How to knit a hat? Ask for tutorials. Simple tutorial on knitting hats for beginners

1. Prepare the wool and rod needle, start 36 needles, and let's have a knitting demonstration.

2. Then start to knit the edge of the hat, knit a circle of upper needles, and then a circle of lower needles, and repeat the weaving to the length of the edges.

3. After the brim of the hat is knitted, start to knit the part of the hat body and knit it with a needle.

4. When knitting to one-half of the entire length of the hat, start to collect the needle, every 7 needles. Then close every 6 stitches in the next circle, so that you can see 4 stem threads when you knit a length.

5. Knit it to the top of the hat in this way, and when there are more than ten stitches on the rod needle, leave a section of thread to cut it and then wear it into the coil.

6. Then start to tighten on the reverse side, tie it tightly, and then turn it over and tidy it up, so that the children's hat is knitted.

Tools: rod needle, cotton thread.

The specific steps are as follows:

1. Prepare the rod needle and cotton thread.

2. Take 30 needles to do a knitting demonstration, and knit the upper and lower needles after the needle.

3. Then weave it to the length of the brim of the hat.

4. After the hat is knitted, start to knit the hat body, and knit the needle on the hat body.

5. Knit the cap to the desired length, and then prepare to start knitting the crown.

6. Knitting the top of the hat needs to collect the needle, knit two needles under the needle, and then two needles and one needle, and complete the circle. Do this and weave two loops.

7. There are 10 more needles to weave to the rod needle.

8. Then prepare the yarn head and thread it into the coil.

9. Tighten and tie on the reverse side.

10. Finally, turn it over and tidy it up, so that the hat is knitted.

The simple tutorial for beginners to knit hats is as follows:

1. We prepare rod needles and rod needles and threads, and take 40 needles for demonstration. Specifically, in the process of knitting hats, you must first measure the head circumference and then start up.

2. After the needle is finished, start to knit the brim, knit the brim with the lower needle, and weave it to 3 needles on average with the lower needle. Then continue knitting the needle after the head and tail are connected.

3. After weaving to a length of 1 inch, it is necessary to change the weaving method to weave a needle under the needle and a needle on the needle. Begin to weave the cap.

4. After the cap body is woven to the required length, start to change the stitch method. Knit a circle of needles. Then start reducing the needle. The method of needle reduction is to knit a lower needle and then 2 needles and one needle. Repeat to finish the loop.

5. Next, start to reduce the second circle of the needle, the same as the first circle. One needle, then two needles and one knitting needle.

6. Finally, there are 12 needles on the rod needle, so the thread is broken and the silver celery thread is threaded into the coil. Then tighten and tie it on the reverse side. Note that the broken wire should be left an extra 20 cm. This makes it easier to string.

7. Then Zheng Boliang turned it over and sorted it out, and the hat was completed.

There are more than 10 types and thicknesses of wool, and we will briefly introduce several commonly used yarns.

Extra fine: It is one of the thinnest of the knitted wool, light and soft is its characteristic, and is most suitable for knitting baby and toddler sweaters or crocheting coats worn by women.

Extremely fine: The thickness is equal to 2 of the finest hairs, and it is lightweight, with a variety of colors, and is most suitable for crocheting.

Medium and fine: It is the most commonly used wool variety, whether it is infants, young children, women or men's clothes, it can be woven with this coarse wool, and the woven pattern is delicate and elegant.

Medium coarseness: It is the most commonly used type of woven cold-proof clothing, and the woven clothing is neither too thick nor too thin.

Tall and thick: It is also the best wool for weaving cold clothing.

1 Prepare the yarn and needles. Tie a slipknot and thread the needle in.

2 Then take 62 shots. Dispense on the other 2 needles.

3 Next, start knitting the upper and lower needles. I weave 1 inch in length.

4 Then change the stitch method and start knitting the next stitch. Knitting to the hat takes two-thirds of the length, starting to subtract the needle. Method of reducing jujube needles: knit one needle and then two needles and one needle. Repeat the operation to finish weaving this Capi dismantling circle.

5 Next, knit 2 more circles, then knit another needle, then knit another needle, then 2 needles and one needle. Finish weaving this circle.

6 Then knit 2 more turns of the needle, and then repeat the above method until there are still 12 coils on the needle.

7 Then leave a section of yarn to break off, put the end of the yarn through the coil, and tie it tightly on the reverse side. Then turn it over and tidy it up. So that a simple hat is knitted.

