What should I pay attention to when applying solar film Can I just apply solar film in the sun

Is it attached to the car?

In that case, you can first make a small hard scraper, then spray water on the glass, and there is no harm in spraying more, then stick the sun film on, cut off those corners with a knife, and finally use the spatula to scrape off the water in the middle on the sun film.

Effect Help.

Don't stick the glass with too much arc, it will crack if you stick it!

Hello friend, the vehicle has just been affixed with a solar film. It can be dried in the sun, and this is generally not affected. After the first film, it is not recommended that the vehicle be next to the water.

Second, if the film is exposed to the sun after the film, this can allow the moisture generated by the film to evaporate quickly. Thirdly, under normal circumstances, if the film is applied in summer, the film can be used normally after 2 to 3 hours, and the external environmental temperature is relatively high this summer, and the water evaporation of the related film is relatively fast.

Car wraps. It doesn't have to be posted, and it doesn't have to be posted on every car.

The car factory has no film, the film is to block the sun in summer, and the temperature difference in the summer sun should be three or five degrees if the film is not pasted, so many people have film, and the car film should also understand the vehicle inspection policies of various cities. For example, in some cities, the front windshield and the glass outside the windshield are used for visible light in the driver's field of view.

If the perspective ratio does not reach 70%, the annual inspection will not be passed.

When pasting the car film, the triangle area left in the front window can not be filmed, otherwise it will affect the normal annual inspection of the vehicle.

Job. Extended Materials.

Car wraps are mainly used to block ultraviolet rays.

It blocks part of the heat and prevents the occurrence of injuries and anti-glare caused by glass splashing, and at the same time, according to the one-way perspective performance of the solar film, it achieves the purpose of protecting personal privacy. The base layer of the film is polyester film, which has the function of being very tear-resistant and anti-breakdown, and the adhesive layer of the film can prevent the glass from accidentally breaking the glass and causing damage to the driver and passengers.

It is more appropriate to choose a film with a light transmittance of more than 85%. At this time, the side window film does not need to be drilled and does not affect the line of sight, and when driving at night, the strong glare reflection of the headlights shining on the rear mirror can be weakened, which makes the eyes very comfortable. In addition, it can also ensure good visibility when driving, reversing, and turning around on rainy nights.

1. The most important function of the car heat insulation film is heat insulation: the most important thing for car owners when choosing car heat insulation film is the heat insulation of the car heat insulation film, when your car is exposed to the scorching sun, the temperature in the car is often unbearable. Most of the heat in the car is radiated through the unfilmed glass.

Turning on the air conditioner all the time will cause expensive gasoline costs, wear down the air conditioning system, and paste a high-quality car heat insulation film, which can quickly cool down the car and effectively insulate the heat. Today's top-of-the-line front windshield car heat insulation film can generally block more than 50% of the total solar heat!

2. Another function of automobile heat insulation film is safety explosion-proof: safety explosion-proof function is an important indicator of automobile heat insulation film, and it is also the role of automobile heat insulation film that car owners are more concerned about. High-quality automotive heat insulation film is made of special polyester film as the base material, the car heat insulation film itself has strong toughness, and with special pressure sensitive adhesive, when the glass encounters an accidental collision, the glass will be firmly stuck by the car heat insulation film after breaking, to avoid unnecessary damage!

In general, it is best to put the sun film on the car, because this can protect the overall quality of the car well, and can also reduce the temperature inside the car, so that the car is more scientific, comfortable and safe in the process of driving rectification.

Cars can be attached to the sun, the role of the film mainly includes heat and sun protection and privacy protection, the most important of which is used for heat insulation and ultraviolet protection, especially in summer, these benefits are fully reflected.

The car must be pasted with solar film, the first is sunscreen, to prevent the temperature in the car from rising rapidly, if the sun film is pasted, the temperature in the car room can be reduced to a certain extent, and the driving is more comfortable, second, it can play the role of the fifth day of the first month, referring to the role of sunlight shining on the eyes, so that the driver or passengers have a safety guarantee

I think it's better to stick the sun film on the car, because after the sun film is pasted, it can effectively isolate some ultraviolet rays from coming in, because the people in the car are not special dialects, and there are some benefits to the inside of the car, of course, if you don't want to pick it up, it doesn't matter, because this thing is not mandatory.

Cars don't have to be pasted with solar film, this is pasted according to their own needs, and the sun film is for sun protection.

It is best to stick a sun film on the car, which can protect the car from explosion, which is very beneficial!

Hello No, you can choose to stick it or not. It's a personal choice!

No, you can choose to apply it or not. It's up to the owner's personal choice!

I advise you, if it is not too much economic pressure, or paste a heat insulation film, heat insulation film is not only heat insulation, but also sun protection, I myself paste the Veroad Weilu heat insulation film, with SPF285 + sun protection factor, not only people will not tan, but also protect the car dashboard, seat these leather, not easy to fade due to long-term exposure to the sun, old.

The role of the sun film is to play a certain role in sun protection. You can post it, and my car will stick it.

Before the film, it is necessary to check whether the installation of the window glass is intact and the integrity of the car glass, so as to ensure that the subsequent film work can be run properly. Be sure to cover the necessary parts of the car before applying the film to prevent liquid from penetrating.

Wash the interior and exterior surfaces of the windows before applying the film (focusing on the interior surfaces and glass sealant areas). This is mainly to eliminate the dirt or other objects between the heat insulation film and the window glass after the film, and ensure that the film and the glass can be combined.

Do not raise or lower the windows for 3 days after applying the film.

Do not clean the heat insulation film and turn on the defogging line switch within one week after the film.

Do not clean the surface of the membrane with a solution containing alcohol or ammonia.

If air bubbles appear after the film is applied, it must be disposed of at the construction shop within 24 hours.

Do not let the air conditioner blow against the membrane to avoid violent thermal expansion and contraction.

The primary function of automotive solar film is to block ultraviolet rays that are absolutely harmful to the body and maintain the service life of automotive interior parts. Sticking car sun film is not a simple technical job, and it is not as simple as the film on the mobile phone as everyone imagined, the vehicle film must be more delicate and patient, and the film process is large, as follows:

1. Car wash.

Ensure that the natural environment of the operation is clean and tidy, and clean the internal and external windows of the vehicle to prevent interference with the actual effect of later installation.

2. Tailoring. The size of the solar film can be slightly larger, but not smaller, because it will be slightly smaller after the heater blows.

3. Paving. Generally, the automobile explosion-proof film is divided into a double layer of protective film and film, before pasting, the glass should be sprayed with some cold water, and the surface of the film to tear off the protective film also needs to be sprayed to reduce the stickiness of the adhesive, so as to facilitate the smoothing and adjustment of the parts of the film at both ends.

4. Finalization. The window glass glass has a certain inclination, and the heater should be used to carry out the baking film shaping, and the ambient temperature and the rate of movement of the hot air welding torch need to be grasped in the process of baking, and it can not be stayed in a position for a long time to ensure that it is not easy to be damaged.

5. Film. After the shape is set, the inner glass is sprayed with some detergent, and the surface of the film that is torn off the protective film also needs to be sprayed.

6. Catch water. There are very likely to be some bubbles and water during the whole process of installation, use a Yangtze River Delta plastic scraper to carry out the water, if you don't have such special tools, you can also use a hard credit card such as a savings card or VIP card instead.

7. Inspection. Check whether there are bubbles between the sun film and the glass, whether the adhesive is firm, whether there are wrinkles, whether there are scratches, etc., if there is no problem, use a cotton towel to clean the water on the edge of the glass.