How to remove moss from the ground

How to remove moss from the river.

Moss is a general term for a variety of algae, and it is a big problem to solve the harm of moss on the water surface, and there is no effective way at present. After checking the information, it is recommended to try the following methods. 1.

frequent salvage; 2.Copper sulfate elimination method: sprinkle with grams of copper sulfate per cubic meter; 3.

Blue alum elimination method: 2 kg of blue alum per mu of water surface, 3 kg, 20 kg of water, spraying; 4.Try the "moss Saike" produced by Nanjing Furunde Animal Pharmaceutical Co., Ltd., and use 200 grams of this product per mu of water surface (1 meter water depth); 5.

Duck farming. Ecological restoration is a systematic project, simply put, it is to restore and improve the ecosystem of the river, and use a variety of organisms to eliminate the problem of eutrophication of the water body. How to implement ecological restoration in your river should be formulated according to the specific situation.

How to remove moss from water.

No matter what you raise, you can't get rid of the moss in the cement pool. It is recommended that you take out the red carp, sprinkle a little lime, after a day, the moss can be removed, and then drain the water in the pool, refill the water, and put in the red carp.

How to remove moss from a fish tank.

The main reasons for moss growing in fish tanks are as follows:

1.Raising too many tropical fish; 2.too much nutrients in the water, especially too many nitrogenous compounds; 3.Possibly direct sunlight. 4.water pollution, excrement failure to clean up in time; 5.Insufficient amount of dissolved oxygen.

Moss multiplies quickly, so it's best to clear it as it goes. The main methods of prevention are:

1.reducing the number of fish;

2.Insist on regular water changes, such as a quarter to a third of the water once a week, to reduce excess waste and reduce nitrates and phosphates in the water;

3.Control the amount of feeding, eat twice a day, 5-10 minutes each time, and leave no residual bait in the tank;

4.Honey planting aquatic plants, planting the bottom bed to the full, leaving no blanks;

5.Protect from direct sunlight;

6.the use of moss removers (algaecides);

7.Add lichenivorous fish and shrimp;

8.Enhanced filtration.

All in all, although there are many ways to remove moss, none of them are perfect, and it is best to prevent them. You can have a magnetic brush specially used to clean the moss on the glass wall, and clean the moss from the tank wall at any time of the week.

First use a moss remover to kill moss, and then spray moss inhibitors when the weather is good, which can prevent moss regeneration all year round.

The method of permanent removal of ground moss is as follows:1. Rinse the moss with water, and wipe the moss with a brush while rinsing.

2. Sprinkle some edible salt evenly on the place where the moss appears, and then brush it repeatedly with a brush after a while.

3. Boiling water Boil a pot of boiling water, then pour the boiled water on the moss, brush off the process with a brush, if there is any residue, you can operate it again in the same way, and you can wear rain boots when boiling water to avoid burns.

4. Some fungi produce moss in the wet shade environment, and they rise again in spring, which is also the period when moss begins to reproduce and grow. It is non-toxic and grows in cold, humid areas.

5. The disinfectant water bought in the supermarket can be removed, prepare a small basin, unscrew the disinfectant water, pour some into the basin, pour it out according to the amount of moss in the ground, and then add a little water to the basin, so that the disinfectant water is mixed later, stir it, let it mix evenly, the effect will be better, after mixing, sprinkle some moss on the ground with moss.

Summary. Kiss! The way to permanently remove moss from the ground is:

1. The main physical and chemical methods of moss elimination are the physical and chemical methods, and the physical methods are to remove the stagnant water on the road surface in direct sunlight and brush with a brush. 2. The chemical method is mainly copper sulfate and ferrous sulfate, with concentrations of about 1ppm and 1-2ppm respectively; Mix blue alum with water; Use a moss remover (50 mg L of Xinjieer algae killer); It can be removed with bleaching powder, quicklime. Moss is produced by some fungi in a humid and shady environment, and it rises in the spring season, and it is also the period when moss begins to multiply and grow, and it grows like hair on the ground and walls in the morning.

