The faucet of a fully automatic washing machine is not universal

The general water injection joint is universal, it supports the use of 4-point or 6-point faucet, and there are four screws on the water injection joint, which can be directly clamped on the faucet to ensure sealing.

The automatic washing machine is to pre-set n programs for the whole process of laundry (soaking-washing-rinsing-dehydration), select one of the programs when washing, turn on the faucet and start the washing machine switch, the whole process of laundry will be automatically completed, and the buzzer will sound when the laundry is completed.

The water injection joint is universal, it is to support the use of 4 points or 6 points of the faucet, there are four screws on the water injection joint, which can be directly clamped on the faucet to ensure the sealing, if there is a water leakage, it is recommended to contact the after-sales service directly 4006 999 999, and go to Haier after-sales service to buy a water injection joint OK

It is universal, it may be that the rubber pad inside is damaged and there will be water leakage.

1. You can compare the newly bought tube with the old tube, if there is a big difference in the interface, it will definitely not be what you want to use;

2. You refer to the connection method of the original water pipe, or use the old water pipe to connect it, whether it can be easily connected, and then use the new water pipe to connect it, if it is the same, it must be connected.

If neither of the above methods work, just take the old water pipe to the plumbing store and buy one back.

The answer is no.

My house is also a Haier automatic washing machine, and it needs a professional faucet, otherwise it will leak. Professional faucets are available in hardware stores and supermarkets.

I suggest you buy a better one. The quality of the faucet I changed last year was not good, and it broke when I was washing clothes.

Originally, there were four roses of an adapter joint, but now there is a universal faucet that does not use an adapter joint, just plug it in.

It must be that the contact is not tight, and double-check again.

It must be left on all the time, and then since the fully automatic washing machine has an inlet valve, the opening and closing of the valve is passed. to control whether water enters the washing machine, so your faucet will only be used if the inlet pipe is removed. Usually when you are washing clothes, you must keep the tap in the position where the water supply is always on.

When washing in a fully automatic washing machine, the faucet must be on all the time. The water inlet of the fully automatic washing machine is automatically controlled by its program through a solenoid valve. The solenoid inlet valve is closed under normal conditions, and the solenoid inlet valve will be opened only after the power supply is started.

When using a fully automatic washing machine for laundry, the power is turned on first, the faucet is turned on, and the washing selection, washing program and water level are set.

The faucet must be left on all the time during the operation of a fully automatic washing machine. When the laundry is done and the washing machine is not used, the faucet can be turned off.

The water inlet pipe of a fully automatic washing machine can be plugged into the faucet all the time, but it is recommended to turn the faucet off after washing clothes to prevent water leakage caused by the water inlet pipe falling off.

The automatic washing machine and faucet must be turned on when washing clothes, and the faucet should be turned off after the clothes are washed.

If you don't use it, you can naturally relate to the faucet. But if you want to use it, you need to keep it open all the time.

In addition, the water valve control of the washing machine is set with automatic switch, and if the washing machine does not need to supply water, it will automatically be related, and the function of the faucet is the same, so there is no need to worry about wasting water.

When you use it, you don't need to open it, it is automatic water addition and automatic drainage. When you run out, you can turn it off.

To choose a 4-point washing machine faucet, when using this kind of water inlet pipe, you can remove the water outlet faucet, screw it directly, and connect it with threads.

Faucet is a popular name for a water valve, which is used to control the size of the water flow and has the effect of saving water. The replacement speed of faucets is very fast, from the old-fashioned cast iron process to the electroplating knob type, and then to the stainless steel single-temperature single-control faucet, stainless steel dual-temperature double-control faucet, kitchen semi-automatic faucet.

More and more consumers will consider the material, function, shape and other aspects of faucets.