-
Anonymous users2024-02-071. When the ink cartridge of the printer is used up, turn off the printer first, and then lift the front cover of the printer, as shown in the figure below.
2. After opening the front cover, you can see that the old ink cartridge is staying at the far right end of the printer, which cannot be taken out at this time, as shown in the figure below.
3. Press the switch of the printer, when the machine is turned on, the old ink cartridge will move from right to left, as shown in the figure below.
4. When the cartridge is moved to the far left, press the cartridge down with your finger, and then pull it out, as shown in the figure below.
5. After the old cartridge is taken out, the cartridge will stop moving. (Note that if you don't press the cartridge in time when it moves to the far left, it will move again and then go back to the far right.)
6. Remove the protective film of the new cartridge, then put it in the original position of the cartridge, and then buckle it up. Finally, close the front cover and you're done.
-
Anonymous users2024-02-06It is not recommended to install it yourself, it is easy to burn the ink cartridge and printer, this installation needs to install the ink cartridge on the printing first, move the length of the ink tube left and right to find a place where the card will not be just right, and you can also watch the tutorial in the place where you sell it.
-
Anonymous users2024-02-051. Click on the computer start option and find the control panel. 2. Turn on My Computer to enter the control panel, and enter the hardware and sound options. 3. Click Add Printer under Device & Printer options.
4. Click Add Local Printer to select the port type of the printer. 5. Select the brand and model of your printer in the list of options.
-
Anonymous users2024-02-04Canon MG2580S ink cartridge ink filling hole where is the pro, hello, 1, open the printer's baffle, in the case of passing, the ink cartridge will automatically move to the middle position after opening the baffle. 2. Hold the bottom of the ink cartridge, gently lift it up and pull it back to take out the ink cartridge. 3. Peel off the label above the ink cartridge, and you can see several small holes above the ink cartridge.
The black cartridge and the middle section of the bridge hole, the color cartridge should find out where the three color holes are distributed. 4. Carefully observe the color of the sponge in the small hole, if it is impossible to distinguish, you can use a paper towel to plug in and absorb a jujube dot ink to determine the position of the three colors. 5. Disassemble the ink, put the long needle into the liquid hole upside down and slowly squeeze it to add the ink, add a few drops of ink, add too much ink will leak.
6. Wipe the ink cartridge clean after adding, and then attach the label back to seal it. I hope my answer is helpful to you, and I wish you good health and a happy mood! <>
-
Anonymous users2024-02-031. Open the lid of the paper outlet in front, and then the ink cartridge will move to the left position, hold the ink cartridge and press it down a little, and then lift it to hold it.
2. Turn on the printer first, and then open the printer cover, as shown below
3. After the cartridge is exposed, press the arrow of the cartridge to point there, and the cartridge can be taken out directly if it is loose.
4. Modern ink cartridges mainly refer to the parts used in inkjet printers to store printing ink and finally complete printing.
HP is the most prevalent.
If you're purely printing or copying, Canon is the right choice!! >>>More
What machine? To put it simply, such as Muto 1604!
You turn it off first, unplug it, and let off the static electricity! >>>More
First of all, your mobile phone supports the printing function, if the mobile phone does not support it, there is no way to print, if it does, you need to connect a printer plug-in on your mobile phone, in the mobile phone settings - advanced settings - printing page, enter the printer plug-in, search and connect the printer device (can be connected by WLAN connection or router hotspot connection), you can connect the printer to print. If you want to print labels, it is recommended to use professional labeling software.
Play a few more cards after the bet and try again later. Every time you add ink, add less, add a few more times don't be afraid of trouble, it's really not good to change the cartridge again, use up and then fill the ink, drill a small hole on the line, be sure not to add too much ink!
1. Click on the printer and fax machine, find the 1820 driver, right-click, Properties, Printing Preferences, press the tai key on the computer keyboard 12 times, click the mouse, and then the paper custom window appears, name the paper, enter the paper size, click, click OK, and select this custom size when printing the paper on the page.