What protection should I do when applying solar film?

Since the car film is the most sensitive to dust, it is necessary to choose a dust-free workshop for construction as much as possible when applying the film. In this regard, professionals introduced that the dust-free workshop does not have high requirements for hardware, and it can be relatively dust-free. It is understood that in the dust-free workshop, in addition to using the corresponding equipment, the staff should also spray professional liquid medicine around the body when applying the film.

The professional film solution can isolate the car film from the air for a short time, and at the same time remove the impurities around the car film.

Users who are equipped with on-board GPS in the car should try to choose the top car film when choosing the front windshield film. The heat shield of the ordinary front window glass film is made of metal braiding, and the antenna of the on-board GPS is generally placed in the cabin, so the metal heat shield will play a shielding role in the reception of GPS signals, making it difficult for GPS to find satellites or positioning deviations. The heat shield of the top-of-the-line front windshield film is woven from ceramic material, which will not have any impact on GPS.

After the vehicle film is completed, according to the standard of 7 days in winter and 3 days in summer, in addition to not opening the windows, the air conditioner should not blow directly on the front windshield. It is understood that after the film is completed, there will be a certain amount of water vapor between the film and the glass, and if the window is opened immediately, the wiper strip will scratch the car film; If the air conditioner blows directly into the front windshield, the car film will blister or even detach due to the different temperatures inside and outside the car.

Mainly vehicle protection, distributors and other components.

The precautions for attaching solar film are as follows;

First, the site with solar film must keep the environment clean, do not use electric fans, and do not construct on the roadside.

Second, the glass must be absolutely clean, and it must be cleaned repeatedly, if there are dust particles left on the glass, it will affect the adhesion and clarity of the solar film.

Third, the sun film is on the inside of the glass, which must be paid attention to, and do not stick it backwards.

Get plenty of rest. Rest helps to relax the nerves and restore physical strength, which is very important for maintaining good health. Take 6 to 8 hours of rest a day, including night's sleep and mental relaxation during the day.

Regular sleep and relaxation habits help regulate the body, promote food digestion and waste excretion. At the same time, sleep also helps to keep the mind clear, thanks to the guarantee of nutrients and blood**. Moderate amount of exercise.

Physical activity is a key factor in maintaining good health. Regular exercise helps to burn off excess calories in the body and improves the heart and circulatory system.

I wish you a healthy body.

Hello friend, the vehicle has just been affixed with a solar film. It can be dried in the sun, and this is generally not affected. After the first film, it is not recommended that the vehicle be next to the water.

Second, if the film is exposed to the sun after the film, this can allow the moisture generated by the film to evaporate quickly. Thirdly, under normal circumstances, if the film is applied in summer, the film can be used normally after 2 to 3 hours, and the external environmental temperature is relatively high this summer, and the water evaporation of the related film is relatively fast.

In winter, you can apply solar film.

The solar film can not only prevent the heat from entering the car, but also prevent the heat from running out of the car, which brings a thermal insulation effect, and the ultraviolet radiation in winter is not weak, there is a need for protection, therefore. Winter wrap is also very effective.

In winter, when the temperature drops to minus 30 in some places, the glass is easy to break when it is slightly squeezed, which is very dangerous when traveling at high speeds. And a high-quality heat insulation film can firmly stick to the debris when the glass breaks, so that it does not splash, so that you can avoid being harmed. Not only that, but the heat shield can also extend the time it takes for criminals to break car windows, making it difficult for the bad guys to get away.

Film selection:

When choosing a solar film, you must choose a brand that suits you, and try to choose those big brand products, so that there is quality assurance and the solar film can really eliminate the troubles of sunlight.

Although there are many kinds of solar film products on the market, there are not many brands that take the brand route, and these big brands are products that have been tested by the market, which can protect the rights and interests of consumers to a greater extent.

Prior to this, the solar film market has been monopolized by foreign brands for a long time, but since 2008, this monopoly has begun to be broken, domestic brands have begun to appear, and those regular domestic brands are also guaranteed in terms of product quality, so consumers can fully compare the performance when choosing, and choose the most suitable product for themselves.

The only thing that needs to be paid attention to is that after the winter film, it is possible that the glass cannot be lifted for 10 days and half a month, and the moisture in the film volatilizes more slowly. If the front windshield also has a film, pay attention to the air volume when the front windshield blows the wind and defogs. If there is a problem, go to the film to solve it in time.

