Where is the channel steel layer of a 31 story house generally located? How to avoid the channel lay

Most often, the channel steel layer.

Generally, the floor begins to be cantilevered at the position of the top plate of the third floor, and it is generally picked every six floors, and the first floor is the landing price.

Seven floors and thirteen floors are cantilevered. The high-rise channel steel is generally 3 layers, 3 + 7 = 10 layers, 10 + 7 = 17 layers, 17 + 7 = 24 layers, 24 + 7 = 31 floors, etc., so if it is a 34-story house, then the channel steel layer is generally set in 3 floors, 10 floors, 17 floors, 24 floors, 31 floors, etc.

When choosing a floor, it is not recommended to choose the following floors:

1. Don't choose the first layer.

Because in high-rise residential buildings.

In the community, the first floor is the most uneasy floor. Because it is relatively close to the ground, it is more affected by the environment, such as rain, noise, insects, etc. Therefore, the living comfort will be relatively low.

2. Don't choose the top layer.

At present, in high-rise residences, the top floor is generally equipped with a top floor garden, so as to cool and insulate the residents on the top floor, waterproof and other functions. But because it's cold at a high place.

It is also more affected by the environment, especially storms.

The weather, unsettling.

3. Do not select the equipment layer.

High-rise residential buildings must be set up, and air conditioning, water supply and drainage will generally be placed on the equipment floor.

Electrical, elevator machine room and other equipment. As a result, adjacent floors are subject to noise or mechanical vibrations.

In most cases, the selection rule of high-rise residential floors is more than one-third and less than two-thirds of the total number of floors, and the floors in this range are better choices.

1) The lighting is very good, the sunshine time is long, and the vision is very wide, because there will generally be no buildings to block;

2) Secondly, in the event of an accident such as a fire, the floor may be too high.

Increase the difficulty of rescue, and the floors in this range, compared to the higher floors, are still okay.

2. In actual life, it is recommended to choose the floor according to the living habits of yourself and your family, as well as your health. After all, the house is for living, and you don't have to pursue the best floor in other people's mouths, the floor that suits you and can meet your needs is the best floor.

For this layer, there are some buyers who believe that they know it, but many people do not make it clear. So what is a channel steel layer? As the name suggests, it is the steel bar that is laid when building a house.

Its load-bearing capacity is relatively good, and it can play a fixed role when building an outdoor frame, and then these channels will be removed in the later stage, but the wall will leave holes.

So why isn't it recommended to buy it? Because this layer will leave holes after the rebar is removed. Once the developer's waterproofing is not done well, the chances of leakage on the exterior wall will be relatively large. Water leakage is a particularly difficult thing to deal with.

In addition, if you buy a channel steel layer that was built before, there will be rust, and it will affect the firmness of the building over time. You may not have this concern when buying a new house, but when buying a second-hand house with a long life, you should pay special attention to the channel steel layer and try to avoid it.

What are the general layers of channel steel? Generally, it is on the top floor or the middle floor, but you still have to ask the sales staff for details.

There is no fixed floor standard for the channel steel layer, and the position of the channel steel layer is different in different buildings.

The channel steel layer of high-rise buildings is located on the first floor or about the 7th to 8th floor, which is built by many long strips of steel with grooved cross-sections.

The channel steel layer will make a lot of noise when people walk on it, and there will be a certain amount of shaking, which will have a lot of impact on life, and the channel steel stretched out by the channel steel layer of the house will often be corroded by rain, ice and snow, and it will not only affect the appearance of the house for a long time, but also have potential safety hazards.

Channel steel layer of the building.

It is a floor made of steel-type material, which is used as a load-bearing layer of the building, and is also called the basic channel steel. Because the channel steel layer sometimes has a sound, many people will avoid this floor when choosing.

Buying a house is basically off-plan.

When selling real estate, you can directly ask the sales Gu channel steel layer for the specific number of layers. If you buy a capped house, you can go to the house to look at it, the channel steel layer is different from other floors, there will be a circle of holes inside, and the building is more prominent outside, but not all of them are like this, and you still have to ask the sales staff of the building.

Channel layers appear on the 4th, 10th, 16th, 22nd, 28th, and so on

Channel layers occur every 6 layers. The root cause of this type of channel layer is that we are erecting scaffolding.

When the cantilever is done from the 4th floor.

Then, according to the requirements of the channel steel layer erection specification, the height of each erection is not allowed to exceed 20m, so the routine is in accordance with 6 layers. Because the floor height of each floor is basically 3m, and the 6th floor is 18m, so it just happens to meet the specifications. Then from the 4th layer, the channel steel layer appears every 6th layer.

This is also a common practice for many high-level executives.

The channel steel layer of the 33-storey building is generally on the 3rd, 10th, 17th, 24th and 31st floors, because the channel steel layer is generally built every 7 floors.

The channel steel layer is usually located in the basement or the top floor and roof; When the building has a large number of floors (high-rise), the channel steel layer is usually located in a certain layer in the middle of the building. When buying a house, consult the sales department of the developer. The height of the channel steel layer is generally 2 2 meters, and the specific floor is 10 to 20 floors, and the lowest floor height is the channel steel layer.

For floors, channel steel floors are usually on the 3rd, 10th, 17th, 24th and 31st floors.

2. Because the channel steel layer is usually built every 7 layers, the channel steel layer is built by many channel steel, if it is used as a small compartment, there is no problem at all, so you don't have to worry about safety issues.

3. In the process of building a house, people will treat the channel steel properly, such as anti-corrosion treatment and tight wrapping, so we don't need to worry about the corrosion of the channel steel layer.

Where is the channel steel layer of a 31-story house generally located? How to avoid the channel layer?

In most cases, the channel steel layer generally begins to be cantilevered at the position of the top plate of the 3rd floor, and is generally picked every six floors, and the first floor is the seventh and thirteenth floors cantilevered if the landing price is the floor. The high-rise groove is generally 3 layers, 3 + 7 = 10 layers, 10 + 7 = 17 layers, 17 + 7 = 24 layers, 24 + 7 = 31 layers, etc., so if the filial piety leakage fruit is a 34-story house, then the channel steel layer is generally set in 3 layers, 10 layers of training, 17 layers, 24 floors, 31 floors, etc.

The channel steel layer of the 33-storey building is generally on the 3rd, 10th, 17th, 24th and 31st floors, because the channel steel layer is generally built every 7 floors. The channel steel layer of commercial housing is generally in the first layer, and it may have a layer of channel steel layer compartment.