Can I bring two set top boxes for a closed line tee?

Updated on technology 2024-07-30
31 answers
  1. Anonymous users2024-02-13

    Can I bring two set-top boxes for a closed line tee? You can bring two set-top boxes for the closed line to connect the tee, but we have to find a professional fulcrum, and we can't take it ourselves.

  2. Anonymous users2024-02-12

    You can bring two set-top boxes when you connect the tee, no problem! , Biluo wire is generally connected in parallel, and this is how it is connected.

  3. Anonymous users2024-02-11

    This closed circuit cannot be connected to two set-top boxes after connecting the tee.

    Because in order to connect two set-top boxes, there needs to be a splitter device, without this splitter, the two set-top boxes have no way to use the line of closed-circuit television to complete the signal reception of digital TV.

  4. Anonymous users2024-02-10

    Closed-circuit tees can be carried with two set-top boxes, or even three, but the point is that there is no other big effect.

  5. Anonymous users2024-02-09

    Generally speaking, it is possible to bring two set-top boxes, and you need to have one on hand, because it can also connect two.

  6. Anonymous users2024-02-08

    Of course you can, it's just a signal, as long as the signal strength is enough, you can connect a few more.

  7. Anonymous users2024-02-07

    Generally, you can bring it, but you can't retreat from it, and if I want a set-top box, it's enough.

  8. Anonymous users2024-02-06

    Well, with a closed circuit for a tee, can you bring two set-top boxes? This should not be possible, and it is okay to rarely see it, that is, there are two red stone families.

  9. Anonymous users2024-02-05

    Hello, probably with two set-top boxes. You can choose according to your actual needs.

  10. Anonymous users2024-02-04

    The route delivery together with can carry two set-top boxes than the route connection three can be carried.

  11. Anonymous users2024-02-03

    For example, if you connect the line to the tee, can you bring two set-top boxes, I think this is more than the route to connect the tee can bring two skills.

  12. Anonymous users2024-02-02

    If this closed line is connected to three links, I think of course you can bring two set-top boxes.

  13. Anonymous users2024-02-01

    Yes in closed-route ordering. With two set-top boxes, this one is okay.

  14. Anonymous users2024-01-31

    The route can be connected to the tee with two set-top boxes, it is still possible, it should be possible, yes.

  15. Anonymous users2024-01-30

    It should be possible, and it is completely possible to drive two set-top boxes by connecting the tee on a closed circuit, and it must be rewired.

  16. Anonymous users2024-01-29

    Unlimited tee, can I bring two set-top boxes? It depends on whether he can drive it?

  17. Anonymous users2024-01-28

    Buy a splitter, not to mention 10 units of one machine.

  18. Anonymous users2024-01-27

    Theoretically, it can be connected to countless set-top boxes, but it needs to be connected to a branch distributor for isolation, and an amplifier is added when the signal is weak.

  19. Anonymous users2024-01-26

    A cable CCTV line that can be connected to 2 (or more) set-top boxes for 2 (or more) TVs! 2 TVs can be tuned to different channels, without affecting each other, there is no limit. The key is to have a TV with a set-top box!

    If you are afraid that the signal of one wired CCTV line connected to multiple set-top boxes will be attenuated, you can buy a one-point two-point (or one-point.

    Three, one point four) dispenser, there is no problem at all.

  20. Anonymous users2024-01-25

    You are right, each set-top box can only watch one channel, and the two set-top boxes can watch their own channels separately without affecting each other.

  21. Anonymous users2024-01-24

    The key is to see if the user box you connect to has signal attenuation. It is generally not recommended that you do this, because a user box costs at least 10 yuan, the simple way is that you go to the place where you sell equipment and ask him to make a wire for you, two joints on the line are 2 yuan, and the line is good for one meter, you can calculate how much it costs. Or you can also buy a two-way connector and find a cable to connect it yourself.

  22. Anonymous users2024-01-23

    The cable TV transmission line in the home can be connected to two terminal sockets; Your home has a set-top box, indicating that it has been transformed into digital compression transmission, therefore, this kind of cable directly plugged into the TV is useless, unless a very small number of TVs have built-in DVB-C digital decompression circuit, if there is, it can be read out in the TV manual; At this time, there must be two TV set-top boxes to achieve effective viewing of two TVs; After entering the house, there should be a standardized branch device for wiring, otherwise the impedance will not match and the field strength will be insufficient; The wiring should also be noted, the core wire and the shield wire should be strictly separated, if there is a short circuit, there is no signal.

