When decorating, do you install window frames first, or do you do exterior walls first?

When carrying out renovation works, we usually carry out the construction of the exterior wall first, and then install the window frame. This sequence is mainly based on the convenience and efficiency of construction.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

First of all, the construction of the exterior wall usually includes the masonry, plastering, painting and other processes of the wall, which need to be carried out without window frames, so that workers can carry out the construction comprehensively and without dead ends. If the window frame is installed first, it may affect the smooth progress of the wall construction, and may even cause damage to the window frame.

Secondly, the installation of the window frame needs to be carried out after the wall construction is completed, which can ensure that the installation position of the window frame is accurate and the installation effect is ideal. If the window frame is installed first, the position of the window frame may be offset due to the influence of wall construction, which will affect the use of the window.

In the local market, the construction of exterior walls is usually between 100-200 yuan per square meter, while the installation of window frames is between 200-400 yuan per square meter, and the specific construction will vary according to the choice of materials and the difficulty of construction.

Therefore, it is recommended that when decorating, the exterior wall construction should be carried out first, and then the installation of the window frame, which can not only ensure the smooth progress of the construction, but also ensure the ideal decoration effect. At the same time, it is also necessary to reasonably choose the materials of exterior walls and window frames according to their own budget to control the decoration cost.

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

First of all, you must install the window frame (if you are not afraid of the trouble in the later stage, you can also install a full set of windows), and then wrap the window frame with adhesive tape, and it is best to wrap the bottom groove of the window frame tighter! These are simple operations and basic processes. Rainy day.

Water can easily penetrate into the wall, causing wall putty.

Peeling, peeling, mold and other problems. The advantage may be that it can be done at one time, and there is no need to go back to deal with the window frame and wall joints, and the surface effect is very good, but it is difficult to deal with the leakage at the window frame in the later stage. What are the advantages and disadvantages of each?

In fact, there are two types of installed windows: one is a window with a subframe, and the other is a window without a subframe. These two cases are analyzed separately.

<> the pre-installation has not yet used cement mortar.

Before painting the walls, begin to install doors and windows, with fixing pieces or expansion screws.

After fixing, the gap between the door and window and the wall is sprayed with foaming agent.

Then use cement mortar to paint the walls and openings, usually the painted surface will be level with the outer edge of the door and window. As a result, the door and window frames cannot be installed in place before plastering. In order to ensure the construction period target, only a large area of the wall plastering work can be carried out first, the side openings of the doors and windows are reserved, and the window side closing plastering treatment is carried out again after the installation of the door and window frames.

Disadvantages: first do the exterior wall plastering cement, and then install the window frame, which is easy to cause the gap between the window edge and the wall, and the construction requirements for the later waterproof project are higher, and the installation is more troublesome.

The exterior walls must be plastered first, because the "in" and "out" of the window frame on the vertical plane must be based on the finished surface of the plaster. For example, the wall is 240 thick, and the window frame is 100 pressed from the outer wall to the inside, if you don't plaster first, this 100 may not be allowed. Because the thickness of the plasters varies.

As for the installation of doors and windows and batch of ash, all the doors should be installed in place first, and then the batch of ash after the wall is dry, if the wall is not dry, the wall is prone to appear a piece of light yellow patches after the batch of ash, and the white wall is very incongruous. The perimeter of the window opening needs to be plastered so that the square opening can be found. It is beneficial for us to measure the size of window openings and the processing and installation of windows.

It should be done first, because the exterior wall is done first, and then the outer frame of the window is pressed, and if the size is not suitable, it can be replaced in time.

Of course, you have to make the exterior wall first, otherwise the windows you have made will be demolished because the exterior wall will be demolished, and it will not be able to draw more.

Install the window frames first, and then apply the exterior cement. This fills the gaps around the window and prevents water leakage and seepage in the future.

Make the exterior wall first, because the order of installation and decoration is generally to do the exterior wall first, and then install windows and doors, which is a common practice.

If you first plaster the exterior walls with cement and then install the window frames, then the window frames will not be so tight. If you install the outer frame of the window first, and then plaster the exterior wall with cement, the cement of the exterior wall will not be so beautiful due to the limitation of the window, so I think it is better to install the window first, and then plaster the cement. Those who aren't in a hurry to decorate the façade will also install windows before moving in, right!

