There are two traffic lights at the intersection that are placed vertically together, and what signa

Go straight: stop at the red light, go left at the green light**If there is a special arrow light, you must follow the light indication. If there is a left turn waiting area, go straight at the green light, and when you turn left at the red light, drive into the waiting area, and you can continue to walk after the left turn green light is on.

If there is no special arrow, etc., after the green light is on, the vehicle turning left can make a U-turn without a U-turn sign without affecting the oncoming vehicle, but it is also forbidden to make a U-turn when the left turn is prohibited. It is possible to turn right without a sign prohibiting right turns, without preventing pedestrians from crossing the road.

Paragraph 3 of Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China stipulates that when the red light is on, vehicles turning right can pass without obstructing the passage of vehicles and pedestrians who are released. It should be noted that at intersections with red arrow lights, you cannot turn right when the red arrow light is on.

1. Hello, you should be mainly or fully responsible for the accident. The other vehicle's vehicle is secondarily or not liable.

Legal basis] Article 52, Paragraph 2 of the Regulations for the Implementation of the Road Traffic Safety Law provides that "if a motor vehicle passes through an intersection without traffic signal control and no traffic police command, and there is no traffic sign or marking control, it shall stop and look before entering the intersection, and let the oncoming vehicle on the right road go first".

1. Intersections, including all intersections, such as intersections, T-shaped and other irregular intersections.

2. The state of motor vehicles passing through intersections, including going straight, turning left, and turning right.

3. The oncoming traffic on the right side of the road includes going straight, turning left, and turning right. Because when you see this car, you can't immediately tell if the other person is turning left or right or going straight, and they have to pass near the center point of the intersection. That is, at this time, it is to go straight not only to let the right road go straight, but also to turn left and right.

So not all turns have to give way to going straight!

4. It doesn't matter who hits who hits whom, because let's let is as long as the other party doesn't slow down and may collide.

Second, it is also necessary to pay attention to whether there are slow-down yield signs or markings, stop yield signs or markings in the north-south direction. If there are these signs, markings, then the other vehicle is fully or primarily responsible.

Legal basis] Article 52, Paragraph 1 of the Regulations for the Implementation of the Road Traffic Safety Law: "If a motor vehicle passes through an intersection without traffic signal control and no traffic police command, (1) if there is traffic sign or marking control, let the party that has priority go first;

3. All kinds of concessions.

Signs, markings.

It's all traffic lights.

It means a meaning.

You can choose one to look at.

Right turns are not restricted by a circular red light.

One for you at this intersection and one for you at the intersection on the right.

Summary. Pro, 2 sets of signal lights are set at an intersection in order to observe the signal lights in the aspect of the driver.

Pro, 2 sets of signal lights are set at an intersection in order to observe the signal lights in the aspect of the driver.

According to Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, the motor vehicle signal light and non-motorized quiet vehicle signal light indicates: 1. When the green light is on, the vehicle is allowed to pass, but the turning vehicle shall not obstruct the passage of the straight-going vehicle and pedestrian that is released; 2. When the yellow light is on, vehicles that have crossed the stop line can continue to pass; 3. When the red light is on, vehicles are prohibited from passing. At intersections where non-motor vehicle signal lights and pedestrian crossing signals are not set up, non-motor vehicles and pedestrians shall pass according to the indication of motor vehicle signal lights.

When the red light is on, vehicles turning right can pass without obstructing the passage of vehicles and pedestrians who have been released.

If I can help you, please give a thumbs up<>

The car does not need to look at the lights on the right rear, go to the right front to see the right front is a straight green light, take the left front to see the left front left turn light, take the left rear to see the left front left turn light.

Intersections generally have traffic lights in 4 directions, and the traffic lights in the opposite direction are the same, for example, the longitudinal one is green, then the horizontal one must be a red light. If you are driving, you have to pay attention to the marking lines on the ground, because some traffic lights are relatively thin, you have to turn left, go straight, turn right, which light is on, you can go, but remember that the traffic lights (total signal lights) directly opposite are useful.

It's better if it's a pedestrian, cross the crosswalk, there is a pedestrian traffic light, and the green light goes.

How to look at the traffic light when entering the intersection from one corner of the intersection. Traffic problems. According to your description, you don't need to look at the lights when you go to the right rear of your car, just go straight to the front right and see that the right front is a straight green light.

