2014 Regal 1 6T Fashion Technology Edition has no tire pressure alarm

This one is not available, you can add one yourself if you need it. If my answer is helpful to you, please set it to. Thank you!

There shouldn't be this feature.

Regal is a sedan owned by Buick, the length, width and height of this car are 4902 mm, 1863 mm, 1456 mm, and the wheelbase is 2829 mm.

Regal tire pressure problems. Three months ago, the first cold search and burial tires hit 240, and now it is almost 3 months, and there are only 208 cold tires. I asked my son's shop and said that it was less than 200 before calling the police, and the pressure of the four tires was very average!

Regal tire pressure problems. Three months ago, the first cold tire was 240, and now it is almost 3 months, and the cold tire is only 208. And the pressure reduction of the four tires is very even!

Suggestion: 1. Mainly because the weather temperature is lower now, it still has an impact on the tire pressure, when the tire pressure is lower than 200, there will be an alarm reminder, you can go to the repair shop to recharge the tire pressure.

2. If the tire pressure is reduced at the same time for all four tires, then this should be caused by the influence of the external temperature and leakage (the tire pressure is hot and cold expanding and contracting, and there will be natural loss), it is recommended to supplement the tire pressure.

3. It's almost the same when you hit 220, cold 240, run for a while The tire pressure rises, it's too hard, and the shock absorption is uncomfortable.

4. Due to temperature, tire pressure will fluctuate.

Other additions: 1. The good thing is that I feel that the tire pressure has dropped too quickly in three months.

2. It is not a matter of time, but the influence of temperature.

3. The good thing is that I feel that the tire pressure has dropped too quickly in three months.

Photo by Pacific Automobile Network Q&A).

Press the "Menu" button on the turn indicator lever, select the "Tire Pressure Display" item in the "Mileage Fuel Information Menu", and then press the SET CLR button.

Eliminate **Regal tire pressure warning light method steps:

1.Turn on the ignition to the "on" position, press the tire pressure reset button set and hold it for about 3s until a "gear" sound in the gauge and the tire pressure alarm light will go out.

2.Connect VAS5052, enter the basic setting function of ABS(03) (006), enter the channel number 42 and activate it, the display screen will display "tire pressure reset completed", and the tire pressure warning light on the instrument will be extinguished after exiting the system.

3.Connect the VAS5052, enter the guiding function, select "Anti-lock Braking System", select "Tire - Inspection - Display Tire Pressure Alarm" to open the submenu, select "-3 - Tire Monitoring to Restore to the Initial State" according to the prompts, and then press the prompts to confirm.

There is a switch in the car, and the location is shown in the manual.

After 12 years, Buick series models do not support manual reset, can only use the tire pressure reset instrument for tire pressure reset, 4S and some repair shops have, in fact, this reset instrument is not expensive, about 150 yuan, Ma Yun's family some tire pressure monitoring shops can put a deposit to borrow the tire pressure reset instrument, only the round-trip express cost.

The reset instrument is shown below.

Here's how to use it:

1.The gear lever is placed on "P", the ignition switch is turned on to ON, the tire pressure display interface is displayed, and "press the SET Ctrl key to re-learn", press the SET CTRL key, the turn signal starts for 3 seconds and the horn beeps twice to enter the learning mode. 2.

Starting from the left front wheel, press the reset antenna upwards against the valve core, close to the tire sidewall of the hub, press the tool start switch, and when the horn beeps out, the tire pressure sensor information has been read. 3.According to the above-mentioned method, the right front right rear left rear wheel wheel speed sensor is read in turn, and when the learning process is over, the turn signal starts for 3 seconds and the horn beeps twice.

Buick Regal has tire pressure monitoring, Buick Regal tire pressure monitoring matching method: 1. Press and hold the ODO and TRIP buttons to switch the mileage display on the instrument cluster until only the total mileage is displayed; 2. Press the ODO, TRIP button again and hold it, after a few seconds, the tire pressure is too low indicator light starts to flash, when you hear two beeps, it indicates that the match is complete.

Buick Regal is a Buick mid-to-high-end sedan, positioned between Yinglang and LaCrosse, its contemporary appearance, humanized exquisite interior and luxurious high-tech configuration, fully embodies the respect for successful leaders, unique V6 strong power and quiet and smooth driving experience to meet people's high requirements for business cars.

Buick Regal tire replacement example tutorial:

1. Ensure that the car is parked on the ground with a firm level, and if there is a problem on the road, the safety warning equipment must be placed later. Then disassemble several fixed nuts of the tire, and the disassembly and assembly of the nuts should be disassembled in accordance with the order of the top angle, otherwise the rim may be damaged.

2. The hydraulic jack points to the fulcrum at the bottom of the car, and then slowly rises the car, and the tires can be disassembled after rising to a certain height-width ratio. Since the fusion is inseparable, sometimes the tires can't be reached, so you can kick it moderately with your stride energy.

3. Put the new car tires in time, and then slowly learn to put the car down. The nut is tightened with a common tool, and the method of tightening the top angle should be paid attention to, and the nut can only be used when the car learns to put down the tire and touch the road.

Photo by Q&A) @2019