How long does graphene floor heating last? How was it in the second year?

Graphene floor heating has a long service life and a high safety factor. It has the same life as a building, up to 50 years, and there is no safety problem at all when it is in use.

The ultra-long life of the same plumbing greatly reduces the trouble caused by the service life of ordinary heating equipment, and saves the rated cost incurred when replacing it twice.

Graphene heating system is very energy-efficient under the correct heating, regulation and use.

Although electric floor heating is heated when used and plays the role of heating and heat preservation, the key point of its energy saving is constant temperature, not off. We only need to set the electric underfloor heating at 10 12 when we go out, and the energy consumption in this state is much smaller than the power consumption of heating the room from 0 to 10.

Of course, if you are away for a long time, you can turn off the thermostat to ensure energy saving and safety. When you return home, first enable the system as you first used it, and then resume your daily use mode when the system is running normally.

The service life of the graphene electric floor heating system is more than 50 years.

The electric heat conversion rate of graphene electric floor heating is as high as more than 99%, that is, 99% of the electricity after electricity is turned on, which is converted into the heat required for heating. And after it is energized, it immediately heats up and heats up.

It only takes about 15 minutes for the wooden floor to penetrate the floor, and it only takes 30 minutes for the cement mortar to penetrate the floor, and the temperature can slowly heat up through the ground to the space. Additional Information:

The radiant heating method of graphene electric floor heating is the same far-infrared rays as sunlight, which can resonate with the human body and be transformed and absorbed by the human body into "life light" that is beneficial to the human body.

When graphene electric floor heating heats up and dissipates heat, the far infrared rays released are as comfortable and warm as the human body basking in the sun, and it has a physiotherapy effect, which can enhance the body's physique, alleviate rheumatism, arthritis and so on in the elderly

I use Papa Bear graphene.

Electric underfloor heating system, introduced is said to have a long service life, heat generation.

The core thermal attenuation rate is extremely low, the life is up to 50 years, and the main body warranty is 5 years. It feels pretty good to use now.

Good raw materials are the premise. Every time I make tofu soup, my wife will prepare the ingredients early: 1 box of lactone tofu, 1 egg, pork, green onions, shiitake mushrooms, coriander, pepper, water starch, salt, and chicken essence.

I've eaten my wife's tofu soup countless times before, and I only know that it tastes delicious, but I've never seen the production process seriously.

That day, while preparing the materials, his wife babbled: The easiest way to make tofu soup is to cut the shiitake mushrooms soaked in water into small cubes; Pork should not be too lean, it should be fat and lean. Cut into small pieces first, then chop them up.

Next, crush the lactone tofu; Beat the eggs into a liquid egg; Starch is mixed with water to make water starch; Finally, chop the green onion and chop the coriander.

After preparing the ingredients, it is time to really enter the production of tofu soup: first heat the pan, then, add a small spoon of salad oil, and then add a small amount of chopped green onions, stir-fry until fragrant; Then, put the minced meat into the pot and stir-fry, and when the oil in the fat is boiled out, you can put the shiitake mushrooms into the pot and fry them together. The wife said that the shiitake mushrooms should be fried some, otherwise there will be astringency.

When stir-frying, you can put some water to simmer for a while. Then, pour an appropriate amount of water into the pot and add the crushed inner fat tofu; Once the heat is boiling, reduce the heat to low and cook for 3 minutes. Next, pour in the egg mixture and cook until the egg mixture is solidified; Then pour in the pre-adjusted water starch, the thickness of the starch depends on personal taste; Finally, add salt, chicken essence, light soy sauce and pepper to taste, and sprinkle with coriander and chopped green onions.

Although my wife is close to the age of sixteen, the kitchen work, whether it is knife work or techniques, is becoming more and more proficient, and she herself has learned some small cooking skills from "Douyin".

For example, when cutting tofu, his wife's knife skills are very distinctive. She picks up the tofu, and instead of cutting it on a cutting board, she spreads it out on her hands, dividing the tofu into three portions and then making a few cuts horizontally and vertically.

The action is like flowing water, handy, and done in one go. Another example: cutting meat, the wife is also particular.

She usually cuts the meat into slices first, then shreds and dices. Cut it like this,

In fact, the life span of graphene floor heating is generally normal, and it will be reduced by about 2% 5% of a service life every year, he said that the amount of electricity used and the heat of storage will slowly decrease over time.