It can be pasted in winter, but the winter film must be carried out in the room, and the film should be constructed in a regular store, with a dust-free environment, special equipment, standardized operation procedures and skilled technology.

At the same time, it takes 7 to 10 days for the water to evaporate in winter, and at least a month for the water to evaporate cleanly in the case of a Weigu membrane. In winter, the car glass is easy to fog and hang frost, do not open the rear windshield electric heating and defogging function for 7 days, and do not blow the warm air directly into the windscreen.

Because the moisture of the vehicle after the film is not dry, the evaporation of the water after turning on the electricity and heating is easy to cause bubbles, which affects the effect of the film.

Yes, the car film is not affected by the season, but there are two points to pay attention to. First, the film must be applied in a dust-free environment indoors to prevent dust particles from being trapped between the glass and the film. It is carried out in a professional construction shop, such as Gonami solar film, which has a dust-free workshop and strict requirements for the technical requirements of the master.

Second, the time for moisture to volatilize is slightly longer after pasting, try to wait for a longer time before washing the car and opening the window, which can also enhance the safety performance of the glass, safety explosion-proof, prevent glare, protect privacy, etc.

OK. It takes about 7 days for the car to dry after the film is applied in winter, and the windows should not be raised or lowered arbitrarily during this period. The reason is that the glass is usually tighter in cars that have just been affixed with car film.

In the process of opening and closing the car window, the edge of the car film is easy to grind and roll, causing damage to the car film. It is generally believed that the film is mainly used in summer, mainly for heat insulation, sun protection, and explosion protection.

There are also many benefits to winter wraps:

1. The most important explosion-proof safety of the film;

2. Prevent long-wave ultraviolet damage**;

3. In winter, the ozone layer is reduced and the ultraviolet rays are more intense.

In terms of the effect of the film, there are many more important than the thermal insulation function, such as explosion-proof function, anti-ultraviolet function, anti-glare function, and privacy function, etc., all of which belong to the category of increasing safety, which is far more important than increasing the comfort of thermal insulation. Moreover, try to choose a mature scale authorized store to do the construction, and it is the best choice to plan to apply the film immediately after the vehicle arrives.

Yes, if the film master has a good technique, it will not make any difference.

But I personally feel that it is better to post it in the summer.

Why? Let me share my personal experience with the film:

I picked up the car in June this year, after pasting the heat insulation film (front windshield), I found that there were a few small bubbles in the glass film on the steering wheel of the main driver's seat in front of me, I didn't pay attention to it at the time, the sun was particularly obvious, I looked for the master of the film (4S shop), after reading it, I told me that this is a normal phenomenon, and after a few days the sun will be gone, I didn't believe it at the time, because it was recommended by a friend, I was embarrassed to say more, I thought about it, stupid ideals, the screen of the mobile phone is so small, Sometimes there are flaws in the film, the front windshield is so big, a little flaw is normal, I didn't expect a month, it's really gone, and now there is no trace at all, I think it should be related to the abundant sun in summer and the high temperature in the car;

If you put it on in winter, I think it should test the skills of the film master more, right? Because if there are bubbles, the temperature is low in winter, and the sunlight is generally not very good, the bubbles should not disappear easily.

Summary. Hello, for your query of the following information, all the answers will be sent to you one by one, please be patient, do not close the conversation, thank you for your cooperation. The front cover needs to be protected as a whole before applying the sun film.

Because the tools used in the windshield mold opening can hurt the paint of the machine cover. At the same time, the instrument panel in the car must also be protected. The glass lift switch of the four doors needs to be protected.

Hello, for you to find the following information, all the answers will be sent to you one by one, please be patient, do not close the conversation, thank you for your cooperation. Before applying the solar film, it is necessary to protect the cover as a whole. Because the tools used in the windshield mold opening can hurt the paint of the machine cover.

At the same time, the instrument panel in the car must also be protected. The four doors of the glass Zheng Pai Li lift switch filter need to be protected.

There are many electrical components in the instrument panel, which are easy to cause ablation after water ingress. Affect the normal function of the vehicle. The rubber code of the door window regulator needs to be protected, if the water inlet switch will fail.

Mainly at the instrument panel and door switches. Thank you for your question, I hope it can help you, follow me, you can ask me questions at any time if you have questions, feel helpful and give a like, thank you. 