If the latex paint wall at home is dirty, can I paint another layer on it?

Latex paintThe wall cannot avoid the possibility of getting dirty, especially in families with children, because of the naughty nature of children and likes to doodle, it is a disaster for latex paint walls! So if the latex paint wall at home becomes dirty, should you directly brush another layer of latex paint, or is there any other good way?

<> friend said that there was no way for the child to be too naughty to use the wall as a blackboard, and at the same time regretted that in order to save money, he decisively chose the affordable latex paint decoration, and underestimated the child's mischievous ability, and the wall was painted before a year of moving in! I smiled and said to my friend, "It's quite artistic!"

Sometimes I think it's familiar, and I don't look at the switch when I press it, maybe I twist my head to the side to look at something else; Sometimes it will press against the wall. As for the aisleSunny angleWhen children or adults walk by, they will habitually touch it with their hands, and they will leave some traces. But latex paint has a drawback, that is, it is easy to change color and yellowing after a long time, that is, the original reserved latex, and then paint on the brush is not a color, if you want to be clean, you have to brush the whole wall again, this is more troublesome, but also to move the furniture, if you move in, it is not environmentally friendly.

Paint latex paint directly on the original wall. In the case of the original latex paint wall is flat, it can be directly constructed in the form of roller rolling, and there is no need to hire workers at all, you can do it yourself, and remember to do a good job of ground protection before construction. If the wall is damaged or uneven, putty can be used first.

Or plaster is repaired and then coated with latex paint. In the case of the original latex paint wall is flat, it can be directly constructed in the form of roller rolling, and you can do it yourself without hiring workers, remember to do a good job of ground protection. If the wall is damaged or uneven, it can be repaired with putty or plaster before applying latex paint.

It may be that the dirty ones will not be so noticeable or use too wetwith tooDirty rags scrubbing the walls will also cause the dirty area to become larger and larger; There is also a lack of timely use of a feather duster to clean the dust on the surface of the wall, once someone rubs the dust, the dust will adhere to the surface of the latex paint

I don't think this is okay, because directly brushing the latex paint on it is not firmly pasted, it is easy to fall off, and it has to be repaired again in the end, which is very troublesome.

Of course, you can, but you should first polish the original paint surface when painting, otherwise the new paint will easily fall off.

Of course not, if you brush directly on the wall of the old latex paint, it will wrap the dust and some dirty things on the wall in the new wall, and even the color change of the latex paint surface will appear very dirty because of the dust, and the direct brushing will also lead to the adhesion of the latex paint is not strong, and it will lead to a large area of dry cracking and peeling in the later stage, which is very inappropriate.

If the latex paint is dirty, you should shovel off the original one, and then brush a layer on it, because the wall surface that has been brushed with latex paint will be relatively slippery, and if you brush another layer, it may not be so firm.

Personally, I think it is necessary to scrape off and brush another layer at this time, after all, I think that if you don't hang it up again, it is likely that the corresponding effect will not be achieved.

Not at all. Because after all, if you paint a new layer on it, it will make the wall of the home look deeper, so that you have to paint the whole wall, which is a bit more than worth the loss.

No, at this time, you must remove the original paint and then brush it again, so that it will be more compliant.

Of course, you can, this will save a lot of things, and it can also spend a lot less, which can save time.

Of course not, because this latex paint wall is very special, so it should be treated in other ways.

If the latex paint wall at home is dirty, can you directly paint another layer of latex paint? Latex paint wall renovation can not be directly painted with latex paint. If you paint latex paint directly on the old wall, the wall is prone to cracks, empty barrels, and falling off in the later stage.

Not only did it not achieve the desired effect, but it even needed to be re-constructed, so it was necessary to treat the foundation before applying latex paint. Before wall decoration, be sure to shovel the wall, including before the putty layer, before the wallpaper and before the wall decoration, which can prevent the refreshed paint from falling off, and can also reduce the probability of cracks, hollowing and falling off the wall in the later stage, so as not to bring unnecessary trouble to the follow-up work. Old wall renovation must use primer, primer and sealing substrate can resist moisture, not only to better protect the paint, but also to improve the texture and hiding power of the paint.

