What general color paint is used for cold toning machines?

Open paint: After painting, the original visual beauty and tactile feeling of the substrate are shown as much as possible. It is mostly used for materials with coarse or rich textures, such as: ash, birch, oak, etc.;

Sealer: as opposed to open paint. It can be visible to the underlying substrate or it can be completely covered. The touch of the surface will be the richness of the paint, but there is no feeling of touching the wood;

Clear water paint: After painting, the texture of the substrate can be seen.

Mixed paint: After painting, the texture of the substrate can not be seen, that is, the full coverage, and the surface color is the color of the paint.

Open paint and closed paint are a corresponding term of paint process treatment method.

Clear water paint and mixed water paint are also a corresponding term, most of the time, refers to the type of paint. Sometimes, it can also refer to the painting process.

The above four categories are two taxonomies, so, most of the time, they exist in pairs!

Open paint, detailed points, can also be divided into, full open and semi-open. The external performance lies in the degree of filling of the wood grain!

Most of the time, making clear water paint is better than mixing water paint, and making open paint is better than sealing paint, which has higher requirements for the substrate;

The painting process does not limit the style of the furniture!

Paint is mainly for protection for furniture, followed by decoration. Depending on the style of furniture, different painting processes can be designed to enhance the elements you want to express or highlight the furniture style you want to express.

Briefly write down your personal understanding of paint (wooden furniture), hoping that if you have questions about this issue, it will help.

There are more reds and greens. It doesn't matter what color it is, as long as it's for rust prevention.

The cooling machine insulation cotton can not be painted with paint, if the paint will affect the effect of the insulation cotton.

Anticorrosive Coatings - Material properties.

1. It can be used under harsh conditions, and has a long-term anti-corrosion life, and the heavy anti-corrosion coating can generally be used for more than 10 or 15 years in the chemical atmosphere and marine environment, even in acid, alkali, salt and solvent media, and under certain temperature conditions, it can be used for more than 5 years.

2. Thick film is an important symbol of heavy anticorrosive coatings. Generally, the dry film thickness of anticorrosive coatings is about 100 m or 150 m, while the dry film thickness of heavy anticorrosive coatings is more than 200 m or 300 m, and there are 500 m and 1000 m

According to the American NACE standard [PR-01-76 (1983) revised version of ITEN to evaluate the corrosion resistance of ZS-711 coating, the results successfully passed the test of 4000H salt spray test and 4000H damp heat test. The coating has excellent weather resistance, anti-aging, anti-radiation, abrasion, impact resistance, high temperature resistance (400 600), low temperature (-60), and stable conductivity; Its resistivity can meet the requirements of anti-static and ensure the long life of the coating.

3. Strong adhesion: the coating has strong adhesion to the matrix, the coating composition contains hydroxyl (-OH), the metal matrix provides positive ions, can form chemical bonds, and even realize the combination of covalent chains with the help of the coupling agent in the coating. Under the maintenance of the spatial network structure, the metal, metal oxide nanomaterials and rare earth oxide ultrafine powders contained in the coating composition help the coating form a dense interface transition layer, so that its comprehensive thermodynamic properties match the matrix.

4. Efficient and convenient: easy construction, truly realize the normal temperature self-curing of inorganic coatings, when the ambient temperature is 20, the relative humidity is less than 85%, the surface is dry for 15min, and the dry is 2h, which can ensure high-efficiency construction, and can achieve excellent salt spray resistance and aging resistance. The coating is self-repairing, local scratches caused by external force can still be protected, the coating is not damaged by cutting and welding, and welding with coating does not affect the welding quality.

5. Flexible use method:

Inorganic polymer anticorrosive coatings can be used alone or as anticorrosive low-layer coatings and organic paints, and single-layer inorganic polymer anticorrosive coatings can be used with epoxy, acrylic and polyurethane when used as primers.

Excellent anti-corrosion performance: good adhesion, excellent anti-corrosion performance, long life.