Hats are a kind of hats that are commonly used in cold weather and are suitable for people of all ages. The hat is made of wool and knitted. In the cold season in northern China, many people choose hats to keep warm outdoors, but in other regions, there are also young fashionable people who use fashionable hats as a match for dressing.

The method of knitting hats is as follows:Material preparation: needle, thread.

Operation steps: 1. The first needle of the washboard on the right side is woven in each row, and the first needle on the left is not knitted.

2. After weaving the first group, then pick 14 needles on the side of the needle, and pick one needle in two rows is exactly 45 needles.

3. The second group ends and picks the third group.

4. The end of the third group.

5. After weaving and 6 stitches, it is finished.

It is necessary to prepare rod needles and wool thread for knitting.

1.First of all, we don't prepare the rod needle and wool, and then start to make the needle, first tie the yarn to it in a slipknot, and then put the rod needle into it, and finally wrap the thread with the right hand and put it on the rod needle, so 30 stitches.

2.After the needle is done, the bottom of the circle begins to knit the brim, if the brim is knitted two needles, the next needle is then knitted on the two needles. Finally, weave the brim to the desired length.

3.Now we begin to knit the hat body two, the hat body does not add or subtract remember to use the needle to knit, until the length of the hat is knitted to the required length of the hat to knit the crown, the top of the hat is woven as follows: first knit two needles, then two needles and one needle, after the circle is finished, and then repeat the knitting 2 circles with the same method.

4.Finally, after the top of the hat is closed, there are still 10 needles on the rod needle, and we use the thread to thread the coil and tighten it on the reverse side. After turning it over, we can sew a nice bow on the hat, and finally our hat is finished.

Don't make the wrong stitch during the knitting process.

First of all, start with the method of three needles, from the left needle to the right needle.

The next step is to wrap the thread, which is how to weave the popular Korean knitted hat.

Then knit three more needles, and after picking the needle here, the first needle is finished.

Then the second line of the pattern begins, and like the first row, it is also three needles on the needle, and one needle is picked, but the needle to be picked must have a thread.

Or pick it directly from the left needle to the right needle and circle it again.

A total of four groups of flowers are weaved.

After the four groups of flowers are woven, you can start to weave flat needles, and twenty rows should be woven according to the original plan.

At 14 rows, every 4 stitches and 1 stitch, 16 rows with 2 stitches, and finally tightened with thread.

The definition of knitted hat is a hat woven from wool or animal hair such as rabbit hair and wool, and woven by hand according to a certain weaving method.

If it is hand-knitted, it is a one-foot-long needle made of two or four bamboos, stainless steel and aluminum alloy, and knitted into a hat.

The two ends of the needle are suddenly cut down and are usually knitted with a rod.

In fact, there are many ways to weave hats, and the above is only a small part of them, and the beginning and end of the hat are generally difficult when weaving hats.

The women's woolen hat knitting tutorial is as follows:

1. Start the needle, take the short needle 6 needles by the annular needle method, tighten the coil after tightening the needle, pull out the connection, and complete the first round.

2. The second, third and fourth circles are the same state. Knit long stitches each time and will add them together (i.e. sew two stitches at the place of each braid of the previous circle). Completed the fourth round of 48 stitches. Note: When counting the number of pins, the first pin is not counted. The same applies hereinafter.

3. For each additional needle in the fifth circle, the first two needles and the last two needles are not added, or two needles are not added in the middle, a total of 22 needles are added, and a total of 70 needles are completed.

4. In the sixth circle, add 1 needle every 6 needles, add a total of 10 needles, and complete a total of 80 needles for renting potatoes.

5. The 7th, 7th, 8th, and 9th circles are spaced between needles and 1 needle respectively. The seventh lap added 9 and 89 pins. 98 stitches in the eighth round, repeat 9 times; 8 more on the 9th lap for a total of 106 stitches.

It doesn't matter if you get an extra stitch or two in the middle. The number of needles can be determined based on the size of the head. At this point, the diameter is about 21 centimeters.

6. Knit the 10th and 15th circles, do not increase or decrease the long needle, and the outline of the hat is basically out.

7. Start reducing the needle. Reduce the total number of needles to around 96 needles. Stitch in two steps depending on the size of your head. Lap 16: The long needle in the middle of the knitting.

8. Take turns to start knitting short needles. This bend is cut with 1 stitch every 16 stitches, for a total of 6 stitches.

9. The last step: weave 2 or 4 short needles again, break the thread, and the hat is completed.