<> if you don't do a wall primer, the renovated wall is easy to blister and mold, and it is easy to discolor after a long time. If a freshly painted wall is exposed to sunlight for a long time, the color of the wall can easily peel off and turn yellow. And because of the different temperature difference between the inside and outside of the wall, when the temperature of the wall surface drops, the latex paint on the wall is prone to cracks, so it is best to cover the wall with concealment and let the wall dry naturally.

If you don't know the base layer of the wall, it is recommended to refresh the latex paint repeatedly. If there are cracks, peeling, or a little ash on the wall base, it means that the quality of the wall base is not good, if the wall base is not removed, sanded or repaired in this case, and the latex paint is directly brushed, then it is likely to cause the wall to crack just after painting.

Check the condition of the wall foundation, all hollowing, falling off and other local areas must be repaired first, the specific repair method is to remove the lesion wall skin, scrape putty and plaster again, and wait for the material to dry. The repaired place is roughly sanded, and then the overall fine polishing of the wall is carried out, which can not only make the uneven place tidy, but also polish off the original wall dirt and improve the absorption of latex paint on the wall. Finally, the old latex paint wall that has been processed is painted, and what I want to know is that the more latex paint is painted, the better, generally 2-3 times is enough.

If the wall paint is too thick, irregular cracks will also form, affecting the appearance.

If the latex wall at home becomes dirty, it is not possible to directly brush another layer of latex, you need to cut off all the old latex before you can repaint.

I think it is possible, you only need to sandpaper the dirty area, and then you can apply a layer of latex paint, which can make the whole home look new, and it also saves time and effort.

OK. Another layer of latex paint can cover the original dirty area.

Latex paint is one of the commonly used materials for wall decoration, with many advantages such as environmental protection, beauty, cost saving, etc., but after the decoration is stationed for a period of time, no matter how much care and care, the wall is dirty, to solve the wall dirty, first of all, we must follow the simple and difficult treatment method. That is to say, wipe first and then wipe part of the ** wall to repaint the front eraser treatment has not been solved, but if the stain becomes lighter, you can use latex paint to solve it. If you apply it to a small area, you can apply it not with a roller, but with wool, and you can apply it from top to bottom.

Generally, it can be covered by applying 2 to 3 times. In other words, if the wall is dirty, if the seal is not clear through test treatment, it can be solved by applying another layer of latex paint. Obvious stains, another layer of latex paint is useless.

I wouldn't recommend this a few more times. The latex paint is too thick and can be easily peeled later.

When the drum is painted with latex paint, the wall comes off, and you will find that this is more troublesome, and you need to remove the peeling wall, which has become powder, and basically needs to remove most of the peeling wall. So, if this is the case for concern, the old utility sheepskin brush will be slower, but will greatly reduce the likelihood of peeling. In particular, the easy way to deal with walls such as dirty walls, fungus, peeling, etc., is to abandon latex paint and treat them with 3D self-adhesive walls.

The walls of my balcony were blistered, dirty and skinny. Last year, after pasting a 3D wall on the balcony wall of our rural hometown, the effect was very good, and the dirty places could not be seen at all. It seems to have been renovated.

This kind of wall is very sticky, waterproof and stainproof, no matter how bad the wall is, it can be pasted without dust. And there are a lot of designs, most of the sizes are 70 * 77 cm, ranging from a few yuan to 20 30 yuan, and some people will also use this kind of wall sticker as a background wall. If the latex paint wall is dirty, you don't have to apply another layer of latex paint yourself.

Depending on how dirty the wall is, depending on the area, it is decided to have a sanded back or apply a layer of latex paint directly. First of all, check how dirty the walls are, it is normal for dust to fall off the walls. After the renovation of the new house, from the day of occupancy, the new house will begin to be renovated for many years, and in the process of living, it is impossible to live without a little dust, and there are some dirty daily routines on the walls, which can be cleaned up.

