What are the reasons why old houses often need to be renovated with water and electricity?

Nowadays, as long as the house is renovated, it is willing to carry out water and electricity renovation, especially when decorating the old house. But many people don't know why old houses have to be renovated frequently, and they live well, but hydropower renovation is not only very time-consuming, but also costs money. In fact, the renovation of water and electricity is not only to make living more comfortable, but also to care for and renovate the old house.

And because the construction time of the old house is relatively long, there may be some water and electricity lines are not enough, so you can add some circuits when renovating the water and electricity, so that it will be more convenient to use electricity when you live. <>

And because the layout of the old house is generally uniform when decorating, but after many years, people's living habits may change, and they feel that the layout of the old house may not be suitable. For example, at first, the toilet and sink in the house were facing each other, but after living in the house for many years, it was found that it was inconvenient, so it was necessary to change it to an adjacent one, and at this time it was necessary to carry out water and electricity renovation. Moreover, the water and electricity lines in the old house are buried in the wall, and after years of rain washing and sun exposure, the lines will become very old, and there will be potential safety hazards when in use, so the water and electricity of the old house will often be renovated.

And because the water and electricity lines in old houses are generally relatively old, it is likely that when they are used, they will also be less sensitive, resulting in frequent power outages at home. Because there are a lot of electrical appliances at home now, and there are more times when you usually use electricity, especially in summer, you often have to turn on the air conditioner all day long, at this time, if the circuit is too old, it is easy to not be able to load such a strong workload, it is easy to cause power outages at home. <>

Therefore, it is still very necessary to renovate the water and electricity of the old house, not only to improve the comfort of living, but also to reduce potential safety hazards. After all, many parts of the old house can't be moved, so you can only renovate the water and electricity lines on a regular basis to make the life of the house longer.

Hydropower is very important for a house, the water and electricity of the old house before and the current hydropower method is different, if it is not repaired for a long time, it is particularly easy to cause accidents, we have to use water and electricity every day, so we must transform the water and electricity. Mainly for safety.

Because some of the equipment in the old house is all aging, and the time has passed too long, some circuits have all been differentiated, and the design of the old house is also very unreasonable, not practical at all, and there are often problems, so it is necessary to carry out frequent water and electricity transformation.

Because of the old house, his water and electricity have been aged, so if it needs to be repaired, if it is not repaired, it is very likely that there will be water leakage.

Long use time, poor quality, aging circuit, high failure rate, easy to occur, so because of these reasons, it is necessary to do frequent hydropower transformation.

In fact, when it comes to hydropower retrofits, most users retain the water circuits that developers are equipped with. On the other hand, the quality of the water and electricity pipelines equipped by the developers is basically up to standard (especially **), and even better than the products purchased by some users. Changing water and electricity during the decoration of a new house is just a general term for hydropower construction, just like a new house with wall cloth can be called decoration, and no wall cloth can also be called decoration.

The renovation of the new house must be changed to water and electricity because the original developer reached the basic configuration when designing the water and electricity.

The developer's hydropower drawings are the most basic design according to the requirements of the state, which cannot be tailored to each person, and cannot meet the needs of the owners themselves in many places, which leads to the need to do hydropower renovation in the later decoration. Water, generally just a faucet, of course, to be transformed, electricity, the most basic lights and sockets in each room, may not be enough for later use (such as less sockets, switches without duplex, etc.), so it should also be transformed.

It is not easy to decorate once, especially the hidden projects of water circuits, which must be done well, and the circuits reserved by the developer can be used, mainly because of the location, the number of switches and sockets, and the addition of dual control. In the official definition of fully decorated housing, it refers to the delivery of commercial housing that can meet the basic occupancy needs and does not need to be renovated and renovated. In this case, the water and electricity installation in the home can only meet the basic lighting needs.

In summer, when the high temperature is more than 30 degrees, the safe carrying capacity is about the same; Ampacity voltage = 4950W * ampaxing ambient temperature factor, its actual safe current carrying capacity should be 3960W.