Of course, I also lived in a windowless house for a while. It is a helplessness with limited conditions. If possible, install windows first, even if it's just for interior decoration.

First of all, install the window frame, when swinging indoors and outdoors, the window frame can fill the gap on the edge of the window with mortar, so that the window frame is stronger on the wall and not easy to leak!

What are the advantages and disadvantages of the order in which windows are installed? The advantages of installing the window frame first and then approving the wall are as follows. Window frames are easier to install. After installation, cement mortar can be used for the gaps in the edges of the windows.

or Styrofoam filling. However, if the exterior wall decoration is not done, the window edges will be more prone to water leakage. When decorating indoors and outdoors, install the window frame first, and then cover the edge of the window frame with mortar at least 5mm, so as to better fix the window frame and achieve the waterproof and leak-proof effect more effectively!

First of all, there are also disadvantages to installing window frames. For example, the packaging is not tight. When the mortar falls on the window frame, it needs to be cleaned, especially on the underground window frame track.

It is more troublesome to clean up the cement mortar after it has solidified. There is always some residue that cannot be washed, which is annoying!

If you approve the walls first and then install the windows, the advantage is that it is easier to clean later, but there are also a lot of disadvantages! Cumbersome installation; The edges of the windows that will be repaired later will have a clear interface with the originally approved walls; Leakage protection at the edge of the window is more difficult to deal with. In addition to being more aesthetically pleasing, the most important thing in our exterior wall decoration is to prevent water ingress and leakage into the wall, so installing the window frame first and then approving the wall is the most basic process.

Even if it stains the windows, it's definitely easier to solve than a water leak.

In the process of home renovation, I think it is still necessary to install the outer frame of the window first, and then apply cement to the exterior wall. In this way, the overall wall structure will not be damaged.

First do the exterior wall plastering cement, to treat the exterior wall well, it is best to keep warm, and then install the window frame, so that the sealing effect can be achieved.

I think it's better to do the exterior wall grinding cement first, and then install the window frame, otherwise it will be very troublesome.

First, the advantages and disadvantages of installing the window frame first.

Second, first do the exterior wall plastering cement, and analyze the specific advantages and disadvantages.

Although we want to be beautiful and make the house better when decorating, the most important thing is to protect the wall to achieve the role of waterproof and leakage-proof. Therefore, it is the most basic process to install the window frame first and then do the exterior wall grinding cement, even if there is a little stain left on the window, it is better than living in the future and leaking.

When decorating, whether to do the exterior wall plastering cement first, or install the window frame first, install the window frame first, and then plaster the advantages of the exterior wall cement: you can fill the gap on the side of the window, or use styrofoam to fill, which can effectively prevent the problem of water leakage and water seepage in the later stage. There will be no big difference between the size of the window opening and the window frame, which is easier to install and will not cause more trouble in the decoration process.

Install the wall first and then paint, because the wall is not painted, it will not be very flat, the advantage may be that it can be done at one time, and there is no need to go back to deal with the window frame and wall joints, the surface looks very good, but it is difficult to deal with the leakage at the window frame in the later stage. However, it is difficult to deal with the leakage at the window frame in the later stage. And in the later stage, there will be no water leakage because of the gap between the window opening and the window frame, so the correct way is to wipe the cement mortar of the exterior wall and window opening first, and then install the window frame, and then do the interior and exterior finishing surface layer.

Install the window frame first, his advantage is that in this way, the gap on the side of the window can be filled, which can prevent the problem of water leakage and water seepage in the later stage, and is easy to install, the disadvantage is that it is easy to make the cement mortar fall into the window frame, so it is very difficult to clean the later stage, first do the exterior wall plastering cement, such an advantage is to reduce the trouble of later cleaning, and also have the role of reinforcement and protection for the entire window, and the disadvantage is that it can not play the problem of waterproof and water seepage in the later stage.

The first installation of the window frame can fill the gap, which is conducive to avoiding water leakage, or water seepage, helping to ensure the service life of the window, but it will affect the aesthetics of the window installation.