  23. Anonymous users2024-01-22

    As long as it does not affect the effect of cable TV (the cable can only be connected to the set-top box, and the yellow, red, and white video and audio plugs of the set-top box are connected to the TV). I suggest that you should not connect like this, as it will affect the effect for a long time. The best way is to buy a 5 coaxial cable (the line is as long as possible than the actual length of dozens of centimeters), when buying the wire, the boss should do a good job of connectors, on one side is a cable TV male plug, on the other hand is a cable British connector (the set-top box input interface is imperial).

    Of course, it is best to buy it at the radio and television business hall.

  24. Anonymous users2024-01-21

    However, it is necessary to install a branch at the entrance cable.

    The specific wiring method is shown in the figure above, the input signal is connected to the IN place, and the two ends of the OUT can be connected to the two CCTV socket boxes respectively. Of course, you can also choose thirds, quarters, you can do it.

  25. Anonymous users2024-01-20

    Yes, because the digital TV signal is still transmitted through the original cable cable, just add a 2 splitter for cable TV.

    Digital television, also known as digital television or digital television, refers to the television type that uses digital television signals or all the signal propagation of the system is transmitted through a binary digital stream composed of digital strings, as opposed to analog television. Its signal loss is small, and the reception effect is good.

    A set top box (STB), commonly known as a set-top box or set-top box, is a device that connects a television to an external source. It converts compressed digital signals into TV content and displays them on the TV.

    Signals can come from wired cables, satellite dishes, broadband networks, and terrestrial broadcasts. In addition to the images and sounds that analog TV can provide, set-top boxes can receive digital content, including electronic program guides, Internet pages, subtitles, etc. Enables users to digitally program on existing television sets and engage in interactive digital entertainment, education, and commercialization activities over the network.

  26. Anonymous users2024-01-19

    No, you can only use one machine and one line.

  27. Anonymous users2024-01-18

    How do I get a hair extension? Please send a picture! Thank you!

  28. Anonymous users2024-01-17

    If it is an ordinary network set-top box, that is, a non-operator ITV platform, you can connect multiple network set-top boxes with one network cable, as long as the bandwidth is sufficient, you can connect to multiple networks, while the operator's network set-top box is connected by the ITV port of the optical modem, and can only be connected to one set-top box.

    Two set-top boxes need different programs, obviously the data they need is not the same, the router can only transmit data to one address under an excuse, so how does it know, which data is the set-top box to use, to use two set-top boxes, either add a network cable, or add a router or switch.

    Both ends of a network cable can be made two network crystal heads and then the two crystal heads at the same end are connected to a network set-top box The two crystal heads at the other end are connected to the router, after handling the telecom IPTV network TV service, you can choose to increase the number of set-top boxes to use, the increased set-top box is called the sub-set-top box, and the sub-set-top box can be increased by up to three.

  29. Anonymous users2024-01-16

    Cable TV is connected to 2 TV sets, 2 set-top boxes are needed, and you need to go to the radio and television business hall to buy (the second box is more expensive), and you also need to pay an additional cable TV viewing fee for the second box; However, now there are boxes on the market that can receive cable TV, Taixin box, 2 Taixin boxes, there is a network at home, and there is a radio and television smart card that has opened normal payment, and you can watch cable TV independently of each other with 2 TVs. And only pay a cable TV viewing fee, and the box is also much cheaper than that of radio and television, you can find out.

  30. Anonymous users2024-01-15

    It doesn't matter, we have a CCTV building in one building, it doesn't matter.

  31. Anonymous users2024-01-14

    As long as you are not using a set-top box, the closed route can be divided into two with a tee, and you can also divide another one on the closed route

Related questions
8 answers2024-07-30

The three-way ball valve is a three-channel rotary ball valve, which is mainly used for medium diversion, merging and flow direction switching. >>>More

21 answers2024-07-30

I will introduce the recipe of three-way soup to you today. Why is it called three-way soup? Cardiovascular, cerebrovascular, and systemic vascular, so it is called three-way soup. >>>More

7 answers2024-07-30

The following is the body structure of the three-way control valve**, you can look at it, you can see from the figure that the three-way control valve has two valve seats, to give a column, the valve is now three-way confluence regulation, the left and the bottom are the inlet pipe, the left side of the cold water into the hot water, you need to adjust the temperature of the mixed water, this is the most typical case, the valve factory state is set to 4mA when the valve is left and right, the lower inlet is closed, so now adjust the mixing temperature to input 4-20mA signal, When 12mA, the left and the bottom are opened half, and the left side is fully closed when the 20mA signal is entered, and the bottom is fully open, so that the left and bottom sides can be adjusted to open the water, so as to control the temperature of the mixed water. (FYI).

12 answers2024-07-30

Yes, but there are the following disadvantages:

1.It is not conducive to the removal of air inside the pipe. >>>More

6 answers2024-07-30

Not one. The electric three-way valve only plays the role of a switch. >>>More