Take the left front and look at the left front and turn the left light in front of the right. Take the left rear and look at the left front left turn light.

Summary. 1. If you want to turn left at the intersection, you should also look at the type of traffic light when looking at the traffic light, if it is a round light, when there is no left turn light, you need to wait for the green light to go straight before you can turn left.

1. If you want to turn left, you should also look at the type of traffic light when you look at the traffic light, if it is a round light, when there is no left turn light, you need to wait for the green light to turn left.

2. If the traffic light of the road has an arrow light to turn left, you need to wait for the left turn at this time, and you can only turn left when the traffic light of the left turn is green.

3. There is a waiting area for left turns on the road, you need to drive into the waiting area when the green light for straight going is on, and then turn left after the green light for left turn is on.

4. For the behavior of turning left and running a red light, points and fines will also be deducted, mainly by capturing three ** to verify, 5. The front wheels of the vehicle drive through the stop line and press to the induction coil, and the shooting system will capture the rear wheels of the vehicle driving through the stop line and pressing to the induction coil.

<> traffic light is a kind of traffic control facility, which mainly ensures the safety and smoothness of road traffic by controlling the sequence of vehicles with different directions and early disturbances.

Placing traffic lights at intersections has the following main functions:

Ensure road traffic safety: Traffic lights can effectively control the sequence of vehicles and avoid collisions.

Improve traffic flow: Traffic lights can effectively control the speed of vehicles and improve traffic flow.

Improve the efficiency of Zidan road use: Traffic lights can effectively control the passage of vehicles, shorten the waiting time of vehicles at intersections, and improve the efficiency of road use.

Reduce traffic jams: Traffic lights can effectively control the passage of vehicles and avoid traffic jams.

Hopefully, this information will help you understand the role of traffic lights at intersections.

The view of the intersection signal light is as follows:

1. When the red light is on at the intersection, the vehicle (including bicycles, motorcycles, electric vehicles) can not go straight and turn left, the arrow light turns right and the red light does not turn right, and the round screen light turns red and there is no sign prohibiting right turn next to it;

2. When the intersection and the green light are on, pass in the direction indicated, especially the direction pointed by the arrow light;

3. If the traffic light at the intersection is damaged or there is a contradiction in the direction indicated, and the traffic police direct the vehicle on the spot, it is necessary to drive according to the instructions of the traffic police;

4. Pedestrians on zebra crossings at traffic light intersections have the principle of priority passing, even if vehicles can turn right, they must give way to pedestrians;

5. When the yellow light is on, vehicles that have crossed the stop line can continue to pass;

6. The time interval of traffic lights is determined according to the road conditions and traffic flow, 30 seconds for national highways, 10 seconds for urban traffic arteries, 15 seconds for more people at forked intersections, and 10 seconds for fewer people at forked intersections.

1. The traffic lights at intersections in China are red, yellow and green from left to right

2. Traffic lights are composed of red lights, green lights, and yellow lights. A red light means no traffic, a green light means permission to pass, and a yellow light means a warning

3. Traffic lights are divided into: motor vehicle signal lights, non-motor vehicle signal lights, pedestrian crossing signal lights, direction cherry blossom cover slow indication indicator lights (arrow signal lights), lane signal lights, flash warning signal lights, road and railway level intersection muffle signal lights.

The order of traffic lights at intersections from left to right is: red, yellow, green. Traffic lights are internationally unified traffic lights.

A red light is a stop signal, and a green light is a pass signal. At the intersection, cars from several directions gather here, some have to go straight, some have to turn, and who should go first is to obey the traffic light command.

When the red light is on, it is forbidden to go straight or turn left, and if it does not obstruct pedestrians and vehicles, vehicles are allowed to turn rightThe green light is on, allowing the vehicle to go straight or turn;The yellow light is on, and you stop within the intersection stop line or pedestrian crossing line, and you have continued to pass;When the yellow light flashes, warn the vehicle to pay attention to safety.

Generally from left to right: red, yellow, green This kind of horizontal arrangement of lights is rarely used now

Now it's all used from top to bottom: red, yellow, green

Now there are LED signal lights, and the three colors of red, yellow and green are changed sequentially together

The order of the horizontal traffic lights from left to right is, of course, red, yellow, and green.