How to remove a large amount of oil stains on the ground? How to quickly remove oil stains on the ce

1. If the pollution and stain are heavy, dilute it with bioconcrete cleaning agent in the ratio of 1:1 1:2 to prepare a cleaning solution; If the pollution or stain is light, dilute it with water at a ratio of 1:4 to prepare a cleaning solution;

2. Wet permeate oil and water on the ground before cleaning, then spray the concrete with a dilution solution of biological detergent, wait for 20 to 30 minutes, the time may be extended by 1 day in severe cases, and the specific decomposition of biological detergent thoroughly penetrates the lubricating oil decomposition, at the same time, it is necessary to keep the face moist, if necessary, repeat the above process.

Shot blasting machine. The principle is to use mechanical action to remove the pollution of the cement floor surface, expose the new surface, and play a role in renovation.

The use of frosting method to remove the cement floor is often more thorough, especially when the cement floor is renovated, painted and other construction, this method must be used, and the cement floor can often get better results after treatment.

If there is a lot of sand on the ground, if there is a lot of oil stains on the ground, it can't be removed, then at this time, we can make some sand, let the sand absorb it, so that the ground will not be so slippery, if it is a floor tile, then we will make some cotton cloth, the cotton cloth on this floor, this seedling will be on the floor tiles If there are a lot of oil stains on the ground, it can't be removed, then at this timeIf it is a floor tile, then we can make some cotton cloth, and the cotton cloth will be poured on this floor, and the seedling will absorb the oil stains on the top of the floor tile.

Sprinkle a little vinegar on the mop to remove grease from the ground.

It is difficult to remove the oil stain on the cement floor, if you can get some hay and wood ash the night before, mix it into a paste with water, and then evenly spread it on the ground, and then rinse it repeatedly with clean water, the cement floor can be renewed, and the burned honeycomb coal ash is mixed with laundry detergent to wash the ground, and it is easy to remove the oil stain.

Hope solves your problem, hope.

Pour a little vinegar on the mop cloth and you can go to du

Drop the grease on the ground.

zhi。The oil stain on the cement floor is very difficult to remove clean, if you can get the right point of hay and wood ash at night, mix it into a paste with water, and then evenly spread it on the ground, and then rinse it repeatedly with clean water, the cement floor can be renewed, with burned honeycomb coal ash, mixed with washing powder, to wash the ground, it is also easy to remove the oil stain.

Different methods of cleaning oil stains are different:

If it is just dropped on the ground and using vegetable oil, we can use common detergents such as dish soap and laundry detergent to clean it. If the edible vegetable oil that pollutes the cement floor for a long time, we can use caustic soda and special degreasers to clean, and we need to pay attention to prevent burns when cleaning, because these detergents are often strongly alkaline, and we must take protective measures.

For mineral oil dripping on the cement surface, we can use something like sawdust to adsorb a part of the oil stain first, and then use professional oil stain removers such as degreaser and carburetor to remove it. In addition, according to our experience, strong acidic chemicals such as hydrochloric acid have obvious cleaning effects on mineral oil stains, such as general mechanical oil stains in workshops and workshops, but we should pay attention to ventilation and protect ourselves during operation.

Mineral oil usually refers to the ** (or oil) that has been mined and pre-processed, and we commonly use gasoline, kerosene, etc. Mineral oil in industrial use, such as gasoline, diesel, lubricating oil, engine oil, etc., which are commonly used in our factories, are easy to pollute the cement floor.

The ground oil stains are difficult to clean, teach you to make your own cleaning solution, and the cleaning is very simple.

Tips for removing grease from the kitchen floor! No need for a drop of dish soap, convenient and fast! Mopping, cleaning, removing grease, life tips, life tips, life tips, life skills.

There are many ways to remove oil, and generally speaking, the ground oil cleaning agent or caustic soda is used for cleaning. If you ground maintenance as well as rings.

If the environmental requirements are relatively high, it is still recommended to use ground oil cleaner. At present, the floor oil cleaning agents on the market are highly concentrated, and can be diluted up to 1:30, which is not more expensive than caustic soda.

It can be cleaned with a special cleaning compound, such as BAI.

It is a new long-term and environmentally friendly water-based cleaning agent integrating emulsification, dispersion, foaming, DAO wetting and dissolution, which has a strong penetration, peeling and emulsification effect on animal and vegetable oil stains and mineral oil stains.

