Can bowl lilies not need to be planted in lotus soil during growth? Is it hydroponic only?

Can bowl lilies not need to be planted in lotus soil during growth? Is it hydroponic only?

Bowl lotus can be hydroponic, as long as the substrate is used to stabilize the lotus root and the nutrient solution is carefully cared for, it is possible to hydroponic bowl lotus. However, hydroponic bowl lilies often do not bloom, do not grow well, and are prone to death. Because the roots of the bowl lotus have darkening, they can only carry out normal physiological activities in the dark.

Some flower lovers may think that it is okay to use shading pots to hydroponic bowl lotus, but according to the test, almost all bowl lilies cultivated without soil do not bloom, and it is no problem to watch the leaves.

Bowl lily planting. 1. Seed treatment.

The purchased bowl lotus seeds need to be treated in order to germinate quickly. You only need to use a tool to break a small hole in the round concave side of the bowl lotus seeds. Be careful when doing it to avoid injuring the embryos.

2. Soak in water to sprout.

Soak the treated seeds in warm water and change the water every 2-3 days until the seeds germinate. If the seeds cannot be planted immediately after germination, continue to soak them in room temperature water until they have floating leaves and roots.

3. Transplantation. Prepare an opaque and deep porous porcelain pot, then dig some silt into the pond and put it in the pot with some water, or use fertile clay. Gently remove the lotus from the water and slowly press the roots into the mud.

4. Add water. The transplanted bowl lotus should be added with water to give it enough space to grow, and the amount of water added should not submerge the floating leaves. After adding water, you may sprinkle a layer of beautiful pebbles when the water body becomes less turbid, and then sprinkle another layer after the water body is cleaned.

In this way, the next time you manage the bowl lotus, the water body will not be so easy to become turbid.

When planting bowl lotus, it can survive without soil, but the growth of bowl lotus will be relatively poor.

First of all, if there is no soil, the root system of the bowl lotus can not be fixed, nor can it fully absorb nutrients, it is easy to do not bloom and do not bear fruit, and the difficulty of maintenance is relatively high.

Although there is no soil to survive, the quality of growth is far less good than that of soil, so it is best to use soil for cultivation.

It's not so particular, the most important thing in planting bowl lotus is that it is enough to have water, and it doesn't matter what mud it is. As long as it's not sand. You have to believe that the mud in the pond also comes from the high mountains.

The rain washed down. Therefore, there is no difference between the mud in the pond and the mud in the mountains. It's just that it's sand with a relatively small component.

The range of potted bowl lotus soil is relatively loose, farmland soil, vegetable garden soil, green belt soil, soil in the street park, river pond mud can be, as long as the fertility is not too large, no chemical pollution can be used, there is no need to use river pond mud. The soil used for the bowl lotus is not fixed, we can find some soil to use within our own reach, and it is the most convenient and fast to take local materials!

Generally speaking, river sand or pond mud can be used semi-hydroponics, and twice as much water as soil is the most suitable.

The bowl lotus plant originally needs something to fix, and it needs a lot of nutrients if it wants to bloom, and it can't meet its needs with nutrient solution alone.

Not necessarily, you can use your own vegetable garden soil, the soil is not fertile, you can use bottom fertilizer or top dressing.

Hydroponics is the use of whole water culture.

It is best to use a shallow container for hydroponic bowl lotus, the container must be disinfected before use, and then an appropriate amount of soil should be added to the container to fix the plant, put the bowl lotus into the container and fix it, and then add an appropriate amount of water. In order to ensure that the water is clean during daily maintenance, it is also necessary to let it have sufficient light.

Gardening: Hydroponic tutorial on the planting method of bowl lotus, learn these points to successfully raise bowl lotus.

Soil selection. Bowl lotus requires rich humus pond mud or paddy mud as cultivation soil, and avoid using industrial polluted soil. The viscosity of yellow mud is large, and the amount of use should be appropriate, and excessive stickiness will affect the elongation of the lotus root whip and the expansion of the lotus root; Sandy soil is loose, sticky enough, easy to be damaged by wind, hindering the growth of the root system, generally yellow mud, sandy soil according to 7:

A mix of 3 ratios is appropriate. If there is no sandy soil, yellow sand can be added, but the proportion is slightly smaller. In the suburbs of the city, the garden soil of the vegetable plot can be directly selected; In the city, you can also use the soil of potted flowers in spring and add half of the yellow mud as cultivation soil.

Choice of pots. A suitable size is to ensure that the container diameter is around 25. The depth is around 20. Make sure the soil is deep enough for the roots to grow.

Bowl lotus hydroponics can be without soil, the purpose of the soil is to fix the seeds, avoid the seeds floating on the water surface, affect the survival rate, in hydroponics with pebbles, rain flowers instead of soil, can also fix the seeds, so hydroponic bowl lotus can not use soil, and during the hydroponics to change the water regularly, to avoid plant infection with germs, but also once a month to apply fertilizer to promote the growth of bowl lotus.

Bowl lotus can be hydroponics without soil, the soil is mainly to fix the seeds, avoid the seeds floating on the water surface in the process of cultivation, reduce the survival rate, do not use soil hydroponics process, you can use rain flower stone, pebbles instead of soil, the bowl lotus seeds are fixed, so that they can sprout and grow smoothly.

In the process of hydroponic bowl lotus, the amount of water should be gradually increased with the growth of the leaves until the water surface reaches two-thirds of the hydroponic container, and the bowl lotus should be placed in a sunny environment, so that the plants can receive full sunlight, but when the light is too strong, it is necessary to shade the bowl lotus to avoid sunburn and yellowing of the leaves.

