-
Anonymous users2024-02-151. Network. Settings Configuration Settings Personal Configuration Settings Actions Add Network.
Account number: to be consistent with other licensed Nokia models) or other names.
Username: (empty).
Password: (empty).
Use Preferred Access Point: Cancel.
Access Point Settings:
**:Initiate.
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: (empty).
Password: (empty).
2. MMS.
Settings Configuration Settings Personal Profile Settings Actions Add MMS.
Account number: MMS or other name.
It must be written as such).
Use Preferred Access Point: Cancel.
Access Point Settings:
**:Initiate.
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: (empty).
Password: (empty).
3. Preferred access point.
Settings Configuration Settings Personal Profile Settings Actions New Access Point.
Account Name: CMWAP or other name.
Access Point Settings:
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: wap
Password: WAP
4. Flow ** setting.
Set the Personal Profile Settings action and add a new flow.
UDP port range 6790-7170
Use Preferred Pick-up Point: Cancel.
**:Close. Transmission mode: group data.
Packet data pick-up point: CMWAP
Network type: IPv4
Authentication: Normal.
Finally: Menu Settings Configuration Settings Preset Configuration Settings: Personal Settings.
Set the Configuration Settings Preferred Access Point and select CMWAP or another name
Menu Settings Configure Settings Launch the teaser settings in all software.
-
Anonymous users2024-02-14Set up the access point: Settings - Connection Settings - Access Point. The licensed goods should have preset three access points, mobile Monternet GPRS, China Mobile MMS, and GPRS to connect to the Internet. The configurations of the three access points are:
a) Montnets GPRS: data bearer mode GPRS, access point name CMWAP, username none, prompt password No, password none, authentication ordinary, homepage.
Mobile IP address automatic, primary nameserver, secondary nameserver, server, port 80
China Mobile MMS: Data bearer mode GPRS, access point name CMWAP, username none, prompt password no, password none, authentication common, homepage.
Mobile IP address automatic, primary nameserver, secondary nameserver, server, port 80
GPRS to connect to the Internet: GPRS data bearer mode, access point name cmnet, username none, prompt password No, password no, authentication normal, homepage none, mobile phone IP address automatic, primary name server, secondary name server, **server none, **port 0
3.Once the access point is configured, you can use MMS, Monternet, and email.
a) MMS Settings: Info - Options - Settings - MMS.
The access point used by China Mobile MMS, MMS reception is always on and is extracted immediately when the information is received.
Monternet settings are as follows:1, Function Menu Settings Connection Settings Access Point, press the option Add Access Point to use the default settings.
2. Connection name (customizable) Data bearer mode (GPRS) Access point name (CMWAP) Username (none) Prompt for password (no) Authentication (normal) Home page (http:
3. Option Advanced Settings Mobile IP (Automatic) Primary Nameserver (Not Selected) Secondary Nameserver (Not Selected) Proxy Server Address (**Port (80)
4. Go back to the connection settings GPRS GPRS Access (when needed) Access Point (CMWAP).
5, Network option Set Default Access Point (set to the connection name mentioned in step 2).
If you can't send MMS messages, please set them as follows:
1. Menu Settings Connection Settings Access Point, press the option Add Access Point to use the default settings.
2. Connection name (customizable) Data bearer mode (GPRS) Access point name (CMWAP) Username (none) Prompt for password (no) Authentication (normal) Home page (http:
3. Option Advanced Settings Mobile IP (Automatic) Primary Nameserver (Not Selected) Secondary Nameserver (Not Selected) Proxy Server Address (**Port (80)
4, Go to the Info option to set the MMS access point used (set to the connection name mentioned in step 2).
-
Anonymous users2024-02-13You can set the following network settings: Menu - Browser - **Server Settings--(Select the first one) - Name: China mobile - Home Settings --**Server** Server Port:
80 – Access Point Name: CMWAP
If you are free, you can get the communication 100 to call the waiter to help you set it up.
The mobile phone of D908 is a licensed mobile phone, you can directly enter "*2767*86927" in the standby state, and the mobile phone will be automatically set.
-
Anonymous users2024-02-121. Network Settings Configuration Settings Personal Configuration Settings Operation Add Network Account: DIYER or Other Name Home:
**Port: 80 Transmission mode: Packet data Transfer mode setting:
Packet Data Access Point: CMWAP Network Type: IPv4 Authentication Type:
Normal Username: (empty) Password: (empty) 2. MMS Settings Configuration Settings Personal Configuration Settings Operation Add MMS Account:
Must be written as such) Use Preferred Access Point: Cancel Access Point Setting: **:
Packet Data Transmission Mode Settings: Packet Data Access Point: CMWAP Network Type:
IPv4 Authentication Type: Normal Username: (empty) Password:
3. Preferred Access Point Settings Configuration Settings Personal Configuration Settings Operation New Access Point Account Name: CMWAP or Other Name Access Point Settings: Transmission Mode:
Packet Data Transmission Mode Settings: Packet Data Access Point: CMWAP Network Type:
IPv4 Authentication Type: Common Username: WAP Password:
WAP "or Stayer Empty" 4, Stream** Settings Settings Personal Configuration Settings Operation New Flow** UDP port range 6790-7170 Use Preferred Pick-up Point: Cancel **: Off Transmission Mode:
Packet Data Packet Data Pick-up Point: CMWAP Network Type: IPv4 Authentication:
Normal Last: Menu Settings Configuration Settings Preset Configuration Settings: Settings Settings Configuration Settings Preferred Access Point , select "CMWAP or other name" Menu Settings Configuration Settings Enable the teaser settings in all software.
