The Canon S100SP printer is unresponsive

The part where the cartridge is located is stuck, your cartridge must not be able to move normally, see if there is something in it, there should be a movable plastic plate underneath, the problem is in it, move it to see, it's not a big problem.

I removed the drive and tried it from the installation. Mine is also an s100sp.

The Canon printer unresponsive status display error is due to the wrong printer settings, just set it again.

Tools to prepare: printers, computers.

1. First, right-click on My Computer and click [Manage].

2. [Services and Applications], click [Services].

3. Find the [Print Spooler] item on the right, right-click and select [Stop].

4. Win+R open and run, enter [spool] to confirm.

5. Delete all the files in [Printers] under [Spool].

6. Go back to [Service] and start [Print Spooler] to solve the problem.

Do you want to see if the port is set correctly? If you can't change the line, you can get the above formula for other machines, provided that your driver is installed, generally the driver is installed first and then the printer.

Since your printer has been used for too long, there is a paper roller at the paper feed, and the surface is smoothed out due to the electrification and long-term use, and the paper cannot be rubbed in, I mean there may be this reason, you can take a piece of paper and press it hard with your hand while printing to see how it goes.

See if there is a rubber sheet rotating at the paper feed and can touch the paper.

This situation is after you have installed the ink cartridge like this or after using it for a period of time, if it is after the ink cartridge is installed, it is recommended that you reload the ink cartridge or replace the ink cartridge to try, if it is used for a period of time, then it is possible that the internal paper rolling mechanism can not detect the paper, you should go to the maintenance station for maintenance.

It won't be put"Pause printing"Tick it off.

Let's see if it's a red light or a green light!

You go to the official website to find it, if you can't find this kind of support driver on the official website, I can't help it.

Although there are a lot, but none of them are to the point, there is no problem with the test cartridge, the original goods, the color matching settings are no problem, the driver has been tested, I also understand the hardware, and basically all the problems have been tested, so none of them convince me, collect and withdraw!

Ask Canon and ask them to teach you how to type the printer's self-test page.

The self-test page of the printer is printed directly through the chip curing program inside the printer, and has nothing to do with the computer.

If this self-test page prints out in black normally, then the problem is with your computer, and it must be a driver problem.

If the self-test page prints out black as well, then it is definitely time to replace the printhead or ink cartridge. Because you're buying a new one, you should be able to find a merchant to replace it directly.

Canon free technology is 95177178, fixed play is free.

Even if you say this, you still have to consider the problem of the plug, what happened to the newly bought, if it is a miscellaneous brand, it is likely that such a problem will occur. You take your head off and wash it first.

Let's analyze the problem, your previous was all good, now there is a problem, and only the black one has a problem, which shows that there is no problem with the drive, then it is also excluded that the new cartridge does not produce ink, so the problem is concentrated in the black printhead. If you do use miscellaneous ink to block it, then that's it.

Also, you can click on the test page to see if the test page can be typed?

It must be that your driver software is not fully installed, because the only reason you ruled out is the compatibility between the driver and the computer

It is recommended that you reinstall the system disk of the printer and reconfigure it according to the initial installation procedure to connect the printer and computer from the new one

And it is recommended that you re-check the color matching settings, it stands to reason that Canon's printer should not have driver problems, try it all

1. Confirm whether the printer driver is installed. Click Start, Settings, Printer & Fax in the bottom left corner and see if the printer icon turns dark.

2. If the driver is installed correctly, see what the error is when your printer is wrong, there will generally be an error**, such as 5100 and so on. What does the error mean, you can check it online or ask the Canon repair station**4006222666.

We are Canon Certified Repair Station, **88550716, Address: No. 168-4, Shanda Road, Jinan, Jinan Fengya Shida Technology****, if you have any questions, please feel free to contact.

Reinstall the printer driver.

See if there is any problem with the interface connected to the computer, and generally the disturber will automatically find the hardware after plugging it in. If you can't find it, it's very likely that there is a problem with the interface

If there is no problem with the power cord and power socket, it is necessary to consider that the printer's step-down and rectifier power supply is broken. View the original post