How to use Sanyo automatic M806Z washing machine?

Before using a fully automatic washing machine, check whether there are hairpins, coins and other items in the clothes that need to be washed, and if so, you need to take them all out.

Plug in the washing machine, connect the drain and put the laundry in the washing machine.

Add laundry detergent or detergent after putting the clothes in, and the amount of laundry detergent depends on the amount of laundry and the degree of dirt. Add laundry detergent and pour it directly into the washing machine, or pour it into the washing machine's own laundry detergent box, then turn on the faucet and close the lid.

Press the power switch of the washing machine, choose the washing method of the washing machine, the washing method of different washing machines is slightly different, you can choose the water level according to the number of clothes, and choose the corresponding program according to the specific material of the clothes.

After selecting the program, press the "Start Pause" button of the washing machine, and the washing machine will start working.

Some washing machines have a reservation function, and after making preparations, the washing machine will automatically start working at the set time.

When the selected laundry program is complete, the washing machine beeps to indicate that the laundry is complete.

After the washing machine is finished, turn off the power of the washing machine, unplug the power plug of the washing machine, turn off the faucet, open the cover, take out the laundry, clean the barrel of the washing machine, and wipe the washing machine dry.

First, put the automatic washing machine in place, connect the water inlet pipe (turn on the water when in use), plug it in, and put the water drain pipe into the sewer to use. When doing laundry, put the clothes in the washing drum, cover the washing machine cover, press the washing button and you're done. If you want to single wash or single spin, it is also directly selected after pressing start.

It's the simplest fully automatic wave wheel, just connect the water pipe, turn on the power, select the program, and press start. If you want to single wash or single dehydration, you can also directly choose to press start, and that's it.

Fault phenomenon. 1. The laundry machine does not operate when it is dehydrated.

Reason 1: The safety switch on the top cover of the washing machine is damaged.

Friends who often use washing machines must have this experience: if the top cover of the washing machine is opened when the washing machine is dried, the dehydration program will immediately stop Pai Zen orange, in fact, if the safety switch of the top cover of the washing machine is damaged, it can also cause the washing machine to not be able to spin dry.

Therefore, during the drying process of the dust mass of the clothes, try not to open the top cover to avoid damage to the top linkage switch.

Reason 2: The foreign body is stuck.

If the washing machine spin-off procedure cannot be carried out, there may be foreign objects stuck between the inner and outer barrels, you can open the door lid and work clockwise by hand.

If the inner barrel can be rotated, it means that there is no foreign matter, otherwise there is a foreign body, and it is removed.

Cause 3: Motor failure.

After the washing machine is turned on, if the motor speed is low or does not rotate, it is a motor failure, and the motor should be repaired or replaced.

If there is a humming sound that does not rotate, it means that the motor is short-circuited or damaged from turn to turn, or the capacitor is not connected to the motor circuit. At this time, cut off the power supply, remove the motor belt and restart it.

Reason 4: The solenoid valve is damaged.

This is one of the common reasons why the washing machine drying program does not work, the rotation of the inner barrel of the automatic washing machine is completed by the solenoid valve to convert the gear at the bottom, the solenoid valve is broken, the washing machine can not be dried, in this case the replacement of the solenoid valve can be solved.

Reason 5, motor thermal protector action.

The motor heats up.

When the action of the motor thermal protector will cause the washing machine to not be able to spin dry, and the reason for the motor heating is often overload, stalled, etc., at this time, as long as the thermal protector is reset, it can be used, and at the same time, pay attention not to put too much clothes when spinning dry.

Relatively large brands, products are very good, trustworthy brands.

Sanyo automatic washing machine QB50 a M807N how to single dehydration.

Hello, the method of dehydrating the Sanyo washing machine alone is as follows:1Plug in the socket of the Sanyo washing machine and turn on the power.

2.Put the clothes that need to be dehydrated into the inner cylinder of the washing machine; Arrange the laundry that needs to be dehydrated evenly around the inner circumference of the dehydration bucket and gently press it with your hand. 3.

