How was the clay used to make bricks and tableware excavated?

How was the clay used to make bricks and tableware excavated? The excavator digs down to a depth of 24 meters to get the clay with a moisture content of between 15% and 22%. They can be used to make everything from bricks to tiles to cutlery and even most of the things that are commonly found around you.

The clay is then transported by truck to a building that is not surrounded by walls, so they dry it a little bit.

Clause. First, the master will first inspect the burial chamber to ensure that the clay color is consistent in each pile. After every few carts, they also perform a chemical analysis of the mineral content of the clay in order to use them in different environments.

Next, the master transfers the clay to a rotating mixer, where the blades will chop the clods into smaller pieces, which are then fed into hoppers by a conveyor belt. The clay then passes through a scorching furnace to dry quickly until its moisture content drops below 2%.

Clause. Second, the next step is to polish the clay block into a fine powder. The pulverizer is made up of steel plates that contain many pendulums.

When it starts running and spins, the hammer swings back and forth, grinding the clay blocks into a fine powder. The technicians also perform several tests on the pulverized and purified clay powder. It first uses a hydraulic press to press the clay powder into cake-shaped discs.

The hydraulic press can also show how flexible the clay is. The technician then bakes the clay in the oven overnight and checks that it is the color it is up to.

Clause. Next, the master can pack the clay powder and send it to where they are needed, then add water to the clay powder, and they can turn it into a glaze with excellent performance. Of course, the plant also adds water and chemicals to the clay ahead of time to make the slurry, and keeps them in a constant state of agitation in large mixing tanks to prevent the mud from becoming too viscous.

They can then be transported by tanker truck to where the slurry is needed. At this point, the clay-making process is over.

In fact, it is an excavator or manual excavation, after all, this kind of thing is very precious, if you don't grasp it well, it may lose its value.

The clay that can be used to make bricks and tableware requires a specific ingredient to make it. Generally, after discovering this kind of soil, you can dig it up and go back to make it.

How was the clay used to make bricks and tableware excavated, and the original picture was dug up by the relatively humid river and then processed. It can be made into our cutlery.