Officially, it can be used for 50 years, but I have only used it for 3 years, and there is no problem, it feels similar to the heating in the first year.

It makes no difference that if the temperature penetrates the ground from the ground, it only takes about 15 minutes for the wooden floor to penetrate and about 30 minutes for the cement mortar, and the temperature can slowly heat up through the ground to the space.

Summary. Hello, the power consumption of graphene floor heating is not high, graphene floor heating not only does not consume electricity, but also has the effect of energy saving. Even if it is turned on all day, when the temperature reaches the set value, it will automatically stop the heating work, and when the temperature is lower than the set value, it will re-enter the heating work, and so on.

Take a 100 house as an example, the average energy consumption is 20W, it is used 24 hours a day, and the electricity consumption is about 48kwh, if the electricity bill is 0 5 yuan kwh, the electricity bill for that day is only 24 yuan, which is cheaper than burning coal.

Does graphene underfloor heating consume a lot of electricity?

Hello Wu is lacking, the power consumption of graphene floor heating is not high, graphene floor heating not only does not consume electricity, but also has the effect of energy saving. Even if it is turned on all day, when the temperature reaches the set value, it will automatically stop the heating work, and when the temperature is lower than the set value, it will re-enter the heating work, and so on. Take a 100 house as an example, the average energy consumption of orange peel is 20W, and it is used 24 hours a day, and the electricity consumption is about 48kwh, if the electricity bill is 0 5 yuan kWh, the electricity bill for that day is only 24 yuan, which is cheaper than burning coal.

122 square meters, the wattage is 14560 power consumption high.

How much electricity is consumed on this day.

Hello, according to the area of your house, the power consumption is not high.

Hello, 14 kWh.

How did you figure it out?

Dear, one kilowatt is equal to one kilowatt of electricity.

14 kilowatt-hours of electricity per hour.

Hello, what is your wattage per hour.

This total wattage is 14,005, and it's not 14 kilowatt-hours of electricity in 1 hour when it's turned on.

Hello, yes, for example, the current power of a Liangtai power consumption cavity burner device Uhner is 2500 watts, that is, its power consumption for one hour is kilowatt hours, that is, one hour of electricity.

How can this be said to be power saving?

Hello, under normal circumstances, graphene underfloor heating is energy-saving.

Graphene underfloor heating is currently advertised on the market as being very energy-efficient and a room can also be started.

Why is there a reason for high energy consumption and high base pin? 1. The insulation measures of the house are related to the reason why you use graphite Fengjianene Qiyou floor heating is very large, whether you are still using sliding windows at home, the power configuration is unreasonable The power configuration is too small, or the power is too large, graphene floor heating has been working to reach the set temperature, but it has not always reached the set temperature. In addition to the lack of thermal insulation of the house and the house, there is also the fact that the heat of the graphene floor heating filling to the room is less than the heat lost in the room, and the room heating is not obvious, which not only wastes electricity, but also fails to achieve a comfortable heating effect.

GrapheneThe service life of the electric underfloor heating system is more than 50 years.

Electrically heated conversion rate of graphene electric underfloor heating.

Up to more than 99%, that is, 99% of the electricity after the power is turned on, is converted into the heat needed for the heating of the trembling bridge. And when it is powered on, it immediately heats up.

Heat up. If the temperature penetrates the ground from the ground, it only takes about 15 minutes for the wooden floor to penetrate up, and the cement mortar.

It only takes 30 minutes, and the temperature can slowly warm up through the ground to the space.

**Can be used for more than 50 years.

1. Uniform and comfortable heat dissipation.

The heating principle of graphene electric heating film floor heating system is radiant heat transfer, compared with air conditioning, heating, etc. through forced convection circulation hot air heating, the dust flow in the air is much smaller, reducing the spread of harmful germs in the air, the indoor environment is more hygienic and clean, the floor heating system also creatively uses the characteristics of human body temperature, and the care from the feet makes you feel more comfortable and makes your home full of warmth.

2. Clean and healthy.

The floor heating system can effectively promote foot blood circulation, thereby improving the blood circulation of the whole body, promoting metabolism, and inhibiting cardiovascular diseases; It is especially suitable for the elderly and children, and has more prevention and treatment effects for patients with arthritis and cold legs. And to a certain extent, improve autoimmunity.

