Does a fast turn in a car hurt a car

Yes. If you kill the steering wheel to turn, it will hurt the power steering system of the car, and if it is a front-wheel drive car, the half-shaft cage will also be damaged to a certain extent. But many people feel that there is nothing wrong with beating the steering wheel of a car to turn around.

Precautions. If the number of times is small, there will be no problem in a short period of time, but if the steering wheel is often killed for a long time to turn, then it will seriously hurt the electronic power assist system, after all, the steering of many cars is now electronic power assist and power booster pump, the car in the case of killing the direction, the power pump has been working, in the case of the car killing the direction for a long time, the power pump is easy to have problems.

When the steering wheel is hit, especially when the angle of force is large, the relief valve will gradually close, and when the steering wheel is killed, the oil output of the directional power pump flow valve will increase with the increase of the throttle. At this time, the relief valve will be closed, and the pressure cannot be relieved because the power is too high, and the consequence of this operation is that the horizontal pull may break, or the booster pump may be damaged, or the belt will slip.

The big car is using hydraulic power direction, here the traffic police said or fly to remind everyone: usually drive the steering wheel as much as possible not to die, even if you really need to kill then try to return a little, when parking to the steering wheel back to the right, some friends usually do not pay attention to these details when driving, sometimes it may cause unnecessary mechanical failure, or lead to early wear and tear of steering system parts, we still have good habits.

This effect is there, causing the steering power offset, and it will also cause the vehicle chassis to be unstable and roll over!

The rapid turning of this motor vehicle will not have any obvious damage to the vehicle, but the tire wear of the vehicle will be greater, but the main reason is that I don't know that this operation is relatively poor safety performance, because it is likely to hit people, and it has a large blind spot when turning.

If the turning speed is too fast, it will definitely have a greater impact on the shock absorption on one side, and a rollover will occur. In addition, the wear and tear on the tires is large.

Hello, there is no obvious damage to the car, the main thing is that the tire wear will be terrible, be careful not to roll over.

Hello, this is definitely not good, it is easy to cause the chassis suspension tire to go wrong and turn slowly, and the emergency must be an emergency turn.

The rapid turning of the car has a certain amount of wear and tear on the tires of the car, which is relatively poor for driving safety.

There is a certain pressure on the tire, the wear is relatively fast, and there is no problem in other aspects.

If you turn quickly, the tire is generally more worn, and the second is that it is easy to cause rollover.

No obvious damage to the vehicle will exacerbate tire wear and may lead to danger.

There is a certain amount of damage to the suspension, which is still a trivial matter, and the point is that it is too dangerous.

There is not much damage to the car, mainly because the friction of the tires is relatively large, and the safety risk is too great.

Hello, there is still a certain impact on the suspension, and it is easy to wear out in advance due to excessive force.

If the speed is too fast, it will have a certain impact on suspension and shock absorption.

Hello! This one will definitely be prone to damage to the tires and suspension

If the car is equipped with an ESP system, it will have no effect on the car.

If the vehicle is too fast, it is easy to roll over, and there is some damage to the suspension of the vehicle!

Affect the site and suspension system! It is advisable to slow down.

When the car turns, it must slow down in advance. When turning, be sure to look in the rearview mirror, judge that there is no one behind the car or behind the side, and then turn. This point is often overlooked by many novices and can easily lead to travel accidents.

When cornering, the adjustment of the steering wheel is very important. If you want to make a small turn, you need to kill the Hongcha steering wheel as much as possible, and then slowly return to the right direction after turning. If you want to make a big turn, you need to take the direction slowly.

Pay attention around corners. Novices often look at the corners without looking, looking at the left without looking at the right, which affects the neglect of corners, and corners, and is easy to press on the cornerstone of the road or scratch.

When turning left, the driver needs to turn the signal in advance, and try to lean towards the center of the road when turning, so as to provide convenience for the rear car and the right-turning car; When turning right, also use the turn signal first and turn slowly. At the same time, when turning, pay attention to the relationship between the inner wheel difference to avoid the right rear wheel rubbing against pedestrians and obstacles outside the exit.

Also, when turning the steering wheel, keep your hands in the "9:15" position and don't raise your hands. It can run 180 degrees to the sides, and such a steering range is enough in most cases.

In rare cases, such as making a U-turn on a winding road, or parking in a garage, this reaction can be repeated alternately with both hands, called "full wheel".

When turning in dense fog and sandy days, drivers turn when driving in this weather, it is necessary to know which fiber needs to know which fiber needs to be aware of the need to turn on the headlights and anti-fog lights as soon as possible, and honk the horn frequently, so as to cause pedestrians and other cars to pay attention, move forward slowly, and be ready to brake and stop at any time, so as to avoid the occurrence of a sudden accident.

Millions of car purchase subsidies.

