The bottom of the toilet is leaking, it is clean water, where is the leakage, how to fix it?

The bottom of the toilet leaks water, generally speaking, it is the leakage of the metal hose and the toilet connection, the main reason is that the metal hose bursts and then the metal hose and the toilet connection leakage, so it is necessary to replace the metal hose in time. This is that if there is a leak in the place where the metal hose is connected to the toilet, it will need to be glued with some glass glue, if it is too little and too thin, there will be gaps in long-term use. Therefore, in the case of a joint, it takes 24-48 hours and do not use the toilet.

The bottom leakage was caused by the fact that the pit spacing hole was not repaired during the previous production. The toilet bowl needs to be reinstalled and resealed. If there is a problem with the water inlet group and the water outlet group of the toilet, you need to open the water tank and see that the water tank is overflowing, and the water flowing out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water inlet, the water outlet group is broken.

If the water tank is leaking, you can take off the drain core and clean the scale.

Toilet maintenance: 1. Do not place in direct sunlight, near direct heat sources or exposed to oil smoke, otherwise it will cause discoloration.

2. Do not place hard objects and heavy objects, such as water tank covers, flower pots, buckets, pots, etc., otherwise it will scratch the surface or cause cracking.

3. The cover plate and seat ring should be cleaned with a soft cloth, and strong acid, strong carbon and decontamination powder should not be used to clean with volatilizers, thinners or other chemicals, otherwise the surface will be corroded. Do not use sharp objects such as wire brushes and blades for cleaning.

4. When the cover plate is installed in the no water tank and low water tank, people should not lean back, otherwise it will cause breaking.

5. The cover plate should be opened and closed lightly to avoid direct collision with the water tank and leave marks and affect the appearance; may cause breakage.

6. Pay attention to the products using metal seat hinges (metal screws), and do not let acidic and alkaline solvents adhere to the products, otherwise it is easy to rust.

The bottom of the toilet is leaking, don't be in a hurry, you should carefully check the cause of the leak. Deal with it accordingly. Once you know the cause of the leak at the bottom of the toilet, you can prevent and repair it in a targeted manner.

The owner friend can completely solve the problem by doing it himself. First of all, the owner friend should check whether the installation position of the parts in the tank is accurate, and if there is a loose place, it should be reinforced to make it tight. Glass glue is a more rational tool for closing the gap of the toilet, whether it is on the part where the toilet is connected to the water tank, or in other places that need to be sealed, it can be used.

When sealing the toilet bowl with glass glue, it is best to open the main valve of the faucet first to avoid discovering water leakage.

Causes and solutions:

1. There is a crack at the bottom of the toilet bowl caused by the toilet leakage, which is mainly caused by the poor quality of the toilet, and even the crack occurs when the toilet is fired, and the water leaks out along the crack when it is used.

2. The sealing ring at the bottom of the toilet is not tightly sealed during installation, and the sewage outlet at the bottom of the toilet is not aligned with the toilet diameter when the toilet is installed, resulting in the toilet draining or sewage discharge, and the liquid is easier to overflow from the connected place.

3. The toilet and the ground are generally bonded with glass glue, if the lack of rent glass glue is too little or the bonding is too thin, in the accumulated use, it is easy to appear between the glass glue and the toilet or the ground, in this case, you can see whether there is an obvious gap between the glass glue and the ground, if so, you can remove the existing glass glue, and then buy the relevant glass glue for re-bonding, under normal circumstances, try not to use the toilet 24-48 hours after smearing.

The toilet is a product with high frequency of use, and many families only have one toilet, if there is a problem that can not be used, it will greatly affect the quality of daily life, so as such an important household object, it is necessary to understand the knowledge about toilet maintenance. So today, I will mainly share the causes and maintenance plans of the bottom of the toilet, and then let's find out together!

Causes of leaking water at the bottom of the toilet.

There are many reasons for the bottom of the toilet to leak, so if you encounter this situation at home, you must first check the specific problem to make the bottom of the toilet leak. What are the causes of leakage at the bottom of the toilet? The details are as follows:

1. Leakage of toilet tank;

2. The toilet is blocked;

3. The internal parts of the water tank are aging;

4. Water leakage at the connection between the toilet and the sewer pipe;

5. Cracks appear in the toilet bowl itself;

6. There is a problem with the water inlet group or outlet group of the toilet.

How to repair a leaky toilet.

