-
The differences between ramie and flax are as follows:1. The origin is different. Flax originated in the Near East and the Mediterranean coast, and ramie originated in southwest China.
2. The appearance is different. It can be seen with the naked eye that the linen fabric structure is more compact and full, with smaller gaps and greater wrinkles; Ramie, on the other hand, has a looser fabric structure, larger gaps, and more pronounced folds.
3. **Different. Flax is a natural fiber that is versatile, and generally speaking, it is higher than ramie.
-
1. The weaving process is different. The warp and weft yarns of flax are mostly single strands, which are spun from relatively fine cotton yarn, so the appearance of flax is relatively fine. Most of the time, linen is woven in two ways: plain and twill.
Ramie is composed of two or more strands, which also leads to a rough appearance. In addition, ramie is generally mostly woven plain, and rarely twill weaving.
2. The characteristics are different. Linen has high strength, good wrinkle resistance, and stretchability. Good heat resistance, acid resistance.
Resistant to dilute alkali at room temperature. It has a good affinity for dyes, easy to dye, complete chromatogram, and bright color. Linen is soft, hygroscopic, breathable, and warm.
Ramie uses a relatively thick cotton fabric or linen fabric, most of the specifications of the yarn are thicker than the ordinary cotton yarn, the fabric is firm and resistant to folding, has good waterproof performance, and the characteristics are very strong and durable.
3. Different uses. Linen can be used as a textile raw material, woven into a variety of cool fine linen cloth, summer cloth, and can also be mixed with cotton, wool, silk or chemical fiber. Jute, hibiscus and other flax are suitable for spinning ropes and packaging sacks.
Linen can also be made into ropes, etc. Ramie can be used for automobile transportation and open-air warehouse covering and pitching tents in the field, ramie is used to make labor protection clothing and its supplies, after dyeing or printing, it can also be used as shoe materials, luggage fabrics, handbags, backpacks, tablecloths, tablecloths and so on.
-
Appearance: The folds of ramie products are obvious, the edges and corners are distinct, and the folds of linen products are large, natural and will slowly spread out; Cloth surface: The structure of ramie is very loose, the gap between the warp and weft of the fabric is very large, and the cloth structure of linen is very full, and the drape is particularly good; Ramie products become hard when exposed to water, and linen products are soft.
Linen is characterized by wear-resistance, flax can absorb ultraviolet rays, but it should not be exposed to the sun for a long time. It can be washed in a washing machine, but do not dehydrate in case the wrinkles are difficult to iron.
Ramie is a perennial root-bearing herbaceous plant, belongs to high-quality textile raw materials, is the longest and finest hemp fiber, with breathability, moisture absorption, antibacterial and anti-static characteristics, commonly known as the king of natural fibers", its quality and characteristics are incomparable to other fibers.
The difference between flax and ramie: first, the appearance, ramie products are obviously wrinkled, angular and angular, and flax products are folded large, natural, and will slowly spread out; The second is the cloth surface, the structure of ramie is very loose, the gap between the warp and weft of the fabric is very large, the cloth structure of linen is very full, and the drape is particularly good; Third, when exposed to water, ramie products become hard, while linen products are very soft.
Flax is a plant, and hemp usually refers to hemp plants, the general term for the fiber obtained from hemp plants, including flax, ramie, etc., in addition, hemp also refers to a kind of miscellaneous grain in ancient China (also used as fiber **), but it is not specified which kind of plant this refers to.
-
Leaves: Ramie leaves are round-ovate or broadly ovate, flax leaves are linear or needle-shaped. Flowers:
Ramie is a conical inflorescence, and flax flowers grow alone on the branches in an umbel-shaped inflorescence. Performance: Commonly used is flax, which is soft, permeable and has a bactericidal effect.
Ramie products are coarser than flax, and if you are not careful, you may scratch your **. <
1. Leaves: In fact, ramie and flax are easier to distinguish when they grow, and their leaves are different. The leaves of ramie are generally round ovate or broadly ovate, the length and width of the leaves are about 6 to 15 cm and 4 to 11 cm, the top of the leaf is pointed, but the bottom is relatively wide, and the edges of the leaf are toothed.
In addition, the surface of the ramie leaves is relatively rough, and it feels like there is still a small amount of hairs on it. The leaves of flax are linear or needle-shaped, generally only three or four centimeters long and only four or five centimeters wide, which is relatively sharp, and the leaves often appear involuted. In addition, the surface of the leaves is smoother than ramie, and there are no hairs.
2. Flowers: Ramie and flax can also be found to be different when they bloom. Ramie is generally a conical inflorescence, its inflorescence is generally spread out, and the petals are also very small, and the color is generally blue, white, and purple-blue.
Flax flowers generally grow alone on branches, in an umbel-shaped inflorescence, and the color is basically similar to ramie, but you can basically tell them by looking at the shape of the flowers.
3. Performance: In fact, when it comes to the performance of ramie and flax, it is enough for me to say one thing here. In fact, in our lives, linen products are more commonly used, because although linen products are rough, they are still relatively soft, the permeability is not bad, and they also have the effect of sterilization.
However, ramie products are coarser than flax, and they may also be scratched if you are not careful, which is equivalent to the coarse cloth of the poor people in the past. In addition, ramie has poor air permeability, and it is easy to harden and harden after soaking in water, while flax will be much better.
4. Efficacy: The efficacy and function of ramie and flax are also different. In our lives, flax is basically used to process linen into sackcloth, and then make it into various clothing, household items and the like.
The main role of ramie is not to be processed into cloth, more often, we use ramie to make paper. The second is that in addition to the role of these two aspects, ramie can also be used for brewing oak, sugar and refining solution, and the young stems and roots of ramie are edible, with the effect of clearing heat and diuresis, and slowing down the fetal calendar. These are all things that flax doesn't have, so it's also easy to distinguish.
Linen is an important raw material in the hemp textile industry, and its fibers are strong, flexible and have good color. Flax fiber is strong, not easy to rot in water, and has waterproof effect, in addition to friction resistance, high temperature resistance, fast heat dissipation, low dust absorption rate, not easy to tear, not easy to burn, no static electricity, high acid and alkali resistance high unique advantages. Flax is the cortical fiber of the plant, its function is similar to that of a human, and it has natural properties such as protecting the body and regulating temperature. >>>More
The differences between hemp and flax are as follows: >>>More
The first distribution range is different, the origin of flax is mainly in Europe, with an average height of about 1 meter, which is a typical "small jasper"; Hemp mainly originated in China, with a height of more than 1.8 meters, and is a native "Oriental supermodel". >>>More
Generally speaking, the word "account" can also be used for currency, but the word "account" must be used for textiles. Beg.
Tracing the source, tracing the source, exploring the root and source of things; The earliest is the food safety management system gradually established and improved by the European Union in 1997 in response to the problem of "mad cow disease". This set of food safety management system is promoted by the first industry, covering the upstream and downstream of the entire food industry chain such as food production bases, food processing enterprises, and food terminal sales, and sharing information through special hardware equipment similar to bank ATM systems to serve end consumers. >>>More