Excellent construction performance: it can be used as a conventional anticorrosive coating, rapid curing at room temperature, easy construction, and can be operated by unskilled people (the main reason why chlorinated rubber heavy anticorrosive coatings can be widely used is this).

Excellent environmental performance: the solid content of traditional solvent-based anticorrosive coatings can only reach 50 60%, while the solid content of high solid weight anticorrosive coatings can reach 70% 80%, or even 90% 100%, and the solvent is reduced by nearly half, showing good environmental performance.

It must be the best to spray a light-colored shell coating, if it is sprayed with a black coating, then the black itself will absorb heat, and there is no benefit to the loss of refrigeration and cold capacity! It is generally sprayed white.

Hello, the factor of color on the outside for a long time is relatively small, and the inside can be insulated and thicker.

White, of course.

Dark color absorbs heat.

Hello! Whether the room is painted in warm or cool tones should depend on the use function of the room. Warm colors should be used in new houses, living rooms, and dining rooms, and cool colors should be used in general bedrooms and studies.

In addition to warmth and coldness, color can also bring to people"Light and heavy"feelings; White and yellow give a lighter feel, while red and black give a heavier feel. In home decoration, the top of the room (ceiling) is easy to choose light colors or brighter tones; The walls and floors can be appropriately weighted, otherwise it will give a top-heavy feeling.

Warm colors look warm, not on the eyes!

Red + Yellow = Orange.

White + Black = Gray.

Lemon yellow + red = pink.

Blue + Red = Purple.

Blue + Yellow = Green.

It can also be called a compound color with more than three tones.

Blue + Yellow = Green.

Red = tan.

Lemon yellow + white = earth yellow"It is.

Composite color white 95%.

Black 4% Blue 1%.

90% silver-gray white

Blue 9% Tartra Yellow 1%.

Sky blue white 94%.

Lemon yellow, 4% blue, 2% apple.

White 85%, iron yellow 10%.

Lemon yellow 5%, cream 75% red

Fuchsia 25% cherry red.

Iron red 50%, medium red, 25% purple red black.

Brown medium yellow 50%.

Blue 35% black 15%.

Dark green in addition to this. You can also add the appropriate amount of white depending on the desired shade of color.

Remember to add a small amount of dark color. Failure to do so will contaminate the color.

The surface of the galvanized steel pipe is relatively smooth, and the adhesion of most of the paint cannot achieve a good effect, and the paint is easy to fall off, and the adhesion is not firm. Galvanized special paint is required to ensure that the paint film does not fall off.

ED1000 epoxy primer is a special paint for galvanized pipes with excellent adhesion. The paint has several advantages: it can be used for galvanized pipes, galvanized sheets, stainless steel, aluminum alloys, metal alloys, etc., with strong adhesion and no falling off of the paint film; The substrate is free of sandblasting and grinding, and the solvent can be used to remove oil stains, saving manpower and material resources; Salt spray resistance for 1000 hours, strong corrosion resistance; It can be matched with a variety of topcoats, and the coating scheme is diversified.

First, the surface of the galvanized steel pipe is scrubbed with solvent to remove oil, dust, etc., and the ED1000 epoxy primer is coated for 1-2 coats and dried within 24 hours. After the primer dries, the topcoat is applied, and the topcoat is selected according to the use environment.

Supporting scheme: (indoor anti-corrosion) ED1000 epoxy primer + polyurethane topcoat epoxy topcoat.

Outdoor anti-corrosion) ED1000 epoxy primer + fluorocarbon paint acrylic polyurethane topcoat.

Cold galvanizing is generally a small tube, and hot-dip galvanizing is a large tube.

Cold galvanizing is much better than hot galvanizing pipes.

Cold galvanized materials can be adhered to with epoxy primers (epoxy zinc-rich and the like). The surface can be sanded, and it is better to wipe off oil slick stains. Generally, it will not fall off for 2-5 years.

Hot-dip galvanized materials should be treated with epoxy zinc yellow primer or other treatment solutions before they can be used as topcoats.

Cleaning the substrate or adding adhesion promoter XYS-1985 series can be improved.