For fine decoration or old houses, the sockets are basically not enough, and you don't want to spend money on renovation, at this time, you can consider expanding the socket, so that a socket can become multiple sockets, and easily solve the problem of insufficient sockets, there are two types of such products can be used.

Because the old house has been shelved for too many years, there must be a big problem with water and electricity, so it is necessary to renovate the water and electricity.

Because the water and electricity in the old house are very old, if it is not renovated, there will be a lot of potential safety hazards in the later stage.

Because no one repairs the old house all year round, the water and electricity lines are relatively old, and if it is not renovated, there will be greater hidden dangers.

Now as long as the house is renovated, it needs to be renovated with water and electricity. Why Hydraulic Retrofitting?

Purpose: to increase quantity, improve quality, change the layout (this is very important). There is a predetermined layout when building a house, and there is a high probability that the user will change after moving in.

For example, the original design was that the toilet and washbasin were bathed next to the toilet face to face. According to the actual situation, the toilet and the washbasin are adjacent to each other, and the bath can be taken opposite the toilet. In this case, both the upper and lower pipes and the location of the socket must be moved.

Imagine that no one can live in a house without water or electricity! Hydroelectric power construction is technical and special, and it is also the first step in the renovation project. If it is done well and it is broken, it will directly affect the later use and effect, so the water and electricity transformation cannot be ignored when decorating.

Does the decoration need to be remodeled for water and electricity? You are indeed needed. Let's start with the water and electricity that the developer has booked.

Based on years of construction experience and observation, most of the materials used in the water and electricity ordered by the developer are not standard products, which will seriously affect the service life and safety. The water pipes used by developers have thin walls, poor pressure resistance, and fast aging rate. Water pipes are generally standard gauge mm, mm, mm (see 2ocm, 25 cm diameter pipes), while the water pipes used by developers are only about 2 mm.

In addition, the construction is intricate, criss-crossed, and has slopes. It is difficult to judge the later hardware installation, and the slightest carelessness will detonate the water pipe or wiring. The wires used are also irregular, the handwriting is blurry on the appearance, and the feel is relatively hard.

The standard of copper content of regular wire is relatively soft. Even if KPMG does not contain enough copper, the flame retardancy of the skin will be reduced because the fairyland is not suitable.

Hydropower renovation is based on the construction drawings to determine the location, pay-off construction. It would be difficult to meet the construction drawings if the previously booked hydroelectric power board did not carry out the detachment renovation. There is also a situation where after unplugging the discarded socket cord, you find that the blisters are tanned and you can't see the original color clearly, and if you don't do this kind of wire, the road may be blocked.

To sum up, decorative hydropower renovation is necessary and necessary.

This is mainly for safety considerations, the water and electricity lines of old houses are usually seriously aged, there are potential safety hazards, and the renovation can eliminate some of the existing problems, and at the same time, it can also adapt to the use of some modern household products and improve convenience.

The water and electricity of the old house has potential safety hazards, so it is necessary to carry out hydropower renovation, because the old house has been in disrepair for a long time, then there will definitely be problems with water and electricity, so it is better to renovate it will be safer.

Mainly because the houses are old, and many of the electrical circuits and waterways are in some disrepair and need to be replaced.

Because the materials used for the water and electricity in the old house have been used for a long time, these things are not strong, and only continuous renovation will ensure the safety of the residents.

That's because the route of the house is aging and there is a high risk of being dangerous if it is not remodeled.

Because the water and electricity in old houses are often very old, and after many years, these things have broken down, so they need to be renovated.

The old house needs to be renovated for water and electricity, because the water circuit is somewhat old, and accidents are prone to occur if it is not renovated, resulting in water and power outages, so it needs to be renovated.

Because the water and electricity lines of the old house are relatively old, and the aging waterways may cause safety problems, it is necessary to renovate and renovate them, so it will be safer.

With the development of the economy, the quality of life of many people has steadily improved, and many people will choose to renovate and renovate their old houses in order to improve their living environment. The decoration of the old house is different from the new house, the significant disadvantage of the old house is water leakage and power failure, mainly because of the long time, part of the water pipe will age and lead to water leakage, and the power failure is due to the fact that when the house was built, there were few electrical appliances and the electric capacity was relatively small, so how to do the hydropower transformation in the process of redecoration and renovation of the old house? The following points should be paid attention to when doing hydropower transformation:

Strive for one step in place; The plumbing pipes were all rearranged; Please ask the designer to design the whole; Install distribution boxes and circuit breakers; Pay attention to supervise the process.