It is non-toxic, because the humid environment is suitable for the growth of fungi, so they settle there, and the moss is suitable for growing in cold and damp places.

How to remove the moss from the ground permanently.

Kiss! The methods for permanent removal of moss on the ground are: 1. The main physical and chemical methods for removing moss are the physical and chemical methods, and the physical methods are to remove the stagnant water on the road surface in direct sunlight and brush with a brush.

2. The chemical method is mainly copper sulfate and ferrous sulfate, with concentrations of about 1ppm and 1-2ppm respectively; Mix blue alum with water; Use a moss remover (50 mg L of Xinjieer algae killer); It can be removed with bleaching powder, quicklime. Moss is produced by some fungi in a humid and shady environment, and it rises in the spring season, and it is also the period when moss begins to multiply and grow, and it grows like hair on the ground and walls in the morning. It is non-toxic, because the humid environment is suitable for the growth of fungi, so they settle there, and the moss is suitable for growing in cold and damp places.

2. You can also use a moss remover to spray on the moss, and then use a brush to clean it up. 3. Usually clean up frequently, clean up the cement pavement with stagnant water, and there will be no moss if there is no stagnant water.

Tools and materials to be prepared: sprayers, moss net (moss removal agent), high-pressure water gun.

How to remove moss:

1. According to the ground area, put the appropriate amount of medicine into the barrel of the sprayer, this kind of medicine is sold in the market.

2. After adding the agent, use a container to connect an appropriate amount of water and add it to it.

3. Spray the mixed solution evenly on the moss.

4. After spraying the agent, use a high-pressure water gun to spray, and the ground will be as clean as ever.

Buy a bottle of disinfectant from the supermarket, any brand of water, usually buy whichever one is easy to use, prepare a small basin, and finally find a small stick.

Unscrew the disinfectant and pour it into a basin to pour more or less depending on the amount of moss on the ground.

Then add some water to the basin and add it until you think it's about the same, don't add too much to make it work.

Stir it with a small stick to make it mix a little more evenly, and the effect will be a little better.

And when it's mixed, sprinkle some of it on the mossy ground, and it's the moss on the ground, and it's going to be gone, and it's very smart.

After sprinkling, remember to wash your hands, and also brush the used basin, disinfectant water will be bad.

Special Tips. Be careful not to splash disinfectant water in your eyes.

Wear disposable gloves when pouring disinfectant.

Brush the used basin.

1. How to completely remove the moss on the cement floor: dilute and stir the moss remover with water according to the instructions, and paint it on the moss on the cement ground. After leaving for about 1 hour, the moss can be brushed off with a long-handled stiff brush and rinsed off with water.

In order to prevent moss from growing on the road surface in the later stage, we can do some preventive measures. After the cement pavement is dried, we dilute the moss long-term inhibitor as required and continue to apply it to the cement pavement, the moss remover can be applied 3 times, and then the stabilizer is sprayed on the pavement and it is dried.

2. You can sprinkle the cherry blossoms with quicklime powder evenly on the moss on the cement floor, and then water the moss. The lime and water react chemically and boil, creating a high temperature that kills the moss. After the lime is no longer reacting, everyone uses a long-handled stiff brush to scrub the moss clean.

You can also shovel the moss and soil directly, or use a high-pressure water gun to remove the moss, etc. After the moss is cleaned up, you can apply moss inhibitors to prevent the moss from growing again.

3. How to maintain the cement pavement: you can regularly use a sprinkler to spray the pavement to eliminate the block, for example, the temperature is high in summer, and the sprinkler sprinkler can play a role in cooling the pavement and reduce the probability of cracking the cement pavement. In addition, the sprinkler truck also has a cleaning job, such as washing the mud and sand off the road surface by taking a high-pressure water gun.

Dirt on the cement pavement should be cleared out in time.

4. Cement pavement is prone to various quality problems such as cracking, sanding, and potholes. We found that there are these quality problems in the cement floor, and we should repair them in time. If the pavement is not repaired for a long time, it will lead to the expansion of cracks and so on.

If there is a quality problem with the cement pavement, you can ask a professional repair team to repair it.