Why does Apple s mobile phone consume power very fast these days, and it charges quickly

First. Suddenly, the power consumption is severe.

Or. You have a fever.

Basically, there must be software incompatibility or a stuck background. Clear the backstage.

Second. Some software has been using the location feature.

For example, Khalid.

Or. A variety of map-based navigation software.

Third. Set up the issue.

A few suggestions for you.

Settings - General - Background app refresh is turned off.

Settings-Privacy-Location function is turned off (under the premise that you don't need to use it, if you are shaking or road idiots, please ignore it).

Settings - General - Accessibility - Weaken Dynamic Effects option is turned on.

Settings - General - Accessibility - Enhance Contrast - Reduce Transparency ON - Burn Color On.

Settings - Display & Brightness - Auto-Adjust Off (Brightness is fixed to the range you see fit) Settings - Notifications (similar to Face

time) so that everything you don't need is turned off.

The battery is enough for you for two days.

No problem. The battery can be charged without running out of power. You can charge while playing. Just remember to empty and fill up again every month.

Tell you in addition.

I'm a pure hand fighter.

Whew...

Hello, if you keep the original system, the weather has become very cold these days, which will lead to rapid power consumption. If you upgrade to iOS 11, the new system will also consume more power. If your phone has not made any changes, and the power consumption suddenly increases, it may be that the battery is aging. Satisfied.

Phone charging is slow Reasons:

1. For data cable problems, the original standard power adapter and connection cable are the best. If it is some chargers that do not match, it will reduce the charging efficiency.

2. Turn off and charge. Shutdown charging is based on this, and the charging efficiency is higher. Of course, nothing can be done during charging, and this trick is suitable for situations where the charging time is short.

3. The temperature is too high during charging, resulting in a decrease in charging speed, it is recommended to remove the phone case and case. Keep in a cool place.

Electricity is very fast reason:

1. The battery is aging and the storage capacity is decreasing, so it is recommended to replace the battery.

2. The small capacity of the mobile phone battery itself is a design defect of the mobile phone itself and cannot be solved.

3. The software used needs a lot of computing and rendering, so it requires a lot of electricity, so it is recommended to run this kind of software less.

Solution: Turn off the sensor function, turn on the auto-brightness function, and Wi-Fi.

Close when the connection is used up, turn off the live wallpaper function, and turn off the GPS function in time.

1. Turn off the sensor function. There are many sensors in the mobile phone, some of which are very important, but some of them are tasteless and discarded, such as screen rotation, smart gestures and other functions.

2. The screen is a large power consumer, so it is best to turn on the automatic brightness adjustment function in the system settings, so that the screen can adjust the brightness with the change of the environment, which can save a lot of power.

3. The wireless network connection will be turned off when it runs out, especially in the environment without a wireless network, turning on the wifi connection means that the system has to constantly look for signals and constantly try to establish a wireless connection, thus consuming the power of the mobile phone.

4. Turn off the live wallpaper function. The operation of live wallpapers will occupy the CPU space of your phone and consume your phone's battery.

5. Turn off the GPS function in time. The GPS location function is the most battery-draining feature of your smartphone, so it's best to turn it off when not in use.

The iPhone charges quickly and consumes power quickly in the following ways:

1. The mobile phone system runs frequently, and too many applications are opened in the background, which makes the hand dispersal machine consume power very quickly. At this time, it is recommended to turn on the power saving mode that comes with the Apple mobile phone, which can help close some irrelevant programs and save power consumption.

The specific steps are as follows:

1. Light up the Silver Limb iPhone and put it in the "Home Screen" state.

2. Find and open the app "Settings" that comes with your iPhone6s in the "Home Screen", and click to enter the next step.

3. After entering the "Settings" center of your iPhone 6S, turn on the "Battery" function and go to the next step.

4. Enter the "Battery" detailed management page and find the "Low Power Mode" selected in the red box.

5. Select "On" low power mode, and the battery in the upper right corner of the screen will turn into "yellow", which will make the iPhone 6S seriously reduce the power consumption after upgrading to the latest system.

Second, the mobile phone battery is aging, easy to leak and run. This is also very harmful to mobile phones. It is recommended to go to the repair point or after-sales center as soon as possible to replace the new battery, which can solve the problem of fast power consumption.

3. System bugs, users report that the phone's battery is consumed too quickly after Apple's latest system update.

Fourth, it may be caused by the unreasonable use of mobile phone chargers. If you do not plug the charging head incorrectly for a long time, it may suddenly drain the battery very quickly.

It shows that the battery life has been seriously insufficient, resulting in a serious battery loss, and the original battery needs to be replaced after sale.

This happens because of the following wrong action:

1.Frequently operate the phone while it is charged;

2.Use a non-original data cable for charging;

3.Charge only when the power is empty for a long time;

4.Charge with a power bank frequently.

According to the above reasons, eliminate them one by one, solve them one by one, and do not cause fatal damage to the battery again.

We can determine whether the phone needs to be replaced by the following aspects: If it does not solve your problem, it is recommended that you bring your phone to an Apple customer service center for repair.

First, the power consumption is fast.

2. Automatic shutdown.

3. The phone is hot.

Apple after-sales staff reminds users that if the mobile phone is overheated and too hot, please turn off the mobile phone as much as possible and use the mobile phone after it cools down. Try not to play with your phone while charging to avoid danger.

This is caused by the phone using energy-intensive apps, the phone has too many functions turned on, or the phone has hardware issues.

1. Suspend the use of energy-intensive applications.

2. Turn off the functions that the phone does not need to use or turn on the power saving mode on the mobile phone, here is an example of turning on the power saving mode on the iPhone 7 mobile phone, the specific method is as follows:

<>3. Finally, turn on the switch of "Low Power Mode" in the battery interface.

3. Bring your mobile phone and warranty card to the official repair center of Apple mobile phone for maintenance.