On the washing machine, find the "Program" button and let the indicator light jump to the dehydration area. 4.By pressing the "Process" key, adjust the dehydration time.

5.Press the "Start" button to start dehydration. Press the start pause button of the washing machine, and the washing machine will start to dehydrate Zheng Tang to complete the single dehydration of the clothes.

The above is how to dehydrate Sanyo washing machines individually.

Sanyo automatic washing machine QB50 a M807N how to single dehydration.

Hello dear and thank you for your patience. Here are the steps to operate the Sanyo fully automatic washing machine QB50-M807N to spin individually: Turn on the power of the washing machine and make sure the washing machine is on standby.

Open the lid or door of the washing machine and place the laundry that needs to be dehydrated into the inside of the washing machine. Close the lid or door of the washing machine and make sure it is completely closed. Find the control panel on the washing machine, there will usually be a knob or button to select a different washing mode.

Select individual dehydration mode. Find the appropriate dehydration mode option on the control panel, which may be labeled "Dehydrate Alone", "Dehydrate Only", or similar. According to the operating instructions of the washing machine, adjust the spinning time and speed.

The desired dehydration time and speed can usually be set by a knob or button. After confirming the setting, Zen Heng presses the start button, and the washing machine will start to spin individually. Wait for the washing machine to finish the dehydration process.

The dehydration time may vary depending on the setting selected and the amount of clothing. When the washing machine finishes spinning, it will sound or display the corresponding indicator light. At this point, you can open the lid or door and remove the dehydrated garment.

What is the reason why the Sanyo XQB60-M808 washing machine does not work?

Hello, I'm glad to answer for you, what is the reason why the Sanyo XQB60-M808 washing machine Changqiao does not work? 1. After draining, check whether the lid of the washing machine is well covered before dehydration. After the lid is closed, it cannot enter the dehydration state, check whether the safety switch is damaged.

Wei Xunqi 2, if it is not after washing, it can be drained, indicating that the tractor is broken (replaced), 3, the dehydration clutch is damaged. 4. Another one is that the motherboard is broken (generally not broken). If you really don't understand, you can ask the maintenance staff to come to the door to see.

How to use the Sanyo full XQG65-L903BS automatic washing machine.

The specific use methods and steps of Sanyo washing machine: high return 1, first place the washing machine on a solid and flat ground, adjust and install it, connect the water inlet hose with the faucet and the washing machine water inlet, and open the faucet, put down the drainage pipe, and insert the drainage pipe into the floor drain hole. 2. Plug in the power plug, press the power button, and turn on the power of the washing machine.

3. Add detergent to the washing machine detergent container box, and add gold spinning or clothing softener to the washing machine laundry softener container box. 4. Put the clothes that need to be washed and dehydrated into the washing machine barrel and close the washing machine door. Decide on your laundry options and set up your laundry routine.

5. According to the amount of dehydrated clothes washed, choose the high, medium and low water levels of the water pants type switch. 6. Start the washing machine, and the water inlet solenoid valve is turned on at this time, and the water inlet will start (at the same time, flush the detergent placed in the detergent container box into the machine in advance). 7. When the water injection reaches the predetermined water level, the water level switch contact is turned on, and the computer controller sends a command to close the electromagnetic water inlet valve at this time, and the washing machine starts to run automatically (washing--- rinsing --- dehydration is completed).

8. At the end of the whole laundry washing program, the washing machine will automatically shut down after notifying the beep. Suggestion: Read the instruction manual again before use.

Steps for using the spin drying function in Sanyo washing machines: 1. When the spin drying function is used alone in Sanyo washing machines, choose to carry out a separate dehydration program "single dehydration (dehydration only)". 2. This procedure is for Hu Nianchai to facilitate the need for separate dehydrated clothing (such as soft clothes washed by hand).

3. For example, in order to save water, after using a single washing program, a separate dehydration program is carried out in stages. 4 It is convenient for users to make their own choices based on the inherent program of the washing machine.