It is suitable for daily oil cleaning such as stainless steel doors and windows, epoxy resin floors, workshop oil stains, sofa carpets, tables and chairs, glass, kitchen oil stains, etc.

You need a little cement and sprinkle it evenly on the grease stains.

The specific cleaning steps are as follows:

1. Prepare the required material cement.

2. Clean up the debris on the ground and clean up the garbage on the ground.

3. Sprinkle the cement powder evenly on the oil stains and cover all the oil stains.

4. Rub the cement powder repeatedly with a broom to keep the cement powder fully covered with oil.

5. Use a broom to sweep away the cement powder, and you will find that the oil on the ground has been cleaned up.

There is a special degreaser, if you use a floor scrubber to clean the ground, you can pour it directly into the clean water tank, Qingdao Hemei produces a floor scrubber, you can ask.

Pour a little vinegar on the mop to remove the ground oil. If the oil stain on the cement floor is difficult to remove, you can get some hay and wood ash the night before, mix it with water to make a paste, and then rinse it repeatedly with clean water, and the cement floor can look new.

After the cooker is stained with oil, you can use viscous rice soup to coat the stove, and after the rice soup scabs dry, scrape with an iron sheet to remove the oil stains along with the rice soup scabs. If you use thinner rice soup and noodle soup to clean directly, or use mullet bones to clean, the effect is also good.

The glass oil stain can be wiped with alkaline decontamination powder, and then applied to the glass with sodium hydroxide or dilute ammonia aqueous solution, and after half an hour, it will be scrubbed with a cloth, and the glass will become smooth and bright.

Sweep away the dust on the surface with a broom first, then add 500ml of water with 15 grams of cleaning essence, stir evenly and wipe both sides with a rag to remove the greasy. Or add a small amount of milk to the laundry detergent solution and the washed out screen will be as good as new.

Add an appropriate amount of vinegar to clean water and wipe the furniture oil to remove the oil stain. Or soak it in bleach solution for a while and then wipe it, and the stain removal effect is also very good.

Pour a little vinegar on a vinegar mop to clean the floor to remove the grease on the ground.

Rice soup for cleaning gas stoves, gas stoves, and liquefied gas stoves are easy to get oil stains. If it is washed with alkaline water, it is easy to wash off the paint; If you wash it with water, you can't wash it clean. You may wish to apply sticky rice soup to the stove, after drying, the rice soup will scab over, which will stick the oil together, so that you only need to scrape with an iron sheet, and the oil will be removed along with the rice soup scab.

In addition, it is also good to clean it directly with thinner rice soup and noodle soup, or to scrub it with cuttlefish bones.

It is difficult to wipe the oil stain on the glass with newspaper and rag to clean the glass with alkaline decontamination powder, and then apply sodium hydroxide or dilute ammonia aqueous solution to the glass, and then wipe it with a cloth after half an hour, the glass will become smooth and bright.

Cleaning screen with dish soap The screen of the kitchen window is difficult to clean after being grudged with oil. One way is to sweep away the dust on the surface with a broom, then add 500 ml of water with 15 grams of dish soap, stir evenly and wipe on both sides with a rag to remove the oil. The second is to add a small amount of milk to the laundry detergent solution, and the washed out screen will be the same as new.

The cleaning method for oil stains on the cement floor is as follows:

1. If it is edible vegetable oil that has just been dropped on the ground, we can use common detergents such as dish soap and laundry detergent to clean it.

2. If it is edible vegetable oil that pollutes the cement floor for a long time, we can use caustic soda and special degreasing agent for cleaning. Note: Prevent burns during cleaning.

3. If it is mineral oil dripping on the cement surface, we can use sawdust and the like to adsorb a part of the oil stain first, and then remove it with professional oil stain removers such as degreaser and carburetor carburetors.

4. The surface layer of the polluted cement floor is removed by mechanical grinding, and the new surface is exposed to achieve the role of renovation. Note: The machinery that can polish the cement floor includes terrazzo machine, special grinding machine for cement floor, milling machine, shot blasting machine, etc. However, it is necessary to find a special construction team for construction.

If the oil stain seeps in, it will not be removed unless the cement is cut off quickly.

