The well at home has been digging for a few months, and it is still yellow muddy water when it is pu

Well water contains ferric ions.

Oxidation reaction occurs in contact with oxygen in the air.

When ferric ions are oxidized to ferric ions, the color of water becomes yellow; The second possibility is that the water contains more fine yellow mud, this phenomenon is easy to distinguish, because the yellow mud belongs to suspended solids, the particles are relatively large, and it is easy to precipitate after standing for a while. The third possibility is that the pipes used in the well are iron, and when they are used for a long time, the pipes are oxidized, and the oxides attached to the pipes are brought out when the water is pumped.

with a sedimentation tank. Add alum before use.

The following filtration and other equipment are not done well, digging wells, not only digging holes, but also putting some pebbles, charcoal, etc. underneath for filtration, pumping water with a pump, pumping to a certain time will indeed occur these situations. After more than an hour, the sediment has been pumped away and is naturally clean, but the sediment will still come to the well like water. Try to get a filtration device, and it's best not to pump the water too quickly.

Pump all the water out of the well, and then you can see the water coming back up.

You have to test the water from the well to see if the hydration meets the requirements? In other words, if it's been so long and it's still muddy, then you should continue to go deeper and give it a try.

In this case, you have to be sad, and you have to smoke all day until you draw out the water, because sometimes you haven't done a good morning exercise, so it's like this, just smoke a few more times.

The well at home has been digging for several months, and it is still yellow muddy water when it is pumped up, how can it become clear.

<> hello! Glad to answer for you: Here's how:

Method 1: We can place gravel and carbon at the bottom of the well, so that the impurities in the well water can play a certain role in precipitation and filtration, and the user should carefully understand the comprehensive situation of the well. Method 2:

If there is a source of WU around the well, we need to remove the source of WU or choose another place away from the source of WU to dig the well, if there are no other harmful factors, we need to continue to clean the bottom of the well regularly and replace it with new sand and carbon, we need to pump the well water into the bucket when flushing the well water, and let it stand for a certain period of time to take the supernatant in the barrel after the impurities settle. Method 3: We can also put a small amount of coagulation precipitant to form flocculent sediment in the well water to achieve the purpose of water purification, but in order to ensure the safety of the water quality of the well, it is recommended to send the water quality to the inspection department for testing and then drinking.

The well at home has been digging for a few months, and it is still yellow muddy water when it is pumped up, how can it be cleared?

Placing gravel and carbon at the bottom of the well can play a certain role in precipitation and filtration of impurities in the well water, but if the well has turbidity for a long time, it may be related to the geology and surrounding environmental conditions of the well, such as the soil around the bottom of the well is relatively loose, the soil particles are larger, which affects the filtration effect of groundwater, or the surrounding environment of the well is poor, affecting the quality of groundwater quality, etc., many factors may cause the well water to be turbid, and the user should carefully understand the comprehensive situation of the well. If there are no other harmful factors, it is recommended that in addition to continuing to clean the bottom of the well regularly and replace it with new sand and carbon, when using well water, the well water can be pumped into the barrel, after standing for a certain time, after the impurities are precipitated, the upper supernatant in the barrel can be taken and if necessary, a small amount of coagulation precipitant (such as alum kal(SO4)2??) can be put in12H2O), forming a filial osmotic flocculent sediment to achieve the purpose of water purification (the amount of input needs to be cautious, and long-term excessive intake is not conducive to human health).

In order to ensure the safety of the water quality of the well, it is recommended to send the water quality slippery source to the inspection department for testing, and only after passing the test can it be drunk.

Dear, go down the bridge to let the afternoon be good, I am honored to answer for you: if your newly drilled well is still clear after pumping a few days of water, but it contains fine soil, because in the process of well construction, the underground soil layer is disturbed, and the fine soil particles will be suspended in the water, which affects the color and quality of the water. In this case, you may want to consider using a filter to purify the water.

Common types of filters include sand filters, cartridge filters, activated carbon filters, and more. Different filters are suitable for different water sources and water quality, and you can choose the right filter for installation and use according to your specific situation. At the same time, it is recommended that you regularly clean or replace the filter element to ensure the stability and safety of the water quality sensitive bureau.

Hope mine can help you