When decorating rural self-built houses, many people do not know what the construction sequence should be, as the question says, whether to install the window frame first, and then do the interior and exterior wall plastering, or do the interior and exterior wall plastering and then install the window frame. In fact, before the renovation, these construction projects have a more reasonable procedure, let me analyze it with you in general.

The project sequence of window frames and plastering works for rural self-built houses, as well as some simple operation methods.

In the actual construction process, whether it is a rural self-built house or a commercial house, before the exterior wall is plastered, the exterior wall is done well, and the work of punching and punching (that is, we all call cramps) is done, and this process is to ensure that the window frame has a uniform distance from the exterior wall. For example, the indent of the exterior wall surface is 5 cm or 10 cm, so it is necessary to ensure that all the window frames are the same distance, and if the punching bar is not done, the unity of this data cannot be guaranteed.

After the completion of the external wall punching bar, use the punching bar to pull a horizontal line, use this line to determine the vertical plane of the exterior wall and the overall horizontal line, and then you can determine the height of the window frame and the entry and exit position according to this line. After all the window frames have been installed, the window frames are filled with high-grade cement mortar and then the interior and exterior walls can be plastered.

The advantages of installing window frames and then plastering interior and exterior walls in rural self-built houses are in the first place.

The advantage is that the exterior wall is more waterproof.

As the exterior wall of a rural self-built house, the most important question is **? It lies in the waterproof and leak-proof of the exterior wall, and the most likely place to cause water leakage on the exterior wall is left in the window frame. If the window frame is installed after the ash is batched first, there will be construction joints in the later repair, which is very unfavorable for waterproofing, so the biggest advantage of installing the window frame first is that the exterior wall is more waterproof.

In general, the order of plastering and window frames of rural self-built houses must be to install window frames first and then carry out interior and exterior wall plastering work, which can not only save the labor of plastering and repairing window frames, but also can have a better waterproof effect. Therefore, we must pay attention to this issue when decorating.

The decoration of self-built houses should be done first to plaster the interior and exterior walls, and then install large window frames. If you plaster first, you can make the interior and exterior wall decoration more thorough and complete, avoid entertainment dead corners, and you may say that there is some damage to the wall when installing the window, but you can add it later.

For the decoration of self-built houses, the interior and exterior walls should be plastered first, and then the window frames should be installed, so that the overall appearance is better.

I think it would be better to plaster the exterior walls first, so that it doesn't affect the shape of the large window frames, and it is also cleaner.

Plastering first, it is recommended to plaster first. Because the surrounding area will be very dirty when plastering, it is recommended to plaster first.

It is advisable to install windows first. Because if you plaster the exterior wall first and then install the window frame, it is easy to cause damage to the original plastered exterior wall!

Summary. Hello, the best option for installing windows is to install the frame first.

Hello, the best option for installing windows is to install the frame first.

Because if the window sill stone is pasted first, there may be a hollow drum under the water mass pants and mud, which will cause water to come in from under the window sill stone, so that the window has no way to solve the problem caused by this.

If the frame is installed first, there will be no such problem, after installing the window ruler and then laying bricks, there are fine joints can be filled with cement or the blind can be filled with styrofoam or other things, and then paste the Shenxiao window sill stone, and then glue, which is equivalent to three layers of sealing.

So on the whole, it is recommended that you install the frame first, not together.

It means that it is better to install the glass frame together or the frame first.

Install the frame first.

If the window sill stone is pasted first, there may be a hollow drum under the cement, which will cause water to come in from under the window sill stone, so that the window companion will not be able to solve the problem caused by this. If the frame is installed first, there will be no such problem, after installing the window and then laying bricks, there are fine joints can be filled with cement or styrofoam or stuffed with other things, and then paste the window sill stone, and then glue, which is equivalent to three layers of sealing. In addition, the window sill stone is pasted and then the window is installed, it is difficult to hit the expansion screw, it can only be played with a water drill, and it is easy to have a drawback with a water drill, and it is easy to break the window sill stone, and the window sill stone is relatively slippery, for the sake of stability, first install the frame and then paste the brick, press the window frame.

The advantage of first tiling is that the frame can be carefully rolled together to seal the glass, so there is no need for secondary installation.