Printer ink light not on? The Canon printer color ink lamp is always on

If the printer ink lamp does not light up, you can troubleshoot it by following the following steps:

1. Check whether the printer cartridge is damaged or there is no ink, and it is recommended to replace the ink cartridge with a new one to try to use;

2. Check whether the cartridge chip is damaged, resulting in the printer not detecting the cartridge, and it is recommended to replace the chip;

3. Check whether the main control board of the printer is damaged, and it is recommended to replace the main control board. If there is still no improvement, it is recommended to contact the after-sales service for specific verification.

The black ink lamp is not lit is that your printer can't recognize the ink cartridge, of course, it can't be printed, it may be that the chip on your ink cartridge is broken, the black one needs to be replaced, the color light keeps flashing, it means that the ink in you is insufficient, then you need to add ink to the ink cartridge, the method is also very simple, tear off the label on the ink cartridge and you will see that there are 3 small holes on the ink cartridge, take a drill, drill him bigger, and then add red to the inside, add blue on the left, and yellow on the right.

The black ink lamp is not lit is that your printer can't recognize the ink cartridge, of course, it can't be printed, it may be that the chip on your ink cartridge is broken, the black one needs to be replaced, the color light keeps flashing, it means that the ink in you is insufficient, then you need to add ink to the ink cartridge, the method is also very simple, tear off the label on the ink cartridge and you will see that there are 3 small holes on the ink cartridge, take a drill, drill him bigger, and then add red to the inside, add blue on the left, and yellow on the right.

If it keeps flashing, you have to see what the computer prompts, if the computer prompts that the cartridge is not recognized, most of the time it is the ink cartridge is cold, change the new ink cartridge, the original 3630 ink cartridge is not allowed to add ink at one time, it can be used but it is not easy to use, if the print volume is large, it is best to replace the ink cartridge printer as soon as possible. As for why the printer does not have a reminder mechanism mentioned by the subject above, in fact, there is, but it is obtained through chip calculation, please refer to my article about the printer in this article: Why do we use the printer to clear?

I see.

1.Operation on the printer panel: Press and hold "Stop Reset" for 5 seconds, and it will return to normal after rebooting.

2.If you can't print properly, check to see if the ink on the cartridge needs to be replaced.

3.If the ink is sufficient, it is a problem with the ink cartridge, remove the ink cartridge and reinstall it to check whether it is normal.

4.If it can't be solved, the cartridge needs to be replaced. It is necessary to ask a professional service personnel to check and replace it to avoid other unnecessary hardware failures.

1.Check to see if the printer cartridge is damaged or there is no ink, and it is recommended to replace the cartridge with a new one. 2.Check whether the cartridge chip is damaged, causing the printer to not detect the cartridge, and it is recommended to replace the chip.

Summary. Hello, glad to answer for you. <>

<>1.Press Menu on the control panel of your Canon printer to access the printer's menu. 2.

If you see a submenu, you need to press "Menu" to return to the main printer menu. 3.Then press the Up Arrow or Down Arrow button to scroll through the menu options displayed on the printer's display, select Preferences, and then press OK.

4.Select RestoreDefaults, and then press OK.

The Canon printer color ink lamp is always on

Hello, it's my honor to answer your questions, it will take a little time to sort out the answers, please be patient and wait for the next <>

Hello, glad to answer for you. <>

<> Canon printer color ink lamp keeps on for the following reasons:1The ink cartridge ink is insufficient, and the cartridge is required to be replaced.

If you are using a finger clip, it is necessary to reset the cartridge calculator. 2.The printer does not recognize the cartridge.

Since the chip contacts of the cartridge are usually oxidized, remove the cartridge, wipe the chip contacts of the cartridge with an eraser, and reinsert the cartridge.

If the bridge fluid is still not detected, the cartridge chip is often damaged, try replacing the chip. 3.The ink plier is always on, informing the printer that at least one cartridge has reached the end of its life and that it is recommended to replace the Canon printer cartridge.

Founded in 1937 in 1937, Canon is one of Japan's leading conglomerates for the production of imaging and information products, and over the years, Canon has globalized its business and expanded into various fields in Kiyono.

If my answer is helpful to you, please give it a thumbs up (rate it in the bottom left corner) and look forward to your like. <>

<>Your efforts are important to me, and your support is also the driving force for me to improve. <>

How to do a factory reset.

Hello, it's my honor to answer your questions, it will take a little time to sort out the answers, please be patient and wait for the next <>

<>Hello, dear, are you still there, here are the steps to solve the problem, can you follow the operation?

Hello, glad to answer for you. Coarse wax <>

<>1.Press Menu on the control panel of your Canon printer to access the printer's menu. 2.

If you see the submenu, you need to press "Menu" to return to the main pin finch printer menu. 3.Then press the "Up Arrow" or "Down Arrow" button to scroll through the menu options displayed on the printer display, select "Preferences", and then press "OK".

4.Select RestoreDefaults, and then press OK.

Hello, I'm glad to answer your questions. The most fundamental reason why the printer's indicator light does not light up is that the power supply and related circuitry may have failed. 1. Is the power cord of the printer connected, and the power switch of the printer is connected and turned on; 2. At this time, see if the printer has an indicator light.

Prompt: The ink in the printer cartridge is running out, please add ink or replace the cartridge in time; 3. Push the paper down to look at the book He Yan, this is the paper that cannot be touched when the paper feeder is rotated; 4. The sensor of the detection paper is not reset well, or it needs to be cleaned. I hope mine can help you and have a great day

1. The reasons are as follows:

1. There is a problem with the quality of the printer cartridge, and there is air or air leakage in the cartridge.

2. The nozzle of the playing Tongchai printing machine is aging or blocked.

3. There is a problem with the printer settings.

4. There is a problem with the quality of the printing paper, and it is not a special inkjet printer paper.

2. Solution:

1. Check the ink lamp on the control panel of the printer and prepare to replace the ink cartridge.

2. Place the printing medium correctly, and pay attention to the printing surface facing up; Or modify the media type in the driver to match the actual media.

3. Suspend printing after continuously, turn off the power, and wait for 10-20 minutes.

4. The nozzle has dirt to clean the nozzle.

5. When printing, select High Quality Printing in the Printing Preferences.

6. There are bubbles in the ink sail box to clean the nozzle.

The printer ink light is on, indicating that the fault is related to the ink cartridge.

Click Print, and the computer will prompt you with the specific cause of the failure.

Or the printer doesn't recognize the cartridge: Unplug the cartridge and reinstall it. The cartridge installation must be in place.

Or try a different cartridge. If you replace other cartridges that can be identified, most of them are due to damage to the cartridge chip.

Or the cartridge is out of ink and the cartridge is replaced.

If it is an original cartridge, replace it directly. Original cartridges cannot be reused.

If you are filling the cartridge or if it is a continuous supply of ink, unplug the cartridge and reinstall it.