-
Anonymous users2024-02-111. Network. Settings Configuration Settings Personal Configuration Settings Actions Add Network.
Account number: to be consistent with other licensed Nokia models) or other names.
Username: (empty).
Password: (empty).
Use Preferred Access Point: Cancel.
Access Point Settings:
**:Initiate.
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: (empty).
Password: (empty).
2. MMS.
Settings Configuration Settings Personal Profile Settings Actions Add MMS.
Account number: MMS or other name.
It must be written as such).
Use Preferred Access Point: Cancel.
Access Point Settings:
**:Initiate.
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: (empty).
Password: (empty).
3. Preferred access point.
Settings Configuration Settings Personal Profile Settings Actions New Access Point.
Account Name: CMWAP or other name.
Access Point Settings:
Transmission mode: group data.
Transfer Mode Settings:
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username: wap
Password: WAP
4. Flow ** setting.
Set the Personal Profile Settings action and add a new flow.
UDP port range 6790-7170
Use Preferred Pick-up Point: Cancel.
**:Close. Transmission mode: group data.
Packet data pick-up point: CMWAP
Network type: IPv4
Authentication: Normal.
Finally: Menu Settings Configuration Settings Preset Configuration Settings: Personal Settings.
Set the Configuration Settings Preferred Access Point and select CMWAP or another name
Menu Settings Configure Settings Launch the teaser settings in all software.
-
Anonymous users2024-02-10GPRS (WAP) Internet Settings?
Menu Tools Settings Connection Settings - Access Points - Options Add Access Points Use the default setting connection name: CMWAP (you can take it at will).
Data bearer mode: group data.
Access point name: CMWAP
Username: None.
Prompted for password: No.
Password: None. Identification: Safe.
Homepage: http: wa
Option Advanced Settings:
Network type: IPv4
Mobile IP: Automatic.
Domain name: Automatic.
**:Not. **Port: None (0).
China Unicom: Connection Name: Interactive Vision (GPRS); Data Bearing Mode:
grouped data; Access point name: uniwap; Username: Blank; Prompt for password entry:
Not; Password: Leave it in; Identification: Common; Home:
http://wa
-
Anonymous users2024-02-09Mobile users can directly call 10086 to customer service to help you get it.
-
Anonymous users2024-02-08Set up the issue. 1. First call your local 1860 voice** to activate your GPRS function, which generally takes effect after 24 hours.
2. Then follow the steps below to set up your phone:
Menu Settings Configuration Settings Personal Configuration Settings Actions New Network Name: Use the default No Change (e.g. name is My Network) homepage:
Username and password: empty.
Use Preferred Access Point: Cancel.
Access Point Settings:
**: Started.
Transmission mode: group data.
Transfer Mode Settings:
GPRS Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username and password: empty.
Then press 3 times in a row to return.
My network (the one you built above).
In this menu, press the left button to do and select Start.
Add access points: (if you don't have CMCC, you can add an access point by yourself) just if you stay in Paidan Cave in a place where my network has been established, you don't need to enter it again and add an access point directly).
Menu Settings Configuration Settings Dust Config Settings Actions New Access Point Name: Use the default No Change (e.g. name is My Access Point) access point settings
Transmission mode: group data.
The transfer method is set
Packet Data Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username and password: empty.
Then press 3 times in a row to return.
My access point (the one you built above).
In this menu, press the left button to select Start Late.
Then go back and press 1 time.
Preset configuration settings
Personal Configuration: In this menu, press the left button to operate, select Set as Tentative, and then Start the preset for all applications.
On this menu, "Select" and then "Confirm".
MMS settings: Menu Settings Configuration Settings Personal Configuration Settings Actions New Multi** Information Name: Use the default No need to change.
Use Preferred Access Point: Cancel.
Access Point Settings:
**: Started.
Transmission mode: group data.
Transfer Mode Settings:
GPRS Access Point: CMWAP
Network type: IPv4
Authentication Type: Common
Username and password are cleared.
Is it a song that was transferred in Nokia mode? Transferring with a PC suite (i.e. Nokia mode) will automatically convert other formats to M4AIt won't be with the data storage mode, it's the same as the operation.
There shouldn't be such a problem, it may be caused by software conflicts, and it is recommended that you delete useless files, which may solve this problem.
I use 5300, I feel very good, now Yangzhou is selling more than 900 yuan, and the battery sent is also very poor, to be honest, there is no need to risk more than 100 yuan for the province! I have bought a lot of things on the mobile phone, the quality is not good, electronic products unless there is a formal invoice and the market price difference is not too much, I recommend not to buy, think about it, friends, I hope it will help you.
It is most convenient to use the UCweb browser to access the Internet. >>>More
Ping the router first, see if the IP address is correct, note that some are not automatic and some are manually set, and the gateway must be the same as the router address. If not, try to change the cable of another machine, if there is a light on the card, the router and the light of the network card, it will definitely be on. Finally, wonder if there is a virus at work. >>>More