Bowl lotus is suitable for growing in a clean water quality environment, during the hydroponics period, it is necessary to regularly observe the changes in water quality, and replace the water for the bowl lotus in time when the water quality is turbid, so as to avoid the plant being infected with diseases and unable to grow normally, and to apply a fast-acting fertilizer to the bowl lotus once a month to improve the growth rate of the plant.

Bowl lotus and goldfish can be cultivated together, wait for the water level of the pot to reach 10 cm, you can put the goldfish into it, but in the process of breeding, to provide sufficient bait for the goldfish, so as not to gnaw the stems and leaves of the bowl lotus in a hungry state, affecting the growth of the plant.

1. Select the variety.

There are many varieties of bowl lotus, different varieties of morphology, growth habits are not the same, in the hydroponic bowl lotus, you can choose the full and excellent variety seeds in early spring for sowing, usually jade bowl, Manjianghong and other varieties have strong adaptation to the environment, it is easy to take root and germinate in the water.

2. Seed treatment.

The outer skin of the bowl lotus seeds is relatively hard, and it is difficult for new shoots to break through and grow. Place the concave end of the seed on the ground and rub it, or cut it with a knife so that it exposes a small opening, so that the seed can absorb water and small buds grow from there.

3. Soak seeds to promote germination.

Prepare clean water, control the water temperature between 20 and 40, and then soak the seeds of the bowl lotus directly in the water, and change the water once a day in the morning and evening to avoid the turbidity of the water quality affecting the germination of the bowl lotus.

4. Germination management.

When soaking seeds, the ambient temperature should also be controlled between 20 and 30, generally in about 3 5 days the seeds will grow small sprouts, and wait until seven days later the seeds that have not germinated should be taken out, so as not to affect the healthy seed growth after soaking in water and rotting. After that, the water is changed to control the temperature, and in about 2 weeks, it will grow small leaves.

5. Transplanting hydroponics.

Prepare a clean hydroponic container and suitable water quality, you can move it to a clay pot with a space of more than 20cm, stir the water, soil, fertilizer, etc., and after the mud is settled, you can plant the bowl lotus in the middle of the pot, and the seeds should be completely inserted into the mud, so as to fix the position of the bowl lotus.

6. Management work.

When the bowl lotus is hydroponic, it can be placed in the full sun for maintenance, and it needs to be changed every half a month to maintain the quality of the water to make it grow better, and you can also drop a few drops of nutrient solution in an appropriate amount to provide nutrients to the bowl lotus in time.

Bowl lotus is good to look good to raise, add water to live, a small bowl of lotus, cool summer, very good-looking when flowering**, if you like it, buy it yourself and plant it! 1. Container: Hydroponic bowl lotus needs to choose a container with a larger diameter and good air permeability, and the container needs to be cleaned and disinfected.

2. Seed selection: Select the large and full bowl lotus seeds, soak the seeds in warm water, and carry out germination treatment.

3. Planting: After the seeds germinate, add an appropriate amount of silt to the container, plant the seeds into the silt, and then add an appropriate amount of water. You can put a few stones in the silt to avoid muddy water.

Bowl lily is a plant of the water lily family, often referring to the small and medium-sized types of lotus, and the scientific name is the same as that of lotus. The flowering period is from June to September, and the number of days of single flower opening varies according to the variety, with less than 3 or 4 days and more than 10 days.

Bowl lotus is distributed all over China, in Jiangsu, China, with Suzhou produced the most famous. The lotus flowers generally stretch above the water surface and bloom in the air; And the water lily flowers are next to the water. The bowl lily should be repotted once a year, and the water lily should be repotted once every other year before it grows well and blooms more.

If there is a lack of fertilizer, it will take root and grow leaves slowly, and lack vitality. Therefore, a small amount of rotting cake fertilizer or bean bran and peanut bran should be mixed into the potting soil before planting.

Bowl lotus is a plant that can be water-raised, but it can not be water-raised all the time, it is easy to affect its later growth, and the root system of bowl lotus can not be fixed, and its nutrients are also difficult to absorb, and it will only grow vigorously for a short time but will not flower. Generally, it is still necessary to use half-mud and half-water soil for breeding, and fill the pot with 4 5cm thick paddy soil or pond mud, and then add water to maintain, so that the bowl lotus can grow normally and flower.

Bowl lotus should not be raised in water all the time.

Because the bowl lotus likes water, it can also grow vigorously in the water, so many people choose to raise the bowl lotus in water, can the bowl lotus be raised in water all the time, in fact, the short-term water to raise the bowl lotus, will not have any impact on its growth, but has been using water to maintain the bowl lotus, which will lead to its later growth being limited and hinder its health.

Generally, when sowing bowl lotus, most of them choose to grind their seeds out of a small hole, and then soak them in water to wait for them to absorb water and germinate. After that, you can continue to care for the bowl lotus in the water, so that it can grow new roots and grow small leaves, and its seeds will retain the original nutrients to support its growth.

However, just using water to maintain the bowl lotus, first of all, its root system will float on the surface of the water due to the lack of soil to fix, and it can not absorb nutrients from the soil, even if the nutrient solution is added dropwise to supplement the nutrients of the bowl lotus, it can only make the bowl lotus leaves grow vigorously, and it is difficult to produce beautiful flowers.

It is best to transplant the hydroponic bowl lily into a pot mixed with mud and water after it has developed a root system. You can first spread 4 5cm thick pond soil or rice field soil at the bottom of the pot, and then plant the bowl lotus in it, and then add water to maintain, so that its roots can be fixed by the soil and absorb nutrients, so as to grow and bloom healthily.