Unresponsive Procedure ends immediately, what is the reason for the unresponsiveness of the program

It is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Set up on 360 Security Guard.

When you usually play on the computer, you may encounter a program that does not respond and the mouse cannot be locked, what should we do? Here are the reasons why the program is not responding compiled for you, let's see. 1.

It's because this program needs resources from the system when it is running, but it has been in a state of insufficient resources, and after a long time, it starves to death. 2.The main reason for this problem is that the process priority of the program is too low.

When multiple programs make resource calls, the project applies for resources, but the resources are insufficient, the request is not approved, and after a long time, it starves to death. 3. The virus is also the program that applies to call system resources, but the resources are occupied by the virus for a long time, and even deprives other resources that have just been released, resulting in few available resources, or the virus forcibly modifies the priority of all processes in the process list, resulting in the resource call application being not approved for a long time. 4. It is recommended to kill viruses and optimize the system.

If you configured it earlier, you may want to consider upgrading or replacing a platform. If there are still very few programs that are unresponsive, consider manually adjusting the priority of the process in the Process Manager. Method 1:

1。button + approximate button button key - "End Task" button; You will find that your app is closed immediately. Method 2:

First of all, it is advisable to set up a shortcut on the desktop. Find a shortcut on your desktop. Right-click the button, press the mouse, and press an indicator key.

Select New shortcut. In the Create Shortcut dialog box, in the Object Position field, enter: ta scenario f fi"st.

The i in fi is a capital "i". Then give the new shortcut a name. For example:

End the task, and then click Finish. Now the shortcut has been made on the desktop. But its appearance and function are not quite consistent yet.

We can change it slightly. Right-click the shortcut and select Properties. It is recommended to open the "Shortcuts" tab and click "Change icon".

If the pop-up window says: "File C: Claim C:

Windows, 32ta, Porter La Platt" without icons...Please click "OK" to continue. Select a suitable icon from the list.

Finished product! After that, if there is a program that hangs up and can't respond, you can easily click on it.

Causes.

1. Reason 1: There are too many programs running.

This situation is more common, we sometimes use too many programs when we use the computer, but we do not close it, when the running program is too much, it will take up too much computer memory and it will crash.

2 Reason 2: Virus program.

For such a virus program, ordinary antivirus software can be solved, if you don't even have antivirus software installed on your computer, I think there are more such situations, virus software will continue to open a program, continue to execute a command, there will be a dead loop.

3 Reason 3: Too much computer junk.

For some people who don't know much about computers, you won't often sort out the files and junk on the computer, so that slowly the computer will deposit a lot of junk files, drag the running speed of the computer, and the computer will react slowly and be prone to crash.

4 Reason 4: Problems with network speed.

This situation does not occur very often, if the network speed is too slow, when visiting some dynamic web pages, there will be a request all the time, and the data can not be transmitted quickly, which will cause the computer to respond unresponsively.

end workaround.

1. The first task manager ends the task.

For this most common method, there are several ways to open the task manager in detail. The most commonly used way to open Task Manager is Ctrl+Alt+del, then a blue interface will appear, select Task Manager.

2Select the application in the open task manager, find the unresponsive program, then select it, click on the bottom to end the program.

3. If the program does not respond but the mouse can still move, try to open the task manager with the mouse, put the mouse on the taskbar under the widow interface, right-click and select to start the task manager, and then follow the steps above.

4. The second type is to launch the anti-virus software.

This method is aimed at virus software and system junk files, and let antivirus software help you clean up the junk files and some malicious software generated by the system.

Hello dear. There are many reasons why the program does not respond, and it is still more troublesome, mainly the following points: 1. It is because the program requests resources from the system when it is running, but it has been in a state of insufficient resources, and over time, the program does not respond.

2. The main reason for this problem is the process priority of the program, the priority is too low, and when the resource is called to multiple degrees, the program applies for resources, but the resources are insufficient, the request is not approved, and over time, the program does not respond. 3. The same is true for viruses, a certain program applies to call system resources, but the resources are occupied by viruses for a long time, or even deprive other resources that have just been released, resulting in few available resources, or viruses forcibly modify the priority of each process in the process list, resulting in resource calling applications not being approved for a long time. 4. It is recommended that the process scan and kill viruses and optimize the system, if the configuration is earlier, you can properly consider upgrading or changing the platform, if there are still very few programs that do not respond, you can consider manually adjusting the priority of the process in the process manager.

Ask questions, so the software can't be opened.

Dear, generally this situation occurs, the software can't be opened, you can try to uninstall the software first, then install, reopen it.

Uninstall all the questions.

The mouse can move, but nothing else.

Answer: Click on a software and the program does not respond, then you can delete this software and try it, if you open the computer, then it is a Trojan virus or a program error, and it is useless to shut down the question.

I used a 360's system first aid kit and it didn't work.

Ask if you want to take it to the store.

I think: 1 The computer is poisoned, 2 The network signal is too poor, 3 The hardware heat dissipation of the machine is faulty, such as the CPU fan stops working, etc. If you rule out the hardware problem, it must be poisoned, you say that you have killed it, it will not necessarily be killed, even the more bullish Kaspersky can not scan all viruses, if poisoned, please replace the system again.

Mobile phone programs often appear "unresponsive", just click this small switch, and solve it immediately.