The latex paint walls in the house are dirty. There is another possibility. Parents can see at a glance that it is also good for children to hold a pen and write and draw on the wall.

Then, you can tidy it up, wipe the wall with a damp towel, if it is not clean, you can wipe it with a mild detergent with a little dip, or wipe it with fine sandpaper.

No. Because there will be a lot of bacteria after the latex wall is dirty, it must be cleaned up before the latex paint can be brushed, otherwise mildew may occur inside, resulting in a large number of bacteria on the wall, which is easy to cause infection among people at home.

Answer: Yes, the latex paint can be covered directly if you want to change the color, but you need to check whether the latex paint is cracked, peeling, etc., if you need to deal with it first, and then apply the refreshed latex paint, if the latex paint is not a problem, you can directly construct on it.

No, it is not feasible to paint latex paint directly when the wall is dirty. If there is a stain on the wall, it will directly affect the adhesion of the latex paint. This is actually a waste of latex paint.

If the latex paint is strongly brushed, there will only be uneven wall surface and the paint cannot be brushed. Therefore, it is recommended that if you want to brush latex paint, you must do a good job of base treatment.

Yes, this method is the easiest, and it may be more troublesome if you want to change it again, which is relatively simple and does not cost a lot of money.

Summary. Hello dear! If the old wall itself is latex paint, and the overall effect is maintained well, polish it with fine sandpaper and re-brush the latex paint, but if the old wall has peeled or cracked, then you need to remove the wall skin first, and at the same time deal with the base layer, and then scrape the putty twice, and polish the wall with fine sandpaper, and finally repaint the latex paint.

Hello dear! If the old wall itself is latex paint, and the overall effect is maintained well, polish it with fine sandpaper and re-brush the latex paint, but if the old wall has peeled or cracked, then you need to remove the wall skin first, and at the same time deal with the base layer, and then scrape the putty twice, and polish the wall with fine sandpaper, and finally repaint the latex paint.

Do you know that in ordinary life, have you noticed that after living in our house for a long time, the walls do not look so white and new, and there will be some cracks, traces, and aging. In order to make their home look more beautiful, many people will choose to repaint the walls a little, but repainting the old wall will be more complicated and troublesome than the new wall. Before repainting, it is important to understand the extent of damage to the wall and then make a decision on whether to paint simply or completely.

Today, I will explain to you how to paint wall latex paint! How to brush the wall latex paint If the wall has many uneven marks or peeling problems, you must first shovel off the foundation and clean it up. Then apply a layer of cement to distribute it evenly, and then wait for the cement to dry, and then scrape a layer of putty to keep the wall flat.

How to brush the wall latex paint If the original wall has been seriously damaged, it is recommended to directly shovel it and redo it, which will look more beautiful and save money than repairing. The next step is to sand, in the choice of sandpaper to choose a relatively fine one, the traces of fine sandpaper on the wall will be relatively shallow, and it is better to cover it when painting, as a primer, every place should be uniform. After the first brush, it may be a little unsatisfactory, and you need to apply a second coat of paint.

How to paint wall latex paint There may be many people who think that if the old wall is going to be repainted, it is enough to repaint it directly on the surface, but this is not comprehensive. If the original foundation strength is good, then we will be relatively simple to operate, just need to simply brush and repair. As the layer of paint on the surface, in order to reduce the color with the primer, you can add a little more water but not too much, otherwise it will affect his thickness.

hardness and feel, etc. The direction should be consistent during the brushing process to avoid different textures after completion. How to brush wall latex paint Generally speaking, after painting, the wall will dry in about 4 hours, although it has become dry, but it is not hard enough, so it needs to be left for about a week.

If the original wall has been seriously damaged, it is recommended to directly remove it and redo it, which will look more beautiful and save money than repairing.