purchase skills.