1. The toilet bowl usually purchased from the brand store generally has a gasket sealing ring inside, and in this case, it will be filled with glass glue around the toilet bowl or around the toilet. If the inner sealing ring is broken, if you want to replace the inner sealing ring, you need to prepare a utility knife, adhesive tape, wrench, glass glue and glass glue gun, and you can replace it after removing it and reinstall it again.

2. If the toilet is installed during decoration, the general worker will seal it with white cement, and the tools used to disassemble it are screwdrivers and white cement. First of all, the original white cement is eliminated, and after the repair is completed, then some white cement is re-stirred to seal the bottom of the toilet. When installing, it should be noted that the white cement must not be transferred into the pipeline, otherwise it is easy to block the pipeline.

3. When encountering the aging of the parts of the water tank, then only need to replace the aging parts as soon as possible; If there is a leak in the position where the toilet and the sewer pipe are connected, it means that the toilet is not installed correctly, and it has been reinstalled once, and the toilet connection is sealed; If the toilet is cracked, then it must be replaced with a new toilet, otherwise it will cause water leakage whether it is water coming out or water entering it; If the water tank is leaking, then carefully remove the drain machine first, and then clean the scale inside.

4. If the installation of the water tank and the water parts are correct and sealed, the bottom of the water parts and the junction of the water tank can be closed with glass glue.

Summary. 1. The material texture is poor, the toilet toilet itself is a problem, and the ceramic has cracks. If you find this kind of problem, you can directly find the manufacturer to claim for replacement or complain.

2. For the leakage of the toilet in the back row, it may be that the float in the tank is not buoyant enough. Nowadays, many toilet tanks are small, which can save water, but the buoyancy of the float is not enough, so the float cannot turn off the inlet valve after being submerged, so it leaks. For this type of toilet leakage to change the float, what pressure float to choose can consult the purchase manufacturer.

3. The sealing cover of the drain valve is not tight. This may be caused by the material of the sealing bonnet, which generally does not occur when it is first used, but it will appear as it is used for a long time, and it is necessary to change the sealing cover with a better material, and the production should be excellent. 4. The toilet is not installed properly when it is installed, resulting in the misalignment of the sewage outlet on the ground and the toilet sewage diameter.

In this way, yellow water, water and foul smell will come out. 5. The installation is not professional, the flange is not installed, and the flange has a good fixing and anti-spillage effect. 6. Long-term use causes loosening of the toilet and the ground.

1. The material texture is poor, the toilet toilet itself is a problem, and the ceramic has cracks. If you find this kind of problem, you can directly find the manufacturer to claim for replacement or complain. 2. For the leakage of the toilet in the back row, it may be that the float in the tank is not buoyant enough.

Nowadays, many toilet tanks are small, which can save water, but the buoyancy of the float is not enough, so the float cannot turn off the inlet valve after being submerged, so it leaks. For this type of toilet leakage to change the float, what pressure float to choose can consult the purchase manufacturer. 3. The sealing cover of the drain valve is not tight.

This may be caused by the material of the sealing bonnet, which generally does not occur when it is first used, but it will appear as it is used for a long time, and it is necessary to change the sealing cover with a better material, and the production should be excellent. 4. The toilet is not installed properly when it is installed, resulting in the misalignment of the sewage outlet on the ground and the toilet sewage diameter. In this way, yellow water, water and foul smell will come out.

5. The installation is not professional, the flange is not installed, and the flange has a good fixing and anti-spillage effect. 6. Long-term use causes loosening of the toilet and the ground.

Treatment method, 1. Eliminate external problems, first check that there is no leakage outside, you should disassemble the toilet to check the internal problems, see if the inner wall of the internal toilet is broken, and if there is a rupture, you can directly repair it with sealing glass glue, and check whether the toilet sealing flange ring is installed. 2. Check the flush toilet, and then update the spare parts if the flush toilet has aging problems. 3. If the toilet is loose and the internal sewage outlet is not tightly connected, the toilet can be re-filled with sealant.

The leakage under the toilet bowl is serious, how to repair it?

The installation of the toilet is simple. Sit directly on the floor and seal it with glue and you're good to go. But many friends find that the bottom of the toilet often leaks, what is the reason for this leakage?

For example, now a friend is asking a question like this. What to do if there is a leak under the toilet? How about the substructure of the toilet The first part is the water pipe at the bottom of the toilet.

The drains under the toilet are all ceramic drains. We turned the toilet over and looked at the bottom of the toilet, which has an S-shaped elbow at the bottom and a ceramic pipe that comes out from under the toilet, which is the water pipe of the toilet. The second part is the joint of the toilet outlet pipe.