For the behavior of killing the steering wheel and turning in place, many friends feel that there is no problem in doing so, because the direction of a car itself is used for turning, and in some areas, there is no way to drive these paths except for killing the steering wheel and turning. Because many people think that the steering wheel of a car will not have any problems in the case of death, they choose to kill the steering wheel to operate even in some cases where it is not necessary to kill the steering wheel. However, for the steering system mechanism of the car, killing the steering wheel has a lot of damage, because the direction of the car has a power assist function, and some cars are electronic power assist systems.

Some car owners have found that if they often kill the steering wheel to use, after a long time, they feel that there are some problems with the steering of the car. In fact, it is true that if a car often kills the steering wheel to turn the operation, it will cause great damage to the car, if the number of times is small, it will not find any problems in a short time, but if the steering wheel is often killed for a long time to turn, then it will seriously damage the electronic power assist systemAfter all, the steering of many cars is now electronic power assist and power booster pump, the car in the case of killing the direction, the power pump is always working, in the case of the car killing the direction for a long time, the power pump is easy to have problems.

The first is the wear and tear of the car tires, some people like to often kill the direction in the same place, in this case, the tires of the car will wear out very quickly.

Some people like to often kill the direction in place, which will make the car's tires wear out very quickly, and will shorten the service life of the tires.

If it is a front-wheel drive car, the half-axle cage will also be damaged to a certain extent, and now the students who are studying for a driver's license will know that the coach will seriously remind them not to kill the direction in place.

There will be no problems in the case of killing, so even in some situations where it is not necessary to kill the steering wheel, choose to kill the steering wheel to operate.

The wear and tear of car tires can seriously damage the electronic power assist system.

Car tires wear out very quickly and shorten the life of the tires.

Even in some situations where it is not necessary to kill the steering wheel, choose to kill the steering wheel to operate.

For the steering system mechanism of the car, there is a lot of damage to the steering wheel, and there are some problems with the steering of the car.

When the car is turning, it should slow down when it comes to the intersection, downshift (down to 2nd gear), and then turn.

When the car is turning, it should slow down when it comes to the intersection, downshift (down to 2nd gear), and then turn.

Generally, in relatively narrow and sharp corners, this method is very correct, and there is no damage to the car.

When the car is about to enter the corner, release the accelerator, brake the band, and press the clutch at the same time, reduce to 2nd gear, because 2nd gear is the safest gear, and then turn.

Note that when turning, you must not release the clutch, you must hold it, and at the same time, you must not let go of the brake, but also gently hold it. After the whole turning process is completed, release the brake first, then slowly release the clutch, and then refuel and run.

There are many problems, over-turning, and too fast can easily cause rollover.

1.Control your speed. Novices must drive slowly, which is one of the most important prerequisites.

Especially when turning, be sure to slow down in advance, only slower to pass safely, or turn wrong can be corrected in time. On the other hand, if you turn too fast, you are prone to danger. 2.

When turning right, make as small a bend as possible. When turning right, sometimes you will encounter a vehicle going straight and will be moving, like an intersection, then you have to turn a small turn, so that it will not affect the normal driving of the straight vehicle, otherwise it will hinder others. 3.

Make a left turn as far as you can. Because some vehicles will also exit on the road you want to turn into, in order to avoid other hazards such as obstruction or collision, you should turn as far away as possible. 4.

Look at the rearview mirror. When turning, be sure to look at the rearview mirror and judge that there is no one behind the car or side before turning. Many novices often fail to take this into account, and it is easy to cause traffic accidents.

5.Watch out for corners. Novices tend to look up and down when turning, and look left and not right, resulting in ignoring the dead corner of the corner, and it is easy to press on the road cornerstone or scratch.

Be sure to keep an eye out for obstacles under the rearview mirror, and if necessary, open the door to take a look before turning. 6.Take control of the steering wheel.

When cornering, the control of the steering wheel is important. If you want to make a small turn, you should beat the steering wheel to death as much as possible, and then slowly return to the right direction after turning the corner; If you want to make a big turn, you need to take the direction slowly.

The car should pay attention to when turning: 1. The speed of the car should be slow when turning, and the rock height of the steering wheel should not be too fast, so as not to cause the car to slide due to excessive centrifugal force; 2. When the car turns, try to avoid using brakes, especially emergency braking, to prevent skidding or accidents; 3. The steering wheel should be adapted to the curvature of the road, and cooperate with the driving speed, so that the steering angle is appropriate, the steering timing is appropriate, and the direction of rotation is timely. When the car turns, it should be according to the road and traffic conditions, 50m to 10m before the curve to send a turning signal, and honk to warn the surrounding vehicles and pedestrians, with the rough shed ruler to appropriately reduce the speed, keep the vehicle stable, slowly turn on the right side of the road, with the steering wheel requirements to match the speed, turn in time, return in advance, after turning the corner, the turn signal should be lifted in time.