3. Environmental protection and energy saving.

Compared with the traditional convection heating method, the energy saving range of the floor heating system is about 30%, the heat loss of the floor heating in the transmission process is smaller, and the heat is concentrated in the height of the human body, even if the indoor set temperature is lower than the convection heating method 2 5, people can also have the same warm feeling. Floor heating can fully save energy, and will not make any noise, will not raise dust, is a very environmentally friendly and energy-saving product.

4. Beautiful and generous.

After the installation of the whole system, there is no longer an electric heating sheet in the room, which virtually increases the indoor usable area by 2% and 3%, which is not only convenient for decoration and furniture arrangement, but also saves you tens of thousands of yuan per square meter for the house price.

5. Efficient sound insulation.

At present, China's floor slabs are generally prefabricated slabs or cast-in-place slabs, and their sound insulation effect is poor, and walking upstairs affects the downstairs, while the use of graphene electric heating film floor heating increases the insulation layer, which has a very good sound insulation effect, can reduce noise pollution, and there is no noise in the heating process, which is conducive to the physical and mental health of the family.

The service life of electric film floor heating is synchronized with the age of the building, more than 50 years!

Many consumers who have not used electric film underfloor heating subjectively believe that electric film systems are very wasteful of energy. In fact, compared with traditional heating, electric film floor heating systems do not consume as much electricity. The so-called "electric heating film electric floor heating system consumes a lot of energy", which is largely related to the building insulation structure.

When the electric heating film is heated to the required temperature, the system is in full load working state, and the required temperature is slightly different according to the different ground materials, and it is usually directly laid under the composite floor to heat up quickly, reaching 18 about 20 minutes. It is recommended that it is best not to turn on and off the power of the thermostat frequently during the season, and it is more energy-saving to let the thermostat automatically adjust the temperature.

Our electric heating film floor heating design is based on about 100 square meters, 8 hours a day, according to the actual use of the square number of the house, the electricity consumption of a day is about one kilowatt-hour.

In fact, in the actual use process, it will be more energy-saving than this, as long as it meets the energy-saving building standards stipulated by the state, the indoor insulation effect will be better, and the electricity consumption will be greatly reduced. Secondly, in the process of use, it can also achieve energy saving, such as going out for more than three days, the electric floor heating system can be kept in a low temperature operating state, and the room can not be kept in a low temperature operating state, and the consumption of electricity will be greatly reduced.

Question: Graphene floor heating pads, not the kind that paves the ground.

Are people still there? How many more?

JPHEAT Japanese carbon crystal floor heating mat graphene.

Graphene electric carpet of the winter sun.

Xining floor heating mat carbon crystal korean graphene mobile electric heating carpet.

Kono ** graphene floor heating pads.

How's Papa Bear doing?

Papa Bear graphene underfloor heating has eight advantages:[1]

Graphene heating technology, rapid heating, uniform heat conduction, 15 minutes to reach a comfortable temperature. [6]

The electric heat conversion rate is as high as more than 99%, and the energy consumption can also be controlled in different zones and times, which is 30% more energy-saving than the traditional one. [6]

Zero emission, zero pollution, no wind, no dust and no noise, far-infrared light waves can also play a role in health care and physiotherapy. [6]

Less process, high efficiency, no wall holes, 150 pavement area, can be installed within one day. [6]

The thickness of the floor heating layer is <, and the space comfort is particularly good for houses with low floor heights. [6]

Triple wear-resistant, waterproof and leakage-proof protective layer, automatic leakage protection system, automatic temperature protection system. [6]

The thermal attenuation rate of the heating core is extremely low, the service life is as long as 50 years, no maintenance is required, and the main body is guaranteed for 10 years, which is particularly worry-free.

To sum up, Papa Bear graphene mat is better for having children at home, and it is also more acceptable.

The reason why graphene is chosen as the main material, in addition to the above benefits, there is also the advantage of cost, if you can do floor heating at the same time, but also increase the cost a lot, it is also difficult to promote it in the market, it is impossible for all ordinary people to buy, and graphene is to have a low-cost option on the basis of being able to achieve, the first in the market is very cheap, even ordinary consumers can afford it, so, You can rest assured and bold to buy this floor heating that can bring high-quality enjoyment home, so that the men, women and children at home can experience what healthy floor heating is.