Generally speaking, toilet drains are rubber seals, and rubber seals play a great role and are important components connecting ceramic water pipes and PVC pipes at the bottom of the toilet. Therefore, the rubber ring must be installed correctly and must be in place.

How to install a toilet The first step is to set the rubber band of the toilet pipe. When we open the toilet box, we can find the water pipe under the toilet bowl and the rubber ring that is available. At this point, we stuffed the rubber lasso into the drain pipe under the toilet, and then tightly connected the rubber ring with the PVC sewer pipe we booked, completing the initial installation of the toilet.

The second step is to fix the toilet. Previously, there were two ways to fix the toilet. The first is to hit the expansion bolt, and the second is to hit the sealant.

At this stage, the installation of toilets at home is mainly based on sealants. After fixing the toilet to the floor, the toilet is basically flat. Then, apply glass adhesive or other special sealant to the area where the bottom of the toilet bowl comes into contact with the floor tiles.

The glue must be glued firmly.

What are the causes of leaking at the bottom of the toiletThe first reason for a leaky bottom of the toilet bowl is also the root cause of a leaky toilet. It's just that the seal is broken. There is a rubber ring sealed between the drain pipe of the toilet and the drain pipe we booked, so if the rubber ring is not properly sealed, there may be a leak in this area.

The water slowly leaked out. The reason why the toilet is not leaking is that the seal of the bottom of the toilet bowl and the floor tiles fails. That is to say, at the root of the toilet, the glass glue we beat has been loosened, at this time, if the water penetrates into the bottom of my toilet bowl and penetrates into the floor through this gelatin part, the lower part of the toilet will be found to be leaking.

The first point is that the sealing ring at the bottom of our toilet bowl must be selected and installed in place. After installing the seal, we can install the toilet in the sewer to prevent the toilet from leaking in the first place. The second point is that the part of the bottom of the toilet that is in contact with the ground must be sealed.

This prevents the toilet from shaking forward. If the toilet is shaken, there will be a gap between the sealing strip and the drain pipe, and water will seep in, so it is also important to make a good glass glue.

Personally, I think that if the leakage under the toilet is serious, it needs to be dismantled again and repaired again.

When some families install toilets, the glass glue used is inferior glass glue, so that the glass glue on the edge of the toilet is prone to aging after a long time.

Solution: Re-apply the glass glue, clean the old glass glue at the bottom edge of the toilet bowl with a blade, and then re-apply the glass glue and wait for 24 hours to use.

First of all, the toilet should be moved up and the waterproof ring under the bottom should be replaced, because the waterproof ring needs to be replaced after a period of time, and if it is not replaced, there will be water leakage.

What is the reason for the leakage at the bottom of the toilet in the bathroom, and how should it be repaired?

1.Jam. If there is a foreign object in the toilet bowl that is clogged and the water is flushed for a long time, the foreign object in the toilet bowl will not be able to get down, so that the bottom of the toilet bowl will overflow.

Countermeasures: The overflow of the toilet bowl is blocked, and the treatment method is to dredge the toilet bowl to make the toilet unobstructed, and at the same time hit glass glue on the edge of the toilet.

2.The installation is not in place.

If the toilet is not properly installed, for example, the toilet flange is not aligned with the drain, so the toilet will overflow when flushing. Solution: Reinstall the toilet, replace the toilet flange, and then apply glass glue to the edge of the toilet.

3.The edge glass glue key is damaged.

When some families install toilets, the glass glue used is inferior glass glue, so that the glass glue on the edge of the toilet bowl is prone to aging and burning for a long time. Countermeasures: Beat the glass glue again, clean the old glass glue on the edge of the toilet bowl with a blade, and then re-apply the glass glue, and wait for 24 hours before use.

4.The flange ring is damaged.

This situation often occurs, many toilet flanges are of poor quality, and it is a common phenomenon for a long time to leak the edge of the toilet, and the leakage of the edge of the toilet is also a common phenomenon in the toilet. Solution: Replace the toilet flange ring and install a new flange ring.

5.Damaged toilet parts.

Sometimes the toilet tank parts are damaged, especially some toilet tanks have been used for a long time, and the toilet tank water float has been used for a long time, and they are basically aging and cannot be used. Solution: Replace the damaged toilet part, which requires you to know which part of the toilet is damaged, and then replace it.