Most people don't know much about how to do hydropower transformation, so let's introduce how to do hydropower transformation.

1. Strive for one step:

If the water and electricity renovation of the old house is not done in one step and only a small area of tinkering, then the fundamental problem cannot be completely solved and will affect the future life. The bathroom drainage of the old dust erection house needs to be checked for closed water, not easily changed, and should be re-waterproofed if necessary.

2. All the water and electricity pipes are rearranged:

Most of the circuits of the old house water are aging, so it is necessary to rearrange all the water and electricity pipes during the hydropower transformation, so it is necessary to groove the wall and redraft the new water pipes and electric pipes, for which there will be smashing walls, opening holes, powder walls, etc.

3. Please design the designer as a whole

The decoration style of the old house does not conform to the common electrical appliances of contemporary families, so it is necessary to ask experienced hydropower designers to carry out the overall design, and then modify and improve it according to the actual situation. It must be designed in advance before starting construction, otherwise it will be difficult to change it in the middle of the renovation.

4. Install distribution box and circuit breaker

The old house is generally not installed with a distribution box, it is easy to blow out with a fuse, and now there are more large electrical appliances, so we must configure a new distribution box and circuit breaker when renovating water and electricity, arrange a reasonable wire path, control each room separately, and consider whether the total load of the total meter is enough.

5. Pay attention to supervise the process

It is best to ask a professional to help supervise the construction process of hydropower renovation. High-quality materials should be used for water pipes and wires, waterproof inspection should be done after the installation of water pipes, and cement plastering should be used after the installation of circuit slots to prevent gaps in the later stage.

Through the above introduction, you should know how to do hydropower transformation. How to solve the problem of how to do hydropower transformation. The water and electricity renovation of the old house has been done, which can eliminate the potential safety hazards of electricity, and in addition, it is more in line with the needs of modern life and more comfortable to live in.

You can get it for free

For circuits, I take the method of changing wires. I just changed the wire pipe by adding a few sockets, which is the so-called breakpoint transformation, and replacing all the wires. Here's what I did.

At that time, I also looked at the specific renovation content and renovation situation. If it is a simple renovation and an oiler paints the wall, it is recommended that small changes are better. If the whole house is rearranged and renovated, it can also be completely changed.

It is best to determine the specific decoration plan before carrying out the water and electricity reform.

<> if it is a house that has been renovated in the past ten years, especially if the original road is reasonable and the quality of water and electricity materials is good, it does not need to be replaced, and only needs to add sockets according to the current needs. Check whether the plug position of the later decoration and renovation can be aligned with the upper position to check whether the water pipe is oxidized and whether it needs to be changed in the later stage.

For the renovation of old houses, whether water and electricity need to be renovated, one looks at the age of the house, and the other depends on your renovation needs. If the house is more than 15 years old, it is recommended that the water and electricity should be repaired. If the age of the house is within 10 years, but you want to upgrade the smart home, it is best to change the circuit to zero when renovating, because the wiring of the old house is aging, unreasonable, it is necessary to re-wiring, laying pipes, and the most expensive material is the wire.

It is best to change the water and electricity of the old house, so as not to have problems in the follow-up, solve the hidden problems in one fell swoop, and have no worries about the residential wires for more than 20 years basically do not exceed the square It must be changed and it is best to install water pipes in the place where it is changed at one time, so that in case of problems, it is not troublesome to repair! After the water pipe is installed, remember to let the plumber use the pressure gauge to test whether there is any leakage, a set of processes is completed, and the materials are enough for many years basically do not need to move, and the main gate remembers to install a pipeline that can only be water and electricity buried in. I think that burying it or not should be based on your own specific situation, to be clean, tidy and beautiful, bury the pipeline into the wall, and if you want to facilitate maintenance, you can't bury it.