What to do if the color of the monitor is not correct What to do if the color of the monitor is not

Don't change graphics cards or drivers easily. First of all, confirm whether it is a problem with the graphics card of the host or the problem with the monitor itself, and change your monitor to another host to find out. In the case of this monitor, it is likely that one of the three sight tubes has failed, which is a common fault in monitors.

Whether it's a problem with the host or the monitor, it can be repaired, of course, if you don't understand it yourself, you can only find a professional to repair it.

Re-drive or update your graphics card!

First, troubleshoot the contact with the data cable between the monitor and the chassis.

If it is confirmed that the contact is good, it is a display failure, and the poor contact of the components of the video amplifier (picture tube tail plate) is more common.

Repair welding is sufficient.

The data cable pins on the monitor may be broken, or loose, it is recommended to repair it, if it is not for this reason, then you have to see if it is a problem with the graphics card, generally this is a broken pin.

If it's a problem of degaussing,The display itself is demagnetized,But when there is a magnetic reaction,There is a part of the display,There is a colorful display,Instead of changing for a while,So,You should check the pins,Shake it,See if the display has a normal display,If it's still like this,If there is no normal display,It is recommended that you repair the monitor,The problem inside,It's not just a simple repair computer will get it,Find someone to repair the TV,

<> contrast and brightness to 50, hue to 85, and saturation to 123. This can be done in such a way to adjust:

1. Open the control panel and find "Appearance & Personality";

2. After entering, select "Advanced Settings";

3. Enter Color Management and open it"Advanced options"；

4. Open the calibration display at the bottom of the menu;

5. Complete the correction of the display color according to the prompts.

Here's how to correct the color of your monitor:

Side-of-the-box method. <>

2. Click System.

3. Click on the right to pull down, find "Advanced Display Settings" and click to enter.

4. Scroll down, find "Color School State Branch Oak" and click to enter.

5. An interface pops up, follow the interface instructions, and keep clicking "Next Fight".

6. Jump to another interface, and then keep clicking "Next" <>

7. This is the correction is complete, click Finish in the lower right corner.

The color of the display screen is incorrect, you can adjust it according to the following steps (take Win7 N card as an example):

Click "Start Control Panel" to open the Control Panel;

Click on "Hardware & Sound";

Click "NVIDIA Control Panel" to open the NVIDIA Control Panel;

Click "Adjust Desktop Color Settings" in the left menu bar;

Click "Use NVIDIA Settings" on the right;

Click "Blue" in the "Color Channel";

Drag the button like "progress bar" below to adjust the blue channel moderately to make it a satisfactory color;

Adjust the "green, red" and other channels according to the step-by-step method to make its color satisfactory;

Click the "Apply" button to save and make the settings take effect.

When the hole row setup is complete, close the NVIDIA Control Panel and Control Panel.