The carton is always not well sealed, what should I do if I want to burst the box?

This is because there may be too much packaging, or the contents are too heavy to bear, in fact, when the packaging is finished, it should be returned reasonably. Specifications, as well as space inside, reasonable parts, and not too heavy, to match its weight, and then after moving, it should be sealed with glue.

The carton is always not well sealed. What you mean is that if you want to pack something and seal it up, you can choose a larger box, or try to save space when placing it, so that it doesn't burst.

The carton has five catties, ten catties, and the things you want to load must not exceed the amount of the carton, it should be from a little bit of fine, do not have gaps, to press and compact, so that it can be loaded, if there is a gap gap, then the product you are loaded into the five-pound box bulges up and bursts, then it proves that you are in order to be messed up, so it is good to press and compact.

There is a cutter: press the starting end, the starting end is aligned with the center line of the box, do not seal it first, use the tape to pull the tape to the length required to seal the box, and tighten it. After the two sides are glued firmly, the middle line of the hand-pressed box is sealed according to the solid. Rai.

If the customer's delivery time is too short to balance the moisture content of the cardboard, wetting the surface of the cardboard is the most direct and effective way. For example, a layer of water is printed on the surface of the carton through a printing machine, etc.

Because there are more things, it will not be sealed well, you can take out a little bit of things and divide them into several boxes, so that it is easy to seal, you have to have enough patience. If you don't have patience, you will definitely not be able to seal it well, and you will be very anxious.

The main reason for this is that the items are not stacked properly in the process of sorting out the boxes. If you stack the items on top of each other, you can use your knees to hold them up during the sealing process and then seal them with tape.

The carton is not well sealed, most likely because there are too many things inside, and no matter how you seal it, it will burst out. It is recommended to add one, and it will be easy to seal the things separately.

The carton is square, if it is not too much stuff inside, it is generally very easy to seal the box, if you don't get it right, you choose a wider tape, and find another person to cooperate with you, one person to grasp the tuyere this place with his hands, and another person to stick the tape, so that it will be stronger.

Usually the root cause of carton bursting is that the containerboard is too dry and the folding resistance is sharply reduced, so maintaining a reasonable moisture content before the base paper is on the line is the fundamental way to solve the problem of bursting.

Is it because there are more things? That's why it's not good to seal? If that's the case, take a little bit out and divide it into boxes?

This is very good, the box is sealed, or because you are not patient enough, resulting in the carton is not well sealed, then you have to calm down, seal it carefully, I believe that the carton can be sealed.

The upper lid of the carton is not aligned. When the carton is sealed, there will be a misalignment of the middle seam of the upper cover, so that the sealed box is very unsightly. This situation is caused by the guide wheel being too loose, and the user only needs to adjust the guide wheel to complete it.

I think the carton may be not up to the specifications, not according to the requirements of the load, the carton can not be sealed, which will cause the box, if you want not to burst the box should be sealed according to the specifications, so that the box will not burst.

Personally, it is recommended to vacate things a little and divide them into two boxes, the reason why the box will burst is because the things are too crowded to put down, or you can sort things out well and then reseal the box.

This problem is very simple, it may be that the quality of the carton is not good, then change the carton, if the carton is no problem, seal the box with multi-point adhesive paper. This is not a big technical problem, and you can solve it by studying it yourself.

If the carton is not well sealed, it should be sealed several times with wide tape, because if the seal is not good, the goods will fall out during transportation and affect the customer's receipt.

The carton is very windy, take a transparent tape, and then ask the box to be placed on the ground, combine it into a box, and then seal it with tape.

If the carton is not sealed well and the box is going to burst, it is recommended that you can replace it with a relatively large box. This will make it easier to seal the box. Hope mine can help you.

The carton is always not well sealed, it should be the material of the choice of edge banding is not very good, you can choose the general very good pride of this tape for edge banding, this effect is very tight.

The reason why the carton is not good is that the tape is not sticky enough, and the second is that it may contain things beyond the scope of the carton, so it is easy to burst.

The carton is always not well sealed, and it is necessary to burst the incense, probably because there are too many things in the carton The paper cannot carry such heavy things, it may be sealed, and even if it is, it will rot.

The carton is always not well sealed, what should I do if I want to report the box? Since the carton is not well sealed, then you must have too many things, you can change to a larger carton to try, because there is no way, if you can't seal it with tape, that is you have to change the box.

The reason why the carton is not well sealed is that there are too many things in the carton. In this way, the burst area is mended with a paper shell, and then wrapped around it with tape paper, and he will not explode.

Hello, before sealing the carton, first wrap a few loops of tape around the outer ring of the carton. In this way, there will be no box explosion when the box is sealed.

There's too much stuff in a cardboard box! If it doesn't work, take it out and put it in the seal, or put the things in the carton well, and seal it in the sealed carton, don't be in a hurry to get it slowly.

If the carton is not always put well, you can wrap a few more tapes with the door, so that the tighter the stick, the less likely it is to burst the box, so that it is safer.

When the carton is sealed, as long as you pull a few more layers of adhesive tape, and pull it twice in the middle with a horizontal one, such a carton is not easy to burst the box.

It can be packed in two boxes, otherwise it will be reluctantly packed inside, in case the box bursts during transportation, it will be even more complete. So the best solution: in separate boxes.

If the carton is not well sealed, it may be that the contents of your contents are too full, it is recommended that you take out the contents a little, or seal it a little better. so as not to burst the box.

It may be caused by dry weather, and the carton should also maintain a certain moisture humidity to ensure that it does not crack. If it's too wet, it's soft. Too dry and it bursts. There are standards for moisture.

If you don't want to throw away the oversized cardboard box at home, you can tear off the tape on the surface of the cardboard box, then fold it and put it under the bed or behind the wardrobe.

I recently moved to a new house and bought some large household appliances such as washing machines, refrigerators, televisions, etc.

These appliances are already in use, butHow to dispose of these large cartons is a bit troublesome.

DirectlyIt takes up a bit of space in the house, and it's a pity to throw it away。Because I am renting a house, I will definitely have to move later, and if these appliances are not packed in cartons, it will be more troublesome to move.

Just as I was thinking about what to do, my wife told meYou can tear off the tape on the carton, so that the carton can be folded into a flat surface, and the carton can be placed vertically on the wall or behind the door, without occupying the area. Bu Que

I folded the cartons into a flat surface according to what my wife said earlier, and then put them under the bed, which was really convenient and did not take up space in the house.

If you want to use it in the future, take out the carton and reattach the tape, fold it and install these appliances.

So I think you can also fold these cartons into a flat surface and put them in an inconspicuous place. Store it in this way, and you can take it out again when you want to use it in the future.

(1) One-sided explosion box (most of the residual glue is left on one side, and there is only a small amount of glue or no glue on the other side) 1. The water repellency of the carton is too high, or it contains heavy ink and laminating materials and other difficult-to-stick materials 2The surface of the carton is damp and contains moisture.

3.The glue temperature is too low.

4.The glue is not open long enough.

5.The press is not in place.

2) Double-sided explosion box (both sides are glue residue, and the glue body is damaged) 1The glue does not cure fast enough.

2.Too much glue.

3.The glue temperature is too high.

4.The carton tension becomes larger or the size is different.

Hangzhou Banglin hot melt adhesive is widely used in carton sealing and sealing industry, and the products are very comprehensive, reasonable and stable in performance.