Methods for removing oil stains from the ground:

Pour hot water over the oily floor to soften the stain.

Pour some vinegar over the mop.

Drag the floor with a mop, and after a while, you will find that the floor is shiny again.

I don't know if your floor is cement or porcelain, if it is, it's very simple, just wash it on top of it with wine (you can't add water at this time), scrub it with a cleaning ball, and then mop it with water with a mop, it's easy. The floor of our oil processing plant here is treated like this, and it's very simple.

Near the factory building, 1Grease removal of cement floor: wear rubber gloves, brush with caustic soda water (NaOH solution) with a board brush, and then rinse with water. 2.Degreasing the ground of the land: dig the oily soil layer with a shovel and put on new soil.

Heavy oil stains can be removed with soda ash aqueous solution or kerosene.

Use vinegar or plant ash There is a lot of oil on the ground, such as pouring a little vinegar on the mop, you can remove the grease on the ground.

It is difficult to remove the oil stain on the cement floor, if you can get some hay and wood ash the night before, mix it into a paste with water, and then spread it evenly on the ground, and then rinse it repeatedly with clean water, the cement floor can look new.

It is also easy to remove oil stains by using burned honeycomb coal ash mixed with laundry detergent to scrub the floor.

The dirt on the ground mainly appears in the factory building, chemical warehouse and auto repair plant workshop, and most of the dirt is mainly black spot dirt, which is mainly caused by construction and decoration, electric welding, automobile painting, metal chip oil, engine oil lubricating oil replacement and other operations, and these dirt and dust in the air accumulate to form oil scale. Don't rush to clean the grease when you find it, you should first find the cause of the formation of the grease and use the appropriate cleaning agent according to the actual situation. Generally speaking, if there is more oil on the ground, it is recommended to use a strong degreaser to clean, and if there are more stains, you can use the ground oil cleaner to clean, and it should be diluted according to the oil stain when using, and it is not allowed to use the original solution for cleaning.

Range hood cleaning tips.

Ways to prevent oil contamination in kitchen gas pipes.

This is the case for all users of piped gas buildings: the oil that adheres to the gas pipes is thick and difficult to remove. Here's a precautionary approach:

First, the oil stain drilled into the gas pipe is thoroughly removed, and then the paper strip (5 cm) wide cut from the waste wall calendar is wrapped along the gas pipe, which is not only beautiful and generous, but also very convenient to exchange for dirty paper strips.

Kitchen range hood degreasing magic.

After the range hood is used, the oil basin should be cleaned, and the plastic bag used to wrap sweet oranges can be put into the oil box and close to the wall of the box. When the box is full of oil, remove the bag full of oil and replace it with a new bag. This can not only solve the troubles of oil companies, but also use waste plastic bags, saving time.

The waste oil in the range hood oil box can be used.

Nowadays, many family kitchens use range hoods, and their oil tanks are full of waste oil within a few days. It is the best "oil remover" to remove stains from kitchen window lattices, ventilation fans and range hoods. Here's how:

Use a rag or torn towel to dip it in waste oil and apply it to the oily area, then wipe the oil with a cloth, and then wipe it with a clean cloth. Objects with thick oil stains can be soaked in waste oil for a few seconds, and then wiped off with a cloth after the oil stains soften (especially thick ones need to be scraped with a thin bamboo board.) ）

The oil in the cooker hood oil box is available. The doors and windows are connected with iron hinges, and the wear and tear of the opening and closing are very strong, and the waste oil can be dotted on the hinge shaft with a small wooden stick, which not only prolongs the life of the hinge, but also reduces the noise.

There is a trick to cleaning the range hood collection box.

After the oil collection box of the range hood is full of oil, it is difficult to remove the grease that adheres to the bottom of the box and the four walls, if it is cleaned every time, sprinkle a layer of washing powder on the bottom of the box, add a little water, the oil is lighter than water, and then there will be floating on the water when there is oil accumulation.

Cleaning of tiles around the gas stove.

The white tiles around the gas stove are easy to be polluted by oil splash fumigation, and it is not easy to wipe clean, according to a friend, you can use the colored plastic film of the wall calendar that was not used last year, and paste it on the tile with goldfish washing spirit around it, which can save wiping time, and can be changed every few months according to your favorite pattern.