The color of the wall on the floor tiles is heavier or lighter

1: Analysis of floor tiles on the wall.

Some customers are guided by the ceramic storefront shopping guide, under normal circumstances, the shopping guide will say, so well, you bought the floor tiles ours, it is recommended that the wall tiles use a color, look coordinated, directly use the floor tiles you buy now to cut the wall, very good-looking, but also durable, many customers will suggest. As a result, the same style of floor tiles were used for the kitchen, bathroom and other rooms to be used to lay on the walls. However, after using it for a while, she found that it was difficult to clean the floor tiles, especially the polished tiles.

It requires a lot of effort, which means that once the brick surface is stained, it is particularly difficult to clean.

Floor tiles, especially polished tiles and other products, glaze products are slightly better, because there is glaze, in fact, floor tiles also need to be maintained, otherwise it will change color after a long time. Porcelain tiles, wall tiles, are protected with a very thick glaze, in general, the surface layer is less polluted and easy to wipe.

In the current market, the home decoration implements a modern fashion and simple style, and the way of paving the floor tiles on the wall does reflect the coordination and personality of the ceramic tile design to a certain extent.

However, professionals say that wall tiles are pottery products, floor tiles are porcelain products, and the two are not free to use and match due to different water absorption, and they must be used professionally. Among them, the water absorption rate of wall tiles is about 5 8, and the floor tiles are only 0 5 or lower. Since the floor of the bathroom and kitchen often needs to be washed with clean water, the floor tiles with low water absorption should be laid, so that they are not easily affected by water vapor and are not easy to absorb stains.

The wall tiles are glazed, with a moisture content.

It is taller, and its back is generally rougher, which is conducive to the wall tile to fit more firmly on the wall. Therefore, it is best not to mix wall tiles and floor tiles, otherwise it is likely to bring inconvenience to life.

What is the difference between floor tiles and wall tiles?

Floor tiles and wall tiles, although they are all ceramic tiles, but the wall tiles are mostly glazed tiles, which are composed of three parts, the green body, the bottom glaze layer, and the top glaze layer. Floor tiles are made of clay firing and come in a variety of sizes. According to the material, it can be divided into glazed bricks, full-body bricks (non-slip bricks), polished tiles, vitrified tiles, etc.

It seems that there is no big problem to paste it, but the water absorption parameters of the two are different, the water absorption rate of the wall tiles is relatively high, and the water absorption rate of the bottom of the billet is generally about 10 18, especially the antique glazed tiles, which have the characteristics of beauty, moisture-proof, wear-resistant and smooth, and are mostly paved in the kitchen, bathroom, and balcony walls.

Floor tiles are generally heavier than wall tiles, and if they are attached to the wall, they may not be firmly glued for a long time, and they are easy to hollow or fall down. In layman's terms, wall tiles are tiles used for wall decoration, the water absorption rate of wall tiles is higher than that of floor tiles, and the wear resistance is not as good as floor tiles, but its colors are very rich, which can bring different visual effects to the wall.

Can floor tiles be on the wall?

Floor tiles are the main load-bearing body, so its specifications and characteristics are higher than wall tiles, plus its material types, color matching and pattern styles are more than wall tiles. Therefore, the effect of floor tiles on the wall is much more beautiful than ordinary wall tiles, and its size is much larger than that of wall tiles, so it is relatively simple and convenient to clean, because it has fewer joints. A lot of people choose it because it has so many advantages.

But if it is in the long-term interest, it is not good to put floor tiles on the wall.

First of all, the water absorption rate of ordinary floor tiles will be relatively low, generally less than 1, so the floor tiles are pasted on the wall, the cement mortar on it is not easy to stick firmly, and the absorption rate of ordinary wall tiles is about 10, it is no problem to paste tiles on the wall for a while, but after a long time, it is very easy to appear hollow and so on.

And because the size of the floor tiles is relatively large, so the time, manpower, and material resources spent in the construction process should be more, which undoubtedly increases the cost of decoration, so it is recommended that you try to choose special wall tiles, the construction is simple and convenient, and there are many styles to choose from.

The color selection of home decoration tiles should be determined according to the home decoration style.

Different styles and different colors: for example, if you have a simple European style at home, the general color is relatively light, light yellow, light white, and light red. In the case of Mediterranean style, the colors are generally bright, such as blue, brown, bread yellow, and coffee.

If you stick to the retro American style, the colors are heavier, dark brown, rose red, khaki, iron red, earth brown, bread yellow, etc. Now the color of the wind is also relatively light, light yellow, light red, white mainly.

The advantage of dark bricks is that they are dirt-resistant, they don't need to be taken care of at any time, and the overall feeling is stable and there will be no top-heavy feeling. The disadvantage is that if the floor is low, it will appear that the home is darker and the reflection is poor.

The advantage of light-colored bricks is that they are bright and fresh, and the furniture is easy to match. The disadvantage is that it is not very resistant to dirt, so it must be taken care of often, and it is conspicuous when a strand of hair falls on the ground.

How to choose the color of the floor tile:

1. Pay attention to the choice of brightness.

Regardless of whether the material of the floor tile is ceramic or wooden, they have a lot of selectivity in color, but for the color selection of the floor, it is still necessary to consider the color of the wall to be coordinated, and it is usually better to choose the color with low brightness, so as to create a sense of solidity and calm for the home environment.

2. Pay attention to the ground area.

For the interior with a relatively small space area, it is not suitable to choose too dark colors, and too dark floor tiles will shrink the visual effect of the ground and make the already small space appear smaller.

If it is an interior with a relatively large space area, you can choose a dark floor to create a sense of calmness, or you can use light-colored floor tiles to highlight the sense of activity, but you can not ignore the problem of brightness, so as not to confuse the color and destroy the overall style of the decoration design.

3. Look at the use of floor tiles.

The choice of floor tile color also depends on what location is used, the color of the floor tile in different places is also different, if it is used in the kitchen and bathroom, try to choose a light-colored floor tile that is not easy to hide dirt, and the bedroom or cloakroom and other places can choose a certain gray scale, with a soft texture of the floor tile color, which can improve the comfort of the whole space.

This depends on each person's preference, but I think the light-colored ones are better and beautiful, and they are not easy to see if they are stained with a little dust.

It depends on the overall decoration of your home, if the home is warm, use light colors, and cool colors, use dark colors.

Summary. Hello! If you want to become lighter in the later stage of this floor tile after the dark color, you can scrub it with some alkaline solution.

The floor tiles have just been paved and the color is darker, can they still be lightened?

Hello! If you want to become lighter in the later stage of this floor tile after the dark color, you can scrub it with some alkaline solution.

Are there any such products or detergents?

How long does it take to get lighter after washing.

Hello! There are such products, such as diluted lime water, as for the use time, it will be effective in about ten days and half a month.

There is glaze on the surface of the floor tiles, can it be used?

The effect is not bad.

Can lime water be cast over the glaze?

Yes, you can give it a try, it works great.

The darkening of the tiles is caused by the water absorption of the tiles. This is related to the water absorption rate of the tile.

The water absorption rate of ceramic tiles is the degree of water absorption of ceramic tiles.

The slower the absorption of water on the back of the tile, the better. To test the water absorption of the tile, you only need to pour a little water on the back of the tile, leave it for about 5 minutes, and observe the water absorption. The water absorption of ceramic tiles determines whether there will be blackening of joints and mildew spots during use, and the slower the water absorption, the better [1].

Consumers may wish to increase the absorbent "test" on the side of the tile. When selecting bricks, you can first take out a piece from the packaging box to see whether the surface is smooth and intact, whether the glaze is uniform and bright, and whether the edges around it are regular. Then take out another brick and align the two pieces, with as small a gap in the middle as possible.

If it is a pattern brick, it is necessary to check the number of blocks enough to spell out a complete pattern, so as to check whether the pattern is clearly connected. Then, take out all the bricks in a box and lay them flat on a large plane, and the whole effect should be consistent when viewed from a little distance. Stand these bricks one by one, compare whether the size of the bricks is consistent, the deviation of small bricks is allowed to be plus or minus 1 mm, and large bricks are allowed to be plus or minus 2 mm.

Finally, take a brick to knock another piece, or use other hard objects to knock the brick, if the sound of the brick is crisp and loud, it means that the brick is cooked and burned; If the sound is abnormal, it means that there is heavy skin or cracks in the brick.

Glazed bricks are the most common type of bricks in decoration, which are widely used in wall and ground decoration due to their rich color patterns and strong anti-fouling ability. 2. The surface of the whole brick is not glazed, and the material and color of the front and back are the same. Full-body brick is a kind of wear-resistant brick, although there are now varieties such as seepage bricks, but relatively speaking, its color is not as good as glazed bricks.

As the current interior design is more and more inclined to plain design, all-over bricks are becoming more and more fashionable, and are widely used on the floor of decoration projects such as halls, aisles and outdoor walkways; Generally less will be used for wall coverings. Most of the anti-slip bricks belong to the whole body brick. 3. Polished brick is a kind of bright brick made by polishing the surface of the whole brick body, which belongs to a kind of whole brick.

Compared with the whole body brick, the surface of the polished tile is much smoother. Polished tiles are hard and wear-resistant, making them suitable for use in most indoor spaces except washrooms and kitchens. On the basis of the use of seepage technology, polished tiles can make a variety of imitation stone and imitation wood effects.

Polishing tiles leave concave and convex pores when polished, these pores.