If you want to calculate tile parquet, what should you pay attention to?

Updated on home 2024-07-12
11 answers
  1. Anonymous users2024-02-12

    And it has low water absorption. The most commonly used is 800 800, the thickness varies, thick is better than thin. Floor tiles are divided into polished tiles and glazed tiles.

    The most fundamental difference between polished bricks and glazed bricks is the process when they are fired, glazed bricks are coated with a layer of glaze on the bricks and then fired, while polished bricks are polished and then fired, so there are more glazed bricks in the color than polished bricks. But polished tiles are more durable than polished bricks. There are many types of tiles, and they are constantly being updated, if you go to the large building materials market to go around, you will find that you don't want to buy tiles, that is, you can't remember the name of the type of tile.

    Fortunately, there are only a few commonly used in home decoration, and we don't need to spend time and energy to understand the rest.

    For ceramic tiles, I believe everyone will be familiar with them? The application of ceramic tiles in home decoration is still relatively wide, and home decoration does not dare to say that 100% of ceramic tiles are used, at least more than 90% of them will use ceramic tiles, right? That's why the choice of tiles will be taken seriously!

    The choice of ceramic tiles is mainly to see the color and thickness of the bottom embryo, most of the tiles on the market are not Guangdong bricks, it is particularly difficult to buy authentic Guangdong bricks, but the quality of buying brand-name bricks is no problem. The selection of ceramic tiles also depends on the flatness, the color of the bottom embryo is pure white and there is no problem with the production of regular factories, and the rest do not need to be considered too much.

    All-over bricks: The surface of the all-body bricks is not glazed, and the material and color of the front and back are the same, hence the name. The whole brick is more wear-resistant, but its color is not as good as that of glazed brick.

    The classification is divided into non-slip bricks, polished bricks and seepage bricks. The scope of application is widely used in halls, corridors and outdoor walkways and other floors, and is generally less used on walls.

    Looking at the absorption rate, the lower the water absorption rate of the floor tiles, the better, (the water absorption rate of the wall tiles will be higher because it has to be combined with cement). The specific simple method can allow the salesman to pour the tea on the back of the brick and see the speed of water absorption of the tile. If the water absorption is fast, there is an obvious tea watermark after drying the water stains, indicating that the water absorption rate is high, and it is easy to absorb water in the future and cause the brick to mold and expand.

  2. Anonymous users2024-02-11

    The number of tiles should be calculated, and you should also look at what kind of pattern you want to put together, and you should also pay attention to the serial number of the puzzle, otherwise it will be particularly troublesome, these things should be paid attention to.

  3. Anonymous users2024-02-10

    Before the ground parquet paving, the surface of the parquet floor tile should be placed vertically against the wall, and the four corners of each floor tile should be cushioned with foam to prevent the sharp corners of the floor tile from being damaged, and it is forbidden to press heavy objects on the surface of the ground parquet floor tile; Apply high adhesive cement or tile adhesive when paving; When paving, we must ensure that the base surface of each floor tile is free of loose matter and oil stains, and the surface of the floor tile is strong, smooth and clean;

  4. Anonymous users2024-02-09

    First of all, we should pay attention to the effect, it is best to design on some software, and then determine the specific number, in case the number is too large or too small.

  5. Anonymous users2024-02-08

    You have to pay attention to the pattern of this tile parquet, because if the pattern is not good-looking, it will affect the overall beauty, and the quality must be reliable.

  6. Anonymous users2024-02-07

    1. Find the standard point, at the beginning of laying the floor, you must control the flatness of the ground well, if there is an uneven situation, you must stop laying first, and when you readjust the leveling, you must lay it.

    2. Do waterproof treatment, when paving tiles, if the porcelain tiles are replaced, the waterproof layer of the cement mortar under the bottom will be destroyed. Therefore, the waterproofing of the floor must be done well, such as a layer of asphalt waterproof layer before the tile is paved, and the fine seams of the tiles should be patched in the tiles.

  7. Anonymous users2024-02-06

    It is necessary to pave according to some design schemes to achieve the pre-designed effect. It mainly includes the ground area, wall area, draw detailed drawings and indicate the size. Try to buy as many tiles as possible, and do not buy less to make up.

  8. Anonymous users2024-02-05

    When laying parquet floor tiles, it is necessary to understand the points that should be paid attention to to avoid problems. How much do you know about the precautions for floor tile parquet? Now, let pchouse tell you about it.

    1. The most basic point of tile floor parquet is to pave according to the pre-designed scheme, so as to achieve the pre-designed effect.

    2. Before the ground parquet paving, the surface of the parquet floor tiles should be placed vertically against the wall, and the four corners of each floor tile should be cushioned with foam to prevent the sharp corners of the floor tiles from being damaged, and it is forbidden to place heavy objects on the surface of the ground parquet floor tiles.

    3. Apply cement or tile adhesive with high adhesion when paving.

    4. When paving, we must ensure that the base surface of each floor tile is free of loose matter and oil stains, and the surface of the floor tile is firm, smooth and clean.

    5. It is necessary to keep the grassroots level. If the base layer is uneven, it should be leveled with cement first, and the thickness of the whole parquet should be reserved, and the thickness of the binder should be 3-5 mm. It is strictly forbidden to pave directly on uneven substrates.

    6. When paving the parquet floor tiles, it should be wet, and if the whole brick around the ground parquet is dry, it is necessary to pay attention to the size (height) of the parquet base layer first.

    7. Use a zigzag clay board to adjust the thickness and then pave it to keep it flat and free of hollows.

    8. The whole flower can be paved at the same time with the whole brick around it, so as to make the flatness of the flower and the whole brick.

    9. After completing the paving of the ground parquet, it is generally necessary to fine-tune the flatness, at this time, it is necessary to gently beat the middle of the floor tile with a rubber hammer, and then adjust the edge of the floor tile.

  9. Anonymous users2024-02-04

    I believe that everyone knows about floor tiles, which is an indispensable part of our interior decoration now, I believe that everyone understands the basic knowledge of floor tiles, but I believe that some people are still unclear about the knowledge of how to parquet floor tiles. The following will introduce the key points and precautions of floor tile parquet.

    First, the method of floor tile parquet.

    Before looking at the practice of how to parquet floor tiles, we must first understand the practice of conventional floor tiles, when laying floor tiles, we must leave joints to pave, the size of the joints should be determined from the visual aesthetic point of view, when the base layer is treated, all kinds of dirt on the wall should be cleaned up, and watered and moistened one day in advance, the floor tiles must be soaked in clean water for more than two hours before pasting, and the bricks shall not bubble shall prevail, and they should be taken out to dry and set aside.

    Find the standard point, control the flatness of the surface when laying, if it seems to be not straight or straight, then it should be re-laid, and when paving and sticking, it must be cut and matched with a whole brick set, and it is forbidden to paste it with a non-whole brick.

    When the floor tiles are parquet, the paving method is actually similar to the paving method of conventional floor tiles, but there are a few points to pay attention to when laying. It is necessary to pay attention to the protection of parquet bricks, because now the general parquet is mostly cut by waterjet, and the cost and consumption of bricks are relatively large, so carefulness is the most important, and at the same time it is necessary to pay attention to the parquet seam to be uniform, can not be misplaced, and finally find the bottom plate to fix and then the whole board is paved. Second, splicing attention.

    1.Leaving joints for paving, theoretically all bricks should be left joints, but the size of the joints is determined from the visual aesthetics.

    2.When the base layer is treated, all kinds of dirt on the wall should be cleaned up, and watered and moistened one day in advance. If the base layer is a new wall, when the cement mortar is dry, it should be arranged with bricks, elastic lines, and pasted surface bricks.

    3.Before the formal pasting, the standard point must be pasted to control the flatness of the pasting surface, and the flatness should be checked with a ruler at any time during operation.

    4.Before pasting the tiles, they must be soaked in clean water for more than two hours, and the bricks should be taken out to dry and set aside. When pasting, paste from bottom to top, require the mortar to be full, when the ash is lost, it must be removed and re-glued, and it is not allowed to plug the ash from the brick joints and mouths.

    Third, the floor tile parquet **.

    The parquet of floor tiles is affected by many factors, the brand of floor tiles, the quality of floor tiles and the size of floor tiles, and even the parquet of some floor tiles will also affect the quality of floor tiles. And here I will briefly introduce several kinds of parquet flooring** for your reference. First of all, let's take a look at the size of the throwing brick 800*800mm, the ** of such parquet floor tiles is about 300 yuan, and the 1200*1200mm is about 500 yuan.

  10. Anonymous users2024-02-03

    The paving of tiles can be paved by yourself as long as you find skilled workers to pave the parquet you said depends on which kind it is, there is a kind of processed parquet and a finished medicine depends on which one you are talking about

  11. Anonymous users2024-02-02

    This is a good question to ask for a personal answer.

Related questions
9 answers2024-07-12

Knock on it. The left hand is held up from the bottom, and the right hand taps the front, and the sound is clear to indicate high density and good sintering, and the sound is dull to indicate that there are cracks inside. >>>More

14 answers2024-07-12

: You can choose tile caulk according to the color of the tiles in the kitchen, such as Dunlop's caulk series products, there are many colors of tile caulk. White tiles generally choose white tile caulk, dark tiles also have black tile caulk, and transparent tile caulk can be used to make mosaic parquet. >>>More

4 answers2024-07-12

Precautions when buying tiles:

First of all, when buying ceramic tiles, you should pay attention to what material the tile itself is made of, because the tile itself is made of different materials, and the magnetic rotation of different materials is not the same in the specific use process, therefore, in order to make the ceramic tiles you buy can be more durable, there is a better use effect when buying it is best to choose a tile with a better material. >>>More

5 answers2024-07-12

1. Be sure to take photos after choosing the bricks, so as not to make a mistake in the tile shop. >>>More

9 answers2024-07-12

Don't talk too much. One of the things to keep in mind when applying for a job is to avoid rhetoric. You are a job seeker, when you are facing a job opportunity, it is recommended that you master the degree of speaking, especially during the interview, listen carefully to the interviewer's questions, and then carefully organize your language, be organized, and avoid exaggerating when you talk a lot, but do not get to the point, which will make the interviewer very disgusted